|
 |
25volt |
1.0.5-1 |
25volt - A lightweight tool for monitoring APC Smart-UPS and Powercom WOW UPSs. |
|
3proxy |
0.9.4-1 |
3proxy is universal proxy server. It can be used to provide internal users with fully controllable access to external resources or to provide external users with access to internal resources. Note: SSL plugin requires libopenssl to be installed. |
|
6relayd |
2013-12-10.1-0381cf15e9721054f902354e9c3b9fb0201bab7f |
6relayd is a daemon for serving and relaying IPv6 management protocols to configure clients and downstream routers. 6relayd provides server services for RA, stateless DHCPv6, DHCPv6-PD and can be used to relay RA, DHCPv6 and NDP between routed (non-bridged) interfaces in case no delegated prefixes are provided by the upstream router. |
|
7-zip |
24.07-1 |
File archiver with a high compression ratio. |
|
accel-ppp |
1.12.0-1 |
The ACCEL-PPP is high performance PPTP/L2TP/PPPoE server for Linux. Userspace daemon has its own PPP implementation, so it does not uses pppd and one process (multi-threaded) manages all connections. |
|
acl |
2.3.2-2 |
Access control list support This package provides ACL manipulation utilities - chacl - getfacl - setfacl |
|
adb |
android.5.0.2_r1-3 |
Android Debug Bridge (adb) is a versatile command line tool that lets you communicate with an emulator instance or connected Android-powered device. |
|
addrwatch |
1.0.2-3 |
This is a tool similar to arpwatch. It main purpose is to monitor network and log discovered ethernet/ip pairings. Addrwatch is extremely useful in networks with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6 addresses of hosts using IPv6 privacy extensions (RFC4941). This contains the main addrwatch program. |
|
adguardhome-go |
v0.107.52-1 |
AdGuard Home is a network-wide software for blocking ads and tracking. |
|
afpfs-ng |
0.8.2-1 |
afpfs-ng is an Apple Filing Protocol client that will allow BSD, Linux and Mac OS X systems to access files exported from a Mac OS system with AFP over TCP. |
|
agetty |
2.40.1-1 |
agetty opens a tty port, prompts for a login name and invokes the /bin/login command |
|
aggregate |
1.6-3 |
takes a list of prefixes in conventional format on stdin, and performs two optimisations to reduce the length of the prefix list. It removes any supplied prefixes which are supurfluous because they are already included in another supplied prefix (e.g., 203.97.2.0/24 would be removed if 203.97.0.0/17 was also supplied), and identifies adjacent prefixes that can be combined under a single, shorter-length prefix (e.g., 203.97.2.0/24 and 203.97.3.0/24 can be combined into the single prefix 203.97.2.0/23). |
|
aha |
0.5.1-1 |
Converts ANSI escape sequences of a unix terminal to HTML code. |
|
aircrack-ng |
1.7-1 |
WLAN tools for breaking 802.11 WEP/WPA keys |
|
airprint |
0.0.1-1 |
airprint is a metapackage for installing a print server for printing over Wi-Fi. |
|
airsane |
0.4.1-1 |
Publish SANE scanners to MacOS and Android via Apple AirScan. |
|
alaya |
4.5-1 |
A webdav enabled webserver mostly focused on file storage. |
|
alertmanager |
0.27.0-1 |
The Alertmanager handles alerts sent by client applications such as the Prometheus server. It takes care of deduplicating, grouping, and routing them to the correct receiver integrations such as email, PagerDuty, OpsGenie, or many other mechanisms thanks to the webhook receiver. It also takes care of silencing and inhibition of alerts. |
 |
alsa-lib |
1.2.11-1 |
This is the library package for alsa, needed by some userspace programs. You must have enabled the ALSA support in the kernel. |
|
alsa-ucm-conf |
1.2.11-1 |
This is a set of configuration files needed for some ALS utilities like alsactl. |
|
alsa-utils |
1.2.11-1 |
ALSA (Advanced Linux Sound Architecture) utilities |
|
alsa-utils-seq |
1.2.11-1 |
ALSA sequencer utilities |
|
alsa-utils-tests |
1.2.11-1 |
ALSA utilities test data (adds ~1.3M to image) |
|
amule |
2.3.3-3 |
A multi-platform eMule-like ed2k client |
|
angband |
4.2.5-1 |
Angband is a single-player, text-based, dungeon simulation derived from the game Moria, which was in turn based on Rogue. It is often described as a \"roguelike\" game because the look and feel of the game is still quite similar to Rogue. |
|
apache |
2.4.59-1 |
The Apache HTTP Server Project is a collaborative software development effort aimed at creating a robust, commercial-grade, featureful, and freely-available source code implementation of an HTTP (Web) server. This package contains the Apache web server and utility programs. |
|
apache-ab |
2.4.59-1 |
The Apache HTTP Server Project is a collaborative software development effort aimed at creating a robust, commercial-grade, featureful, and freely-available source code implementation of an HTTP (Web) server. Apache server benchmarking utility. |
|
apache-error |
2.4.59-1 |
The Apache HTTP Server Project is a collaborative software development effort aimed at creating a robust, commercial-grade, featureful, and freely-available source code implementation of an HTTP (Web) server. Apache multi language custom error documents. |
|
apache-icons |
2.4.59-1 |
The Apache HTTP Server Project is a collaborative software development effort aimed at creating a robust, commercial-grade, featureful, and freely-available source code implementation of an HTTP (Web) server. This package contains the icons from Apache. |
|
apache-mod-deflate |
2.4.59-1 |
Deflate support for the Apache HTTP server. |
|
apache-mod-http2 |
2.4.59-1 |
HTTP/2 transport layer for the Apache HTTP Server. |
|
apache-mod-ldap |
2.4.59-1 |
LDAP authentication/authorization module for the Apache HTTP Server. |
|
apache-mod-lua |
2.4.59-1 |
Lua support for the Apache HTTP server. |
|
apache-mod-md |
2.4.59-1 |
Managed Domain handling. |
|
apache-mod-php8 |
8.3.8-2 |
PHP is a widely-used general-purpose scripting language that is especially suited for Web development and can be embedded into HTML. This package contains the PHP module for the Apache Web Server. |
|
apache-mod-proxy |
2.4.59-1 |
Proxy modules for the Apache HTTP Server. |
|
apache-mod-proxy-html |
2.4.59-1 |
HTML and XML content filters for the Apache HTTP Server. |
|
apache-mod-session-crypto |
2.4.59-1 |
Session encryption support for the Apache HTTP Server. |
|
apache-mod-ssl |
2.4.59-1 |
SSL/TLS module for the Apache HTTP Server. |
|
apache-mod-suexec |
2.4.59-1 |
suEXEC module for the Apache HTTP Server. |
|
apache-mod-webdav |
2.4.59-1 |
WebDAV support for the Apache HTTP Server. |
|
apache-suexec |
2.4.59-1 |
The Apache HTTP Server Project is a collaborative software development effort aimed at creating a robust, commercial-grade, featureful, and freely-available source code implementation of an HTTP (Web) server. This package contains the suEXEC utility from Apache. |
|
apache-utils |
2.4.59-1 |
The Apache HTTP Server Project is a collaborative software development effort aimed at creating a robust, commercial-grade, featureful, and freely-available source code implementation of an HTTP (Web) server. Apache utility programs for webservers. |
|
apcupsd |
3.14.14-5 |
UPS control software |
|
apcupsd-cgi |
3.14.14-5 |
UPS control software CGI module |
|
apinger |
2015.04.09~78eb3287-8 |
Alarm Pinger (apinger) is a little tool which monitors various IP devices by simple ICMP echo requests. There are various other tools, that can do this, but most of them are shell or perl scripts, spawning many processes, thus much CPU-expensive, especially when one wants continuous monitoring and fast response on target failure. Alarm Pinger is a single program written in C, so it doesn't need much CPU power even when monitoring many targets with frequent probes. Alarm Pinger supports both IPv4 and IPv6. The code have been tested on Linux and FreeBSD. |
|
ar |
2.42-1 |
ar |
|
archivemount |
0.9.1-1 |
Archivemount is a piece of glue code between libarchive (http://people.freebsd.org/~kientzle/libarchive/) and FUSE (http://fuse.sourceforge.net). It can be used to mount a (possibly compressed) archive (as in .tar.gz or .tar.bz2) and use it like an ordinary filesystem. |
|
aria2 |
1.37.0-1 |
aria2 is a lightweight multi-protocol & multi-source command-line download utility |
|
arp-scan |
1.10.0-2 |
ARP scanner |
|
arp-scan-database |
1.10.0-2 |
MAC database for ARP scanner |
|
arpon |
3.0-ng-1 |
ArpON (ARP handler inspection) is a Host-based solution that make the ARP standardized protocol secure in order to avoid the Man In The Middle (MITM) attack through the ARP spoofing, ARP cache poisoning or ARP poison routing attack. |
|
arptables-legacy |
0.0.5-1 |
ARP firewalling software |
|
asciinema |
2.4.0-2 |
asciinema lets you record your terminal sessions and share it with other geeks. |
|
aserver |
1.2.11-1 |
This is the aserver application for ALSA. |
|
aspell |
0.60.8.1-1 |
GNU Aspell does a superior job of suggesting possible replacements for a misspelled word than just about any other spell checker out there for the English (and some other) language. |
|
asterisk |
20.8.1-1 |
Asterisk is a complete PBX in software. It provides all of the features you would expect from a PBX and more. Asterisk does voice over IP in three protocols, and can interoperate with almost all standards-based telephony equipment using relatively inexpensive hardware. |
|
asterisk-app-adsiprog |
20.8.1-1 |
Asterisk ADSI programming application. |
|
asterisk-app-agent-pool |
20.8.1-1 |
Call center agent pool applications. |
|
asterisk-app-alarmreceiver |
20.8.1-1 |
Alarm receiver for Asterisk. |
|
asterisk-app-amd |
20.8.1-1 |
Answering Machine Detection application. |
|
asterisk-app-attended-transfer |
20.8.1-1 |
Queues up an attended transfer to a given extension. |
|
asterisk-app-audiosocket |
20.8.1-1 |
Audiosocket app. |
|
asterisk-app-authenticate |
20.8.1-1 |
Authentication application. |
|
asterisk-app-blind-transfer |
20.8.1-1 |
Redirects all channels currently bridged to the caller channel to a specified destination. |
|
asterisk-app-bridgeaddchan |
20.8.1-1 |
Bridge-add-channel application. |
|
asterisk-app-bridgewait |
20.8.1-1 |
Application to place a channel into a holding bridge. |
|
asterisk-app-broadcast |
20.8.1-1 |
Channel Audio Broadcasting. |
|
asterisk-app-celgenuserevent |
20.8.1-1 |
Generate a user defined CEL event. |
|
asterisk-app-chanisavail |
20.8.1-1 |
Check channel availability. |
|
asterisk-app-channelredirect |
20.8.1-1 |
Redirects a given channel to a dialplan target. |
|
asterisk-app-chanspy |
20.8.1-1 |
Listen to the audio of an active channel. |
|
asterisk-app-confbridge |
20.8.1-1 |
Conference bridge application. |
|
asterisk-app-controlplayback |
20.8.1-1 |
Control playback application. |
|
asterisk-app-dictate |
20.8.1-1 |
Virtual dictation machine. |
|
asterisk-app-directed-pickup |
20.8.1-1 |
Directed call pickup application. |
|
asterisk-app-directory |
20.8.1-1 |
Extension directory. |
|
asterisk-app-disa |
20.8.1-1 |
Direct Inward System Access application. |
|
asterisk-app-dtmfstore |
20.8.1-1 |
Technology independent async DTMF storage. |
|
asterisk-app-dumpchan |
20.8.1-1 |
Dump info about the calling channel. |
|
asterisk-app-exec |
20.8.1-1 |
Executes dialplan applications. |
|
asterisk-app-externalivr |
20.8.1-1 |
External IVR interface application. |
|
asterisk-app-festival |
20.8.1-1 |
Simple Festival interface. |
|
asterisk-app-followme |
20.8.1-1 |
Find-Me/Follow-Me application. |
|
asterisk-app-getcpeid |
20.8.1-1 |
Get ADSI CPE ID. |
|
asterisk-app-if |
20.8.1-1 |
If Branch and Conditional Execution. |
|
asterisk-app-ivrdemo |
20.8.1-1 |
IVR demo application. |
|
asterisk-app-mf |
20.8.1-1 |
Send MF digits Application. |
|
asterisk-app-milliwatt |
20.8.1-1 |
Digital milliwatt test application. |
|
asterisk-app-minivm |
20.8.1-1 |
A minimal voicemail e-mail system. |
|
asterisk-app-mixmonitor |
20.8.1-1 |
Mixed audio monitoring application. |
|
asterisk-app-morsecode |
20.8.1-1 |
Morse code. |
|
asterisk-app-mp3 |
20.8.1-1 |
Silly MP3 application. |
|
asterisk-app-originate |
20.8.1-1 |
Originate call. |
|
asterisk-app-page |
20.8.1-1 |
Page multiple phones. |
|
asterisk-app-playtones |
20.8.1-1 |
Playtones application. |
|
asterisk-app-privacy |
20.8.1-1 |
Require phone number to be entered if no Caller ID sent. |
|
asterisk-app-queue |
20.8.1-1 |
True call queueing. |
|
asterisk-app-read |
20.8.1-1 |
Read variable application. |
|
asterisk-app-readexten |
20.8.1-1 |
Read and evaluate extension validity. |
|
asterisk-app-record |
20.8.1-1 |
Trivial record application. |
|
asterisk-app-reload |
20.8.1-1 |
Reload module[s]. |
|
asterisk-app-saycounted |
20.8.1-1 |
Decline words according to channel language. |
|
asterisk-app-sayunixtime |
20.8.1-1 |
Say time. |
|
asterisk-app-senddtmf |
20.8.1-1 |
Send DTMF digits application. |
|
asterisk-app-sendtext |
20.8.1-1 |
Send text applications. |
|
asterisk-app-sf |
20.8.1-1 |
SF Sender and Receiver Applications. |
|
asterisk-app-signal |
20.8.1-1 |
Channel Signaling Applications. |
|
asterisk-app-skel |
20.8.1-1 |
Skeleton application. |
|
asterisk-app-sms |
20.8.1-1 |
SMS/PSTN handler. |
|
asterisk-app-softhangup |
20.8.1-1 |
Hangs up the requested channel. |
|
asterisk-app-speech |
20.8.1-1 |
Dialplan speech applications. |
|
asterisk-app-stack |
20.8.1-1 |
Dialplan subroutines. |
|
asterisk-app-stasis |
20.8.1-1 |
Stasis dialplan application. |
|
asterisk-app-statsd |
20.8.1-1 |
StatsD dialplan application. |
|
asterisk-app-stream-echo |
20.8.1-1 |
Stream echo application. |
|
asterisk-app-system |
20.8.1-1 |
Generic system application. |
|
asterisk-app-talkdetect |
20.8.1-1 |
Playback with talk detection. |
|
asterisk-app-test |
20.8.1-1 |
Interface test application. |
|
asterisk-app-transfer |
20.8.1-1 |
Transfers a caller to another extension. |
|
asterisk-app-userevent |
20.8.1-1 |
Custom user event application. |
|
asterisk-app-verbose |
20.8.1-1 |
Send verbose output. |
|
asterisk-app-voicemail |
20.8.1-1 |
Voicemail module. |
|
asterisk-app-voicemail-imap |
20.8.1-1 |
Voicemail module. |
|
asterisk-app-voicemail-odbc |
20.8.1-1 |
Voicemail module. |
|
asterisk-app-waitforcond |
20.8.1-1 |
Wait until condition is true. |
|
asterisk-app-waitforring |
20.8.1-1 |
Waits until first ring after time. |
|
asterisk-app-waitforsilence |
20.8.1-1 |
Wait for silence/noise. |
|
asterisk-app-waituntil |
20.8.1-1 |
Wait until specified time. |
|
asterisk-app-while |
20.8.1-1 |
While loops and conditional execution. |
|
asterisk-app-zapateller |
20.8.1-1 |
Block telemarketers with special information tone. |
|
asterisk-bridge-builtin-features |
20.8.1-1 |
Built in bridging features. |
|
asterisk-bridge-builtin-interval-features |
20.8.1-1 |
Built in bridging interval features. |
|
asterisk-bridge-holding |
20.8.1-1 |
Holding bridge module. |
|
asterisk-bridge-native-rtp |
20.8.1-1 |
Native RTP bridging module. |
|
asterisk-bridge-simple |
20.8.1-1 |
Simple two channel bridging module. |
|
asterisk-bridge-softmix |
20.8.1-1 |
Multi-party software based channel mixing. |
|
asterisk-cdr |
20.8.1-1 |
Call Detail Records. |
|
asterisk-cdr-csv |
20.8.1-1 |
Comma Separated Values CDR backend. |
|
asterisk-cdr-sqlite3 |
20.8.1-1 |
SQLite3 CDR backend. |
|
asterisk-cel-custom |
20.8.1-1 |
Customizable Comma Separated Values CEL backend. |
|
asterisk-cel-manager |
20.8.1-1 |
Asterisk Manager Interface CEL backend. |
|
asterisk-cel-sqlite3-custom |
20.8.1-1 |
SQLite3 custom CEL module. |
|
asterisk-chan-alsa |
20.8.1-1 |
ALSA console channel driver. |
|
asterisk-chan-audiosocket |
20.8.1-1 |
Audiosocket channel. |
|
asterisk-chan-bridge-media |
20.8.1-1 |
Bridge media channel driver. |
|
asterisk-chan-console |
20.8.1-1 |
Console channel driver. |
|
asterisk-chan-dongle |
2022.11.04~503dba87-1 |
Asterisk channel driver for Huawei UMTS 3G dongle. |
|
asterisk-chan-iax2 |
20.8.1-1 |
Inter Asterisk eXchange. |
|
asterisk-chan-mgcp |
20.8.1-1 |
Media Gateway Control Protocol. |
|
asterisk-chan-mobile |
20.8.1-1 |
Bluetooth mobile device channel driver. |
|
asterisk-chan-motif |
20.8.1-1 |
Motif Jingle channel driver. |
|
asterisk-chan-ooh323 |
20.8.1-1 |
Objective Systems H.323 channel. |
|
asterisk-chan-quectel |
3.5-1 |
Asterisk channel driver for Quectel and Simcom modules, works with Asterisk-13+. |
|
asterisk-chan-rtp |
20.8.1-1 |
RTP media channel. |
|
asterisk-chan-sccp |
2020.12.19~968caa45-2 |
Replacement for the SCCP channel driver (chan_skinny) in Asterisk. Extended features include shared lines, presence / BLF, customizable feature buttons and custom device state. |
|
asterisk-chan-sip |
20.8.1-1 |
Session Initiation Protocol. |
|
asterisk-chan-skinny |
20.8.1-1 |
Skinny Client Control Protocol. |
|
asterisk-chan-unistim |
20.8.1-1 |
UNISTIM protocol. |
|
asterisk-codec-a-mu |
20.8.1-1 |
Alaw and ulaw direct coder/decoder. |
|
asterisk-codec-adpcm |
20.8.1-1 |
Adaptive Differential PCM coder/decoder. |
|
asterisk-codec-alaw |
20.8.1-1 |
Alaw coder/decoder. |
|
asterisk-codec-g722 |
20.8.1-1 |
ITU G.722-64kbps G722 transcoder. |
|
asterisk-codec-g726 |
20.8.1-1 |
ITU G.726-32kbps G726 transcoder. |
|
asterisk-codec-g729 |
1.4.3-1 |
Asterisk G.729 codec based on bcg729 implementation. |
|
asterisk-codec-gsm |
20.8.1-1 |
GSM coder/decoder. |
|
asterisk-codec-ilbc |
20.8.1-1 |
iLBC coder/decoder. |
|
asterisk-codec-lpc10 |
20.8.1-1 |
LPC10 2.4kbps coder/decoder. |
|
asterisk-codec-opus |
2021.11.01~20522fbc-2 |
Opus is the default audio codec in WebRTC. WebRTC is available in Asterisk via SIP over WebSockets (WSS). Nevertheless, Opus can be used for other transports (UDP, TCP, TLS) as well. Opus supersedes previous codecs like CELT and SiLK. Furthermore, in favor of Opus, other open-source audio codecs are no longer developed, like Speex, iSAC, iLBC, and Siren. If you use your Asterisk as a back-to-back user agent (B2BUA) and you transcode between various audio codecs, one should enable Opus for future compatibility. Opus is not only supported for pass-through but can be transcoded as well. |
|
asterisk-codec-resample |
20.8.1-1 |
SLIN resampling codec. |
|
asterisk-codec-ulaw |
20.8.1-1 |
Ulaw coder/decoder. |
|
asterisk-curl |
20.8.1-1 |
cURL |
|
asterisk-format-g719 |
20.8.1-1 |
ITU G.719. |
|
asterisk-format-g723 |
20.8.1-1 |
G.723.1 simple timestamp file format. |
|
asterisk-format-g726 |
20.8.1-1 |
Raw G.726 data. |
|
asterisk-format-g729 |
20.8.1-1 |
Raw G.729 data. |
|
asterisk-format-gsm |
20.8.1-1 |
Raw GSM data. |
|
asterisk-format-h263 |
20.8.1-1 |
Raw H.263 data. |
|
asterisk-format-h264 |
20.8.1-1 |
Raw H.264 data. |
|
asterisk-format-ilbc |
20.8.1-1 |
Raw iLBC data. |
|
asterisk-format-ogg-opus |
2021.11.01~20522fbc-2 |
Reading and writing audio files in the OGG/Opus format. |
|
asterisk-format-ogg-vorbis |
20.8.1-1 |
OGG/Vorbis audio. |
|
asterisk-format-pcm |
20.8.1-1 |
Raw/Sun ulaw/alaw 8KHz and G.722 16Khz. |
|
asterisk-format-siren14 |
20.8.1-1 |
ITU G.722.1 Annex C. |
|
asterisk-format-siren7 |
20.8.1-1 |
ITU G.722.1. |
|
asterisk-format-sln |
20.8.1-1 |
Raw signed linear audio support 8khz-192khz. |
|
asterisk-format-vox |
20.8.1-1 |
Dialogic VOX file format. |
|
asterisk-format-wav |
20.8.1-1 |
Microsoft WAV/WAV16 format. |
|
asterisk-format-wav-gsm |
20.8.1-1 |
Microsoft WAV format. |
|
asterisk-func-aes |
20.8.1-1 |
AES dialplan functions. |
|
asterisk-func-base64 |
20.8.1-1 |
Base64 encode/decode dialplan functions. |
|
asterisk-func-blacklist |
20.8.1-1 |
Look up Caller ID name/number from blacklist database. |
|
asterisk-func-callcompletion |
20.8.1-1 |
Call control configuration function. |
|
asterisk-func-channel |
20.8.1-1 |
Channel information dialplan functions. |
|
asterisk-func-config |
20.8.1-1 |
Asterisk configuration file variable access. |
|
asterisk-func-cut |
20.8.1-1 |
Cut out information from a string. |
|
asterisk-func-db |
20.8.1-1 |
Database related dialplan functions. |
|
asterisk-func-devstate |
20.8.1-1 |
Gets or sets a device state in the dialplan. |
|
asterisk-func-dialgroup |
20.8.1-1 |
Dialgroup dialplan function. |
|
asterisk-func-dialplan |
20.8.1-1 |
Dialplan context/extension/priority checking functions. |
|
asterisk-func-enum |
20.8.1-1 |
ENUM related dialplan functions. |
|
asterisk-func-env |
20.8.1-1 |
Environment/filesystem dialplan functions. |
|
asterisk-func-evalexten |
20.8.1-1 |
Extension evaluation functions. |
|
asterisk-func-export |
20.8.1-1 |
Set variables and functions on other channels. |
|
asterisk-func-extstate |
20.8.1-1 |
Gets the state of an extension in the dialplan. |
|
asterisk-func-frame-drop |
20.8.1-1 |
Function to drop frames on a channel. |
|
asterisk-func-frame-trace |
20.8.1-1 |
Frame trace for internal ast_frame debugging. |
|
asterisk-func-global |
20.8.1-1 |
Variable dialplan functions. |
|
asterisk-func-groupcount |
20.8.1-1 |
Channel group dialplan functions. |
|
asterisk-func-hangupcause |
20.8.1-1 |
Hangup cause related functions and applications. |
|
asterisk-func-holdintercept |
20.8.1-1 |
Hold interception dialplan function. |
|
asterisk-func-iconv |
20.8.1-1 |
Charset conversions. |
|
asterisk-func-jitterbuffer |
20.8.1-1 |
Jitter buffer for read side of channel. |
|
asterisk-func-json |
20.8.1-1 |
JSON decoding function. |
|
asterisk-func-lock |
20.8.1-1 |
Dialplan mutexes. |
|
asterisk-func-math |
20.8.1-1 |
Mathematical dialplan function. |
|
asterisk-func-md5 |
20.8.1-1 |
MD5 digest dialplan functions. |
|
asterisk-func-module |
20.8.1-1 |
Checks if Asterisk module is loaded in memory. |
|
asterisk-func-periodic-hook |
20.8.1-1 |
Periodic dialplan hooks. |
|
asterisk-func-pitchshift |
20.8.1-1 |
Audio effects dialplan functions. |
|
asterisk-func-presencestate |
20.8.1-1 |
Gets or sets a presence state in the dialplan. |
|
asterisk-func-rand |
20.8.1-1 |
Random number dialplan function. |
|
asterisk-func-realtime |
20.8.1-1 |
Read/write/store/destroy values from a realtime repository. |
|
asterisk-func-sayfiles |
20.8.1-1 |
Say application files. |
|
asterisk-func-scramble |
20.8.1-1 |
Frequency inverting voice scrambler. |
|
asterisk-func-sha1 |
20.8.1-1 |
SHA-1 computation dialplan function. |
|
asterisk-func-shell |
20.8.1-1 |
Collects the output generated by a command executed by the system shell. |
|
asterisk-func-sorcery |
20.8.1-1 |
Get a field from a sorcery object. |
|
asterisk-func-sprintf |
20.8.1-1 |
SPRINTF dialplan function. |
|
asterisk-func-srv |
20.8.1-1 |
SRV related dialplan functions. |
|
asterisk-func-sysinfo |
20.8.1-1 |
System information related functions. |
|
asterisk-func-talkdetect |
20.8.1-1 |
Talk detection dialplan function. |
|
asterisk-func-uri |
20.8.1-1 |
URI encode/decode dialplan functions. |
|
asterisk-func-version |
20.8.1-1 |
Get Asterisk version/build info. |
|
asterisk-func-vmcount |
20.8.1-1 |
Indicator for whether a voice mailbox has messages in a given folder. |
|
asterisk-func-volume |
20.8.1-1 |
Technology independent volume control. |
|
asterisk-odbc |
20.8.1-1 |
ODBC support. |
|
asterisk-pbx-ael |
20.8.1-1 |
Asterisk Extension Language compiler. |
|
asterisk-pbx-dundi |
20.8.1-1 |
Distributed Universal Number Discovery. |
|
asterisk-pbx-loopback |
20.8.1-1 |
Loopback switch. |
|
asterisk-pbx-lua |
20.8.1-1 |
Lua PBX switch. |
|
asterisk-pbx-realtime |
20.8.1-1 |
Realtime switch. |
|
asterisk-pbx-spool |
20.8.1-1 |
Outgoing spool support. |
|
asterisk-pgsql |
20.8.1-1 |
PostgreSQL support. |
|
asterisk-pjsip |
20.8.1-1 |
PJSIP SIP stack. |
|
asterisk-res-adsi |
20.8.1-1 |
ADSI resource. |
|
asterisk-res-aeap |
20.8.1-1 |
AEAP resource. |
|
asterisk-res-ael-share |
20.8.1-1 |
Shareable code for AEL. |
|
asterisk-res-agi |
20.8.1-1 |
Asterisk Gateway Interface. |
|
asterisk-res-ari |
20.8.1-1 |
Asterisk RESTful Interface. |
|
asterisk-res-ari-applications |
20.8.1-1 |
RESTful API module - Stasis application resources. |
|
asterisk-res-ari-asterisk |
20.8.1-1 |
RESTful API module - Asterisk resources. |
|
asterisk-res-ari-bridges |
20.8.1-1 |
RESTful API module - bridge resources. |
|
asterisk-res-ari-channels |
20.8.1-1 |
RESTful API module - channel resources. |
|
asterisk-res-ari-device-states |
20.8.1-1 |
RESTful API module - device state resources. |
|
asterisk-res-ari-endpoints |
20.8.1-1 |
RESTful API module - endpoint resources. |
|
asterisk-res-ari-events |
20.8.1-1 |
RESTful API module - WebSocket resource. |
|
asterisk-res-ari-mailboxes |
20.8.1-1 |
RESTful API module - mailboxes resources. |
|
asterisk-res-ari-model |
20.8.1-1 |
ARI model validators. |
|
asterisk-res-ari-playbacks |
20.8.1-1 |
RESTful API module - playback control resources. |
|
asterisk-res-ari-recordings |
20.8.1-1 |
RESTful API module - recording resources. |
|
asterisk-res-ari-sounds |
20.8.1-1 |
RESTful API module - sound resources. |
|
asterisk-res-audiosocket |
20.8.1-1 |
Audiosocket resource module. |
|
asterisk-res-calendar |
20.8.1-1 |
Asterisk calendar integration. |
|
asterisk-res-calendar-caldav |
20.8.1-1 |
Asterisk CalDAV calendar integration. |
|
asterisk-res-calendar-ews |
20.8.1-1 |
Asterisk MS Exchange Web Service calendar integration. |
|
asterisk-res-calendar-exchange |
20.8.1-1 |
Asterisk MS Exchange calendar integration. |
|
asterisk-res-calendar-icalendar |
20.8.1-1 |
Asterisk iCalendar .ics file integration. |
|
asterisk-res-chan-stats |
20.8.1-1 |
Example of how to use Stasis. |
|
asterisk-res-clialiases |
20.8.1-1 |
CLI aliases. |
|
asterisk-res-cliexec |
20.8.1-1 |
Simple dialplan execution from the CLI. |
|
asterisk-res-clioriginate |
20.8.1-1 |
Call origination and redirection from the CLI. |
|
asterisk-res-config-ldap |
20.8.1-1 |
LDAP realtime interface. |
|
asterisk-res-config-mysql |
20.8.1-1 |
MySQL realtime configuration driver. |
|
asterisk-res-config-sqlite3 |
20.8.1-1 |
SQLite3 realtime config engine. |
|
asterisk-res-convert |
20.8.1-1 |
File format conversion CLI command. |
|
asterisk-res-endpoint-stats |
20.8.1-1 |
Endpoint statistics. |
|
asterisk-res-fax |
20.8.1-1 |
Generic FAX applications. |
|
asterisk-res-fax-spandsp |
20.8.1-1 |
Spandsp G.711 and T.38 FAX technologies. |
|
asterisk-res-format-attr-celt |
20.8.1-1 |
CELT format attribute module. |
|
asterisk-res-format-attr-g729 |
20.8.1-1 |
G.729 format attribute module. |
|
asterisk-res-format-attr-h263 |
20.8.1-1 |
H.263 format attribute module. |
|
asterisk-res-format-attr-h264 |
20.8.1-1 |
H.264 format attribute module. |
|
asterisk-res-format-attr-ilbc |
20.8.1-1 |
iLBC format attribute module. |
|
asterisk-res-format-attr-opus |
20.8.1-1 |
Opus format attribute module. |
|
asterisk-res-format-attr-silk |
20.8.1-1 |
SILK format attribute module. |
|
asterisk-res-format-attr-siren14 |
20.8.1-1 |
Siren14 format attribute module. |
|
asterisk-res-format-attr-siren7 |
20.8.1-1 |
Siren7 format attribute module. |
|
asterisk-res-format-attr-vp8 |
20.8.1-1 |
VP8 format attribute module. |
|
asterisk-res-geolocation |
20.8.1-1 |
Geolocation support. |
|
asterisk-res-hep |
20.8.1-1 |
HEPv3 API. |
|
asterisk-res-hep-pjsip |
20.8.1-1 |
PJSIP HEPv3 logger. |
|
asterisk-res-hep-rtcp |
20.8.1-1 |
RTCP HEPv3 logger. |
|
asterisk-res-http-media-cache |
20.8.1-1 |
HTTP media cache backend. |
|
asterisk-res-http-websocket |
20.8.1-1 |
HTTP WebSocket support. |
|
asterisk-res-limit |
20.8.1-1 |
Resource limits. |
|
asterisk-res-manager-devicestate |
20.8.1-1 |
Manager device state topic forwarder. |
|
asterisk-res-manager-presencestate |
20.8.1-1 |
Manager presence state topic forwarder. |
|
asterisk-res-monitor |
20.8.1-1 |
Call monitoring resource. |
|
asterisk-res-musiconhold |
20.8.1-1 |
Music On Hold resource. |
|
asterisk-res-mutestream |
20.8.1-1 |
Mute audio stream resources. |
|
asterisk-res-mwi-devstate |
20.8.1-1 |
This module allows presence subscriptions to voicemail boxes. This allows common BLF keys to act as voicemail waiting indicators. |
|
asterisk-res-mwi-external |
20.8.1-1 |
Core external MWI resource. |
|
asterisk-res-mwi-external-ami |
20.8.1-1 |
AMI support for external MWI. |
|
asterisk-res-parking |
20.8.1-1 |
Call parking resource. |
|
asterisk-res-phoneprov |
20.8.1-1 |
HTTP phone provisioning. |
|
asterisk-res-pjproject |
20.8.1-1 |
PJProject log and utility support. |
|
asterisk-res-pjsip-aoc |
20.8.1-1 |
PJSIP AOC Support. |
|
asterisk-res-pjsip-geolocation |
20.8.1-1 |
PJSIP Geolocation support. |
|
asterisk-res-pjsip-phoneprov |
20.8.1-1 |
PJSIP phone provisioning. |
|
asterisk-res-pjsip-rfc3329 |
20.8.1-1 |
PJSIP RFC3329 Support (partial). |
|
asterisk-res-pjsip-stir-shaken |
20.8.1-1 |
PJSIP STIR/SHAKEN resource module. |
|
asterisk-res-pktccops |
20.8.1-1 |
PktcCOPS manager for MGCP. |
|
asterisk-res-prometheus |
20.8.1-1 |
Prometheus resource module. |
|
asterisk-res-realtime |
20.8.1-1 |
Realtime data lookup/rewrite. |
|
asterisk-res-remb-modifier |
20.8.1-1 |
REMB modifier module. |
|
asterisk-res-resolver-unbound |
20.8.1-1 |
Unbound DNS resolver support. |
|
asterisk-res-rtp-asterisk |
20.8.1-1 |
Asterisk RTP stack. |
|
asterisk-res-rtp-multicast |
20.8.1-1 |
Multicast RTP engine. |
|
asterisk-res-security-log |
20.8.1-1 |
Security event logging. |
|
asterisk-res-smdi |
20.8.1-1 |
Simplified Message Desk Interface resource. |
|
asterisk-res-snmp |
20.8.1-1 |
SNMP agent for Asterisk. |
|
asterisk-res-sorcery |
20.8.1-1 |
Sorcery backend modules for data access intended for using realtime as backend. |
|
asterisk-res-sorcery-memory-cache |
20.8.1-1 |
Sorcery memory cache object wizard. |
|
asterisk-res-speech |
20.8.1-1 |
Generic speech recognition API. |
|
asterisk-res-speech-aeap |
20.8.1-1 |
AEAP Speech Engine support. |
|
asterisk-res-srtp |
20.8.1-1 |
Secure RTP. |
|
asterisk-res-stasis |
20.8.1-1 |
Stasis application support. |
|
asterisk-res-stasis-answer |
20.8.1-1 |
Stasis application answer support. |
|
asterisk-res-stasis-device-state |
20.8.1-1 |
Stasis application device state support. |
|
asterisk-res-stasis-mailbox |
20.8.1-1 |
Stasis application mailbox support. |
|
asterisk-res-stasis-playback |
20.8.1-1 |
Stasis application playback support. |
|
asterisk-res-stasis-recording |
20.8.1-1 |
Stasis application recording support. |
|
asterisk-res-stasis-snoop |
20.8.1-1 |
Stasis application snoop support. |
|
asterisk-res-statsd |
20.8.1-1 |
Statsd client support. |
|
asterisk-res-stir-shaken |
20.8.1-1 |
STIR/SHAKEN resource module. |
|
asterisk-res-stun-monitor |
20.8.1-1 |
STUN network monitor. |
|
asterisk-res-timing-pthread |
20.8.1-1 |
pthread timing interface. |
|
asterisk-res-tonedetect |
20.8.1-1 |
Tone detection module. |
|
asterisk-res-xmpp |
20.8.1-1 |
Asterisk XMPP interface. |
|
asterisk-sounds |
20.8.1-1 |
This package provides the sound-files for Asterisk. |
|
asterisk-util-aelparse |
20.8.1-1 |
Check extensions.ael file. |
|
asterisk-util-astcanary |
20.8.1-1 |
Assures Asterisk no threads have gone missing. |
|
asterisk-util-astdb2bdb |
20.8.1-1 |
Convert astdb back to Berkeley DB 1.86. |
|
asterisk-util-astdb2sqlite3 |
20.8.1-1 |
Convert astdb to SQLite 3. |
|
asterisk-util-check-expr |
20.8.1-1 |
Expression checker [older version]. |
|
asterisk-util-check-expr2 |
20.8.1-1 |
Expression checker [newer version]. |
|
asterisk-util-smsq |
20.8.1-1 |
Send messages from command line. |
|
asterisk-util-stereorize |
20.8.1-1 |
Merge two mono WAV-files to one stereo WAV-file. |
|
asterisk-util-streamplayer |
20.8.1-1 |
A utility for reading from a raw TCP stream [MOH source]. |
|
astra |
4.4.188-2 |
Astra is a software to organize Digital TV Broadcasting Service. |
|
astra-sm |
0.2.88-5 |
Astra is a professional software to organize Digital Broadcasting Service for TV operators and broadcasters, internet service providers, hotels, etc. Astra is an acronym for "Advanced Streaming Application". Astra supports many protocols and standards to receive channels from different sources. Received channels prepares and transmits into the IP network. Built-in scripting language (Lua) allow to customize business logic of the application. |
|
at |
3.2.5-1 |
At and batch read shell commands from standard input storing them as a job to be scheduled for execution in the future. |
|
at |
3.2.5-1 |
At and batch read shell commands from standard input storing them as a job to be scheduled for execution in the future. (Special version for Keenetic routers) |
|
atop |
2.7.1-1 |
Atop is an ASCII full-screen performance monitor for Linux that is capable of reporting the activity of all processes (even if processes have finished during the interval), daily logging of system and process activity for long-term analysis, highlighting overloaded system resources by using colors, etcetera. At regular intervals, it shows system-level activity related to the CPU, memory, swap, disks (including LVM) and network layers, and for every process (and thread) it shows e.g. the CPU utilization, memory growth, disk utilization, priority, username, state, and exit code. In combination with the optional kernel module netatop, it even shows network activity per process/thread. |
|
attr |
2.5.2-3 |
Extended attributes support This package provides xattr manipulation utilities - attr - getfattr - setfattr |
|
autoconf |
2.72-1 |
Autoconf is an extensible package of M4 macros that produce shell scripts to automatically configure software source code packages. |
|
autofs |
5.1.9-1 |
Autofs controls the operation of the automount daemons. The automount daemons automatically mount filesystems when they are used and unmount them after a period of inactivity. |
|
automake |
1.16.5-1 |
Automake is a tool for automatically generating Makefile.in files compliant with the GNU Coding Standards. |
|
automatic |
0.9.0-1 |
Automatic is a RSS daemon that downloads torrent files matching regular expression patterns at certain intervals. |
|
autossh |
1.4g-5 |
Autossh client |
|
avahi-autoipd |
0.8-9 |
Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This package implements IPv4LL, "Dynamic Configuration of IPv4 Link-Local Addresses" (IETF RFC3927), a protocol for automatic IP address configuration from the link-local 169.254.0.0/16 range without the need for a central server. It is primarily intended to be used in ad-hoc networks which lack a DHCP server. |
|
avahi-dbus-daemon |
0.8-9 |
Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This package contains an mDNS/DNS-SD daemon. |
|
avahi-dnsconfd |
0.8-9 |
Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This package contains a Unicast DNS server from mDNS/DNS-SD configuration daemon, which may be used to configure conventional DNS servers using mDNS in a DHCP-like fashion. Especially useful on IPv6. |
|
avahi-utils |
0.8-9 |
Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This packages installs the following avahi utility programs: avahi-browse, avahi-publish, avahi-resolve, avahi-set-host-name. It also automatically adds the required libavahi-client package. For more information please see the avahi documentation. |
|
avrdude |
7.3-3 |
AVRDUDE is a full featured program for programming Atmel's AVR CPU's. |
|
axel |
2.17.14-1 |
Description: light command line download accelerator Axel tries to accelerate the downloading process by using multiple connections for one file, similar to DownThemAll and other famous programs. It can also use multiple mirrors for one download. Using Axel, you will get files faster from Internet. So, Axel can speed up a download up to 60% (approximately, according to some tests). Axel supports HTTP, HTTPS, FTP and FTPS protocols. Axel tries to be as light as possible, so it might be useful as a wget clone (and other console based programs) on byte-critical systems. |
|
bacula |
15.0.2-1 |
Bacula is a set of computer programs that permits the system administrator to manage backup, recovery, and verification of computer data across a network of computers of different kinds. Bacula can also run entirely upon a single computer and can backup to various types of media, including tape and disk. |
|
badblocks |
1.47.0-2 |
Ext2 Filesystem badblocks utility |
|
badvpn |
1.999.133-1 |
The tun2socks program "socksifes" TCP connections at the network layer. It implements a TUN device which accepts all incoming TCP connections (regardless of destination IP), and forwards the connections through a SOCKS server. This allows you to forward all connections through SOCKS, without any need for application support. It can be used, for example, to forward connections through a remote SSH server. |
|
bash |
5.2.21-1 |
Bash is an sh-compatible command language interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh). |
|
bc |
1.06.95-1 |
bc is a language that supports arbitrary precision numbers with interactive execution of statements. |
|
bcg729 |
1.1.1-1 |
Bcg729 is a software G729A encoder and decoder library written in C, developed by Belledonne Communications, the company supporting the Linphone project. It was written from scratch and is NOT a derivative work of ITU reference source code in any kind. |
|
bfgminer |
5.5.0-4 |
Modular Bitcoin ASIC/FPGA/GPU/CPU miner in C. |
|
bind-check |
9.18.24-1 |
bind administration tools (named-checkconf and named-checkzone only) |
|
bind-client |
9.18.24-1 |
bind dynamic DNS client |
|
bind-ddns-confgen |
9.18.24-1 |
bind administration tools (ddns-confgen and tsig-keygen only) |
|
bind-dig |
9.18.24-1 |
bind DNS excavation tool |
|
bind-dnssec |
9.18.24-1 |
bind administration tools (dnssec-keygen, dnssec-settime and dnssec-signzone only) |
|
bind-host |
9.18.24-1 |
bind simple DNS client |
|
bind-libs |
9.18.24-1 |
bind shared libraries |
|
bind-nslookup |
9.18.24-1 |
bind nslookup utility |
|
bind-rndc |
9.18.24-1 |
bind administration tools (rndc and rndc-confgen only) |
|
bind-server |
9.18.24-1 |
bind DNS server |
|
bind-server-filter-aaaa |
9.18.24-1 |
bind DNS server filter AAAA plugin |
|
bind-tools |
9.18.24-1 |
bind administration tools (all) |
|
bindfs |
1.17.7-1 |
bindfs - mount a directory to another location and alter permission bits. |
|
binutils |
2.42-1 |
The Binutils package contains a linker, an assembler, and other tools for handling object files |
|
bip |
0.9.2-2 |
Bip is an IRC proxy, which means it keeps connected to your preferred IRC servers, can store the logs for you, and even send them back to your IRC client(s) upon connection. |
|
bird1-ipv4 |
1.6.8-2 |
BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP protocols. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. |
|
bird1-ipv6 |
1.6.8-2 |
BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP protocols. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. |
|
bird1c-ipv4 |
1.6.8-2 |
BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. |
|
bird1c-ipv6 |
1.6.8-2 |
BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. |
|
bird1cl-ipv4 |
1.6.8-2 |
BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. |
|
bird1cl-ipv6 |
1.6.8-2 |
BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This packages the legacy v1.6 branch of Bird, which splits IPv4 and IPv6 support into separate binaries. See also the bird2 package for the newer branch which integrates support for both IP protocols in a single binary. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. |
|
bird2 |
2.14-1 |
BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. |
|
bird2c |
2.14-1 |
BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. |
|
bird2cl |
2.14-1 |
BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. |
|
bison |
3.8.2-1 |
Bison is a general-purpose parser generator |
|
bitlbee |
3.6-1 |
This program can be used as an IRC server which forwards everything you say to people on other chat networks: Jabber (which includes Google Talk and Facebook Chat), ICQ, AIM, MSN, Yahoo! and Twitter/Identica/Status.net. |
|
blkdiscard |
2.40.1-1 |
The blkdiscard is used to discard device sectors. This is useful for solid-state drivers (SSDs) and thinly-provisioned storage. Unlike fstrim, this command is used directly on the block device. |
|
blkid |
2.40.1-1 |
The blkid program is the command-line interface to working with the libblkid library. |
|
blockdev |
2.40.1-1 |
The blockdev program is the command-line interface to call block device ioctls. |
|
bluez-daemon |
5.72-2 |
Bluetooth daemon |
|
bluez-libs |
5.72-2 |
Bluetooth library |
|
bluez-utils |
5.72-2 |
Bluetooth utilities |
|
bluez-utils-btmon |
5.72-2 |
Bluetooth utilities |
|
bluez-utils-extra |
5.72-2 |
Bluetooth additional utilities |
|
bmon |
4.0-1 |
bmon is a portable bandwidth monitor and rate estimator running on various operating systems. It supports various input methods for different architectures. |
|
bochs |
2.8-1 |
Bochs is a highly portable open source IA-32 (x86) PC emulator written in C++, that runs on most popular platforms. It includes emulation of the Intel x86 CPU, common I/O devices, and a custom BIOS. |
|
bogofilter |
1.2.5-1 |
Bogofilter is a fast Bayesian spam filter |
|
boost |
1.85.0-1 |
This package provides the Boost v1.85.0 libraries. Boost is a set of free, peer-reviewed, portable C++ source libraries. This package provides the following run-time libraries: - atomic - charconv (new) - chrono - cobalt - container - context - contract - coroutine and coroutine2 (Coroutine is deprecated - use Coroutine2) - date_time - exception - filesystem - fiber - graph - - graph-parallel - iostreams - json - locale - log - math - nowide - program_options - python3 - random - regex - serialization and wserialization - stackstrace - system - thread - timer - type_erasure - url - wave There are many more header-only libraries supported by Boost. See more at http://www.boost.org/doc/libs/1_85_0/ |
|
boost-atomic |
1.85.0-1 |
This package contains the Boost atomic library. |
|
boost-chrono |
1.85.0-1 |
This package contains the Boost chrono library. |
|
boost-container |
1.85.0-1 |
This package contains the Boost container library. |
|
boost-context |
1.85.0-1 |
This package contains the Boost context library. |
|
boost-contract |
1.85.0-1 |
This package contains the Boost contract library. |
|
boost-coroutine |
1.85.0-1 |
This package contains the Boost coroutine library. |
|
boost-date_time |
1.85.0-1 |
This package contains the Boost date_time library. |
|
boost-fiber |
1.85.0-1 |
This package contains the Boost fiber library. |
|
boost-filesystem |
1.85.0-1 |
This package contains the Boost filesystem library. |
|
boost-graph |
1.85.0-1 |
This package contains the Boost graph library. |
|
boost-iostreams |
1.85.0-1 |
This package contains the Boost iostreams library. |
|
boost-json |
1.85.0-1 |
This package contains the Boost json library. |
|
boost-locale |
1.85.0-1 |
This package contains the Boost locale library. |
|
boost-log |
1.85.0-1 |
This package contains the Boost log library. |
|
boost-math |
1.85.0-1 |
This package contains the Boost math library. |
|
boost-nowide |
1.85.0-1 |
This package contains the Boost nowide library. |
|
boost-program_options |
1.85.0-1 |
This package contains the Boost program_options library. |
|
boost-python3 |
1.85.0-1 |
This package contains the Boost python3 library. |
|
boost-random |
1.85.0-1 |
This package contains the Boost random library. |
|
boost-regex |
1.85.0-1 |
This package contains the Boost regex library. |
|
boost-serialization |
1.85.0-1 |
This package contains the Boost serialization library. |
|
boost-stacktrace |
1.85.0-1 |
This package contains the Boost stacktrace library. |
|
boost-system |
1.85.0-1 |
This package contains the Boost system library. |
|
boost-test |
1.85.0-1 |
Boost C++ source library (test) |
|
boost-thread |
1.85.0-1 |
This package contains the Boost thread library. |
|
boost-timer |
1.85.0-1 |
This package contains the Boost timer library. |
|
boost-type_erasure |
1.85.0-1 |
This package contains the Boost type_erasure library. |
|
boost-url |
1.85.0-1 |
This package contains the Boost url library. |
|
boost-wave |
1.85.0-1 |
This package contains the Boost wave library. |
|
boost-wserialization |
1.85.0-1 |
This package contains the Boost wserialization library. |
|
borgbackup |
1.2.8-1 |
BorgBackup (short: Borg) is a deduplicating backup program. Optionally, it supports compression and authenticated encryption. The main goal of Borg is to provide an efficient and secure way to backup data. The data deduplication technique used makes Borg suitable for daily backups since only changes are stored. The authenticated encryption technique makes it suitable for backups to not fully trusted targets. |
|
bottom |
0.9.6-2 |
A cross-platform graphical process/system monitor with a customizable interface and a multitude of features. Supports Linux, macOS, and Windows. Inspired by both gtop and gotop. |
|
bridge |
1.7.1-1 |
Manage ethernet bridging: a way to connect networks together to form a larger network. |
|
brlaser |
6-1 |
Brlaser is a CUPS driver for Brother laser printers without PCL/PostScript language support. |
|
btpd |
0.16-20200407-1 |
BTPD is a bittorrent client consisting of a daemon and client commands, which can be used to read and/or manipulate the daemon state. The daemon is capable of running several torrents simultaneously and only uses one tcp port. It's fairly low on resource usage and should be perfect for file distribution sites. Efficient downloads and ease of use makes this client a good choice for the casual user as well. |
|
btrfs-progs |
6.9-1 |
Btrfs is a new copy on write filesystem for Linux aimed at implementing advanced features while focusing on fault tolerance, repair and easy administration. Initially developed by Oracle, Btrfs is licensed under the GPL and open for contribution from anyone. |
|
busybox |
1.36.1-1c |
The Swiss Army Knife of embedded Linux. It slices, it dices, it makes Julian Fries. |
|
byobu |
5.133-1 |
Byobu is a GPLv3 open source text-based window manager and terminal multiplexer. It was originally designed to provide elegant enhancements to the otherwise functional, plain, practical GNU Screen, for the Ubuntu server distribution. Byobu now includes an enhanced profiles, convenient keybindings, configuration utilities, and toggle-able system status notifications for both the GNU Screen window manager and the more modern Tmux terminal multiplexer, and works on most Linux, BSD, and Mac distributions. |
|
byobu-utils |
5.133-1 |
Byobu is a GPLv3 open source text-based window manager and terminal multiplexer. It was originally designed to provide elegant enhancements to the otherwise functional, plain, practical GNU Screen, for the Ubuntu server distribution. Byobu now includes an enhanced profiles, convenient keybindings, configuration utilities, and toggle-able system status notifications for both the GNU Screen window manager and the more modern Tmux terminal multiplexer, and works on most Linux, BSD, and Mac distributions. These are the "bikeshed" utilities bundled with byobu: * col1..col9, NF * ctail * manifest * purge-old-kernels * vigpg * wifi-status |
|
bzip2 |
1.0.8-1a |
bzip2 is a freely available, patent free, high-quality data compressor. This package provides the binary. |
|
cJSON |
1.7.17-1 |
Ultralightweight JSON parser in ANSI C. cJSON aims to be the dumbest possible parser that you can get your job done with. It's a single file of C, and a single header file. |
|
ca-bundle |
20240203-1 |
System CA certificates as a bundle |
|
ca-certificates |
20240203-1 |
System CA certificates |
|
cadaver |
0.24-1 |
cadaver is a command-line WebDAV client for Unix. It supports file upload, download, on-screen display, namespace operations (move/copy), collection creation and deletion, and locking operations. |
|
cal |
2.40.1-1 |
cal displays a simple calendar |
|
castget |
2.0.1-2 |
castget is a simple, command-line based RSS enclosure downloader. It is primarily intended for automatic, unattended downloading of podcasts. |
|
cavezofphear |
0.6.1-1 |
CAVEZ of PHEAR is a boulder dash / digger like game for console / terminals using ncurses. The goal of this game is to escape through the caves by collecting diamonds and avoid falling stones. |
|
ccid |
1.5.4-1 |
Generic USB CCID (Chip/Smart Card Interface Devices) driver and ICCD (Integrated Circuit(s) Card Devices). |
|
certtool |
3.8.5-1 |
GnuTLS is a secure communications library implementing the SSL, TLS and DTLS protocols and technologies around them. It provides a simple C language application programming interface (API) to access the secure communications protocols as well as APIs to parse and write X.509, PKCS12, OpenPGP and other required structures. It is aimed to be portable and efficient with focus on security and interoperability. This package contains the GnuTLS certtool utility. |
|
cfdisk |
2.40.1-1 |
cfdisk is a curses-based program for partitioning any hard disk drive |
|
cgdb |
0.8.0-1 |
Console front-end to the GNU debugger. |
|
cgdisk |
1.0.10-1 |
cgdisk is GPT aware disk partitioning tool, with interactive ncurses based UI. |
|
cgilib |
0.7-1 |
Simple CGI Library |
|
cgit |
1.2.3-3 |
Cgit is a web interface (cgi) for Git repositories, written in C This is an attempt to create a fast web interface for the Git SCM, using a built-in cache to decrease server I/O pressure. |
|
chat |
2.4.8_git20201003-2b |
This package contains an utility to establish conversation with other PPP servers (via a modem). |
|
chattr |
1.47.0-2 |
Ext2 Filesystem chattr utility |
|
check |
0.15.2-10 |
Check features a simple interface for defining unit tests, putting little in the way of the developer. Tests are run in a separate address space, so Check can catch both assertion failures and code errors that cause segmentation faults or other signals. The output from unit tests can be used within source code editors and IDEs. |
|
chezmoi |
2.50.0-1 |
Manage your dotfiles across multiple diverse machines, securely. |
|
chromaprint |
1.5.1-1 |
Chromaprint is an audio fingerprint library developed for the AcoustID project. It's designed to identify near-identical audio and the fingerprints it generates are as compact as possible to achieve that. |
|
chrony |
4.5-2 |
An NTP client and server designed to perform well in a wide range of conditions. It can synchronize the system clock with NTP servers, reference clocks, and manual input using wristwatch and keyboard. This package does NOT include NTS support. |
|
chrony-nts |
4.5-2 |
An NTP client and server designed to perform well in a wide range of conditions. It can synchronize the system clock with NTP servers, reference clocks, and manual input using wristwatch and keyboard. This package includes NTS support. |
|
ci-plus-sert |
dreamciplus_4.7r9-1 |
DVB CI+ certificates for CAM modules. |
|
cjdns |
21.1-6 |
Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. |
|
cjdns-tests |
21.1-6 |
cjdns test cases |
|
cksfv |
1.3.15-1 |
cksfv is a tool for verifying CRC32 checksums. |
|
clamav |
1.3.0-1 |
ClamAV is an open source antivirus engine for detecting trojans, viruses, malware & other malicious threats. |
|
cmake |
3.30.0-1 |
CMake is an open-source, cross-platform family of tools designed to build, test and package software. |
|
cnetflow |
3.4.5-1 |
The high-scalability sFlow/NetFlow/IPFIX collector used internally at Cloudflare. (IPFIX/NetFlow v9) |
|
cnflegacy |
3.4.5-1 |
The high-scalability sFlow/NetFlow/IPFIX collector used internally at Cloudflare. (NetFlow v5) |
|
collectd |
5.12.0-53 |
collectd is a small daemon which collects system information periodically and provides mechanismns to store the values in a variety of ways. |
|
collectd-mod-apache |
5.12.0-53 |
apache status input plugin |
|
collectd-mod-apcups |
5.12.0-53 |
apcups status input plugin |
|
collectd-mod-ascent |
5.12.0-53 |
ascent status input plugin |
|
collectd-mod-battery |
5.12.0-53 |
battery status input plugin |
|
collectd-mod-bind |
5.12.0-53 |
BIND server/zone input plugin |
|
collectd-mod-chrony |
5.12.0-53 |
chrony status input plugin |
|
collectd-mod-conntrack |
5.12.0-53 |
connection tracking table size input plugin |
|
collectd-mod-contextswitch |
5.12.0-53 |
context switch input plugin |
|
collectd-mod-cpu |
5.12.0-53 |
CPU input plugin |
|
collectd-mod-csv |
5.12.0-53 |
CSV output plugin |
|
collectd-mod-curl |
5.12.0-53 |
cURL input plugin |
|
collectd-mod-df |
5.12.0-53 |
disk space input plugin |
|
collectd-mod-disk |
5.12.0-53 |
disk usage/timing input plugin |
|
collectd-mod-dns |
5.12.0-53 |
DNS traffic input plugin |
|
collectd-mod-email |
5.12.0-53 |
email output plugin |
|
collectd-mod-entropy |
5.12.0-53 |
Entropy amount input plugin |
|
collectd-mod-ethstat |
5.12.0-53 |
Ethernet adapter statistics input plugin |
|
collectd-mod-exec |
5.12.0-53 |
process exec input plugin |
|
collectd-mod-filecount |
5.12.0-53 |
file count input plugin |
|
collectd-mod-fscache |
5.12.0-53 |
file-system based caching framework input plugin |
|
collectd-mod-interface |
5.12.0-53 |
network interfaces input plugin |
|
collectd-mod-ipstatistics |
5.12.0-53 |
ipstatistics input plugin |
|
collectd-mod-iptables |
5.12.0-53 |
iptables status input plugin |
|
collectd-mod-irq |
5.12.0-53 |
interrupt usage input plugin |
|
collectd-mod-load |
5.12.0-53 |
system load input plugin |
|
collectd-mod-logfile |
5.12.0-53 |
log files output plugin |
|
collectd-mod-lua |
5.12.0-53 |
lua input/output plugin |
|
collectd-mod-madwifi |
5.12.0-53 |
MadWifi status input plugin |
|
collectd-mod-match-empty-counter |
5.12.0-53 |
empty-counter match plugin |
|
collectd-mod-match-hashed |
5.12.0-53 |
hashed match plugin |
|
collectd-mod-match-regex |
5.12.0-53 |
regex match plugin |
|
collectd-mod-match-timediff |
5.12.0-53 |
timediff match plugin |
|
collectd-mod-match-value |
5.12.0-53 |
value match plugin |
|
collectd-mod-memory |
5.12.0-53 |
physical memory usage input plugin |
|
collectd-mod-modbus |
5.12.0-53 |
read variables through libmodbus plugin |
|
collectd-mod-mqtt |
5.12.0-53 |
transmit data with MQTT plugin |
|
collectd-mod-mysql |
5.12.0-53 |
MySQL status input plugin |
|
collectd-mod-netlink |
5.12.0-53 |
netlink input plugin |
|
collectd-mod-network |
5.12.0-53 |
network input/output plugin |
|
collectd-mod-nginx |
5.12.0-53 |
nginx status input plugin |
|
collectd-mod-ntpd |
5.12.0-53 |
NTP daemon status input plugin |
|
collectd-mod-nut |
5.12.0-53 |
UPS monitoring input plugin |
|
collectd-mod-olsrd |
5.12.0-53 |
OLSRd status input plugin |
|
collectd-mod-openvpn |
5.12.0-53 |
OpenVPN traffic/compression input plugin |
|
collectd-mod-ping |
5.12.0-53 |
ping status input plugin |
|
collectd-mod-postgresql |
5.12.0-53 |
PostgreSQL status input plugin |
|
collectd-mod-powerdns |
5.12.0-53 |
PowerDNS server status input plugin |
|
collectd-mod-processes |
5.12.0-53 |
process status input plugin |
|
collectd-mod-protocols |
5.12.0-53 |
network protocols input plugin |
|
collectd-mod-rrdtool |
5.12.0-53 |
RRDtool output plugin |
|
collectd-mod-sensors |
5.12.0-53 |
lm_sensors input plugin |
|
collectd-mod-smart |
5.12.0-53 |
smart input plugin |
|
collectd-mod-snmp |
5.12.0-53 |
SNMP input plugin |
|
collectd-mod-swap |
5.12.0-53 |
swap input plugin |
|
collectd-mod-syslog |
5.12.0-53 |
syslog output plugin |
|
collectd-mod-table |
5.12.0-53 |
table-like structured file input plugin |
|
collectd-mod-tail |
5.12.0-53 |
tail input plugin |
|
collectd-mod-tail-csv |
5.12.0-53 |
tail CSV input plugin |
|
collectd-mod-tcpconns |
5.12.0-53 |
TCP connection tracking input plugin |
|
collectd-mod-teamspeak2 |
5.12.0-53 |
TeamSpeak2 input plugin |
|
collectd-mod-ted |
5.12.0-53 |
The Energy Detective input plugin |
|
collectd-mod-thermal |
5.12.0-53 |
system temperatures input plugin |
|
collectd-mod-threshold |
5.12.0-53 |
Notifications and thresholds plugin |
|
collectd-mod-ubi |
5.12.0-53 |
Unsorted block images plugin |
|
collectd-mod-unixsock |
5.12.0-53 |
unix socket output plugin |
|
collectd-mod-uptime |
5.12.0-53 |
uptime status input plugin |
|
collectd-mod-users |
5.12.0-53 |
user logged in status input plugin |
|
collectd-mod-vmem |
5.12.0-53 |
virtual memory usage input plugin |
|
collectd-mod-wireless |
5.12.0-53 |
wireless status input plugin |
|
collectd-mod-write-graphite |
5.12.0-53 |
Carbon/Graphite output plugin |
|
collectd-mod-write-http |
5.12.0-53 |
HTTP POST output plugin |
|
collectd-mod-write-log |
5.12.0-53 |
Log output plugin |
|
colrm |
2.40.1-1 |
colrm removes selected columns from a file. Input is taken from standard input. Output is sent to standard output. |
|
column |
2.40.1-1 |
The column utility formats its input into multiple columns |
|
comgt |
0.32-35 |
comgt is a scripting language interpreter useful for establishing communications on serial lines and through PCMCIA modems as well as GPRS and 3G datacards. |
|
comgt-directip |
0.32-35 |
Sierra Wireless Direct-IP support |
|
comgt-ncm |
0.32-35 |
NCM 3G/4G Support |
|
confuse |
3.3-2 |
libConfuse is a configuration file parser library, licensed under the terms of the ISC license, and written in C. It supports sections and (lists of) values (strings, integers, floats, booleans or other sections), as well as some other features (such as single/double-quoted strings, environment variable expansion, functions and nested include statements). It makes it very easy to add configuration file capability to a program using a simple API. The goal of libConfuse is not to be the configuration file parser library with a gazillion of features. Instead, it aims to be easy to use and quick to integrate with your code. libConfuse was called libcfg before, but was changed to not confuse with other similar libraries. |
|
conntrack |
1.4.8-1 |
Conntrack is a userspace command line program targeted at system administrators. It enables them to view and manage the in-kernel connection tracking state table. |
|
conntrackd |
1.4.8-1 |
Conntrackd can replicate the status of the connections that are currently being processed by your stateful firewall based on Linux. Conntrackd can also run as statistics daemon. |
|
coreutils |
9.3-1 |
Full versions of standard GNU utilities. If an equivalent Busybox applet is available, you should consider compiling that instead as Busybox applets are usually smaller, at the expense of reduced functionality. |
|
coreutils-b2sum |
9.3-1 |
Full version of standard GNU b2sum utility. |
|
coreutils-base32 |
9.3-1 |
Full version of standard GNU base32 utility. |
|
coreutils-base64 |
9.3-1 |
Full version of standard GNU base64 utility. |
|
coreutils-basename |
9.3-1 |
Full version of standard GNU basename utility. |
|
coreutils-basenc |
9.3-1 |
Full version of standard GNU basenc utility. |
|
coreutils-cat |
9.3-1 |
Full version of standard GNU cat utility. |
|
coreutils-chcon |
9.3-1 |
Full version of standard GNU chcon utility. |
|
coreutils-chgrp |
9.3-1 |
Full version of standard GNU chgrp utility. |
|
coreutils-chmod |
9.3-1 |
Full version of standard GNU chmod utility. |
|
coreutils-chown |
9.3-1 |
Full version of standard GNU chown utility. |
|
coreutils-chroot |
9.3-1 |
Full version of standard GNU chroot utility. |
|
coreutils-cksum |
9.3-1 |
Full version of standard GNU cksum utility. |
|
coreutils-comm |
9.3-1 |
Full version of standard GNU comm utility. |
|
coreutils-cp |
9.3-1 |
Full version of standard GNU cp utility. |
|
coreutils-csplit |
9.3-1 |
Full version of standard GNU csplit utility. |
|
coreutils-cut |
9.3-1 |
Full version of standard GNU cut utility. |
|
coreutils-date |
9.3-1 |
Full version of standard GNU date utility. |
|
coreutils-dd |
9.3-1 |
Full version of standard GNU dd utility. |
|
coreutils-df |
9.3-1 |
Full version of standard GNU df utility. |
|
coreutils-dir |
9.3-1 |
Full version of standard GNU dir utility. |
|
coreutils-dircolors |
9.3-1 |
Full version of standard GNU dircolors utility. |
|
coreutils-dirname |
9.3-1 |
Full version of standard GNU dirname utility. |
|
coreutils-du |
9.3-1 |
Full version of standard GNU du utility. |
|
coreutils-echo |
9.3-1 |
Full version of standard GNU echo utility. |
|
coreutils-env |
9.3-1 |
Full version of standard GNU env utility. |
|
coreutils-expand |
9.3-1 |
Full version of standard GNU expand utility. |
|
coreutils-expr |
9.3-1 |
Full version of standard GNU expr utility. |
|
coreutils-factor |
9.3-1 |
Full version of standard GNU factor utility. |
|
coreutils-false |
9.3-1 |
Full version of standard GNU false utility. |
|
coreutils-fmt |
9.3-1 |
Full version of standard GNU fmt utility. |
|
coreutils-fold |
9.3-1 |
Full version of standard GNU fold utility. |
|
coreutils-groups |
9.3-1 |
Full version of standard GNU groups utility. |
|
coreutils-head |
9.3-1 |
Full version of standard GNU head utility. |
|
coreutils-hostid |
9.3-1 |
Full version of standard GNU hostid utility. |
|
coreutils-id |
9.3-1 |
Full version of standard GNU id utility. |
|
coreutils-install |
9.3-1 |
Full version of standard GNU install utility. |
|
coreutils-join |
9.3-1 |
Full version of standard GNU join utility. |
|
coreutils-kill |
9.3-1 |
Full version of standard GNU kill utility. |
|
coreutils-link |
9.3-1 |
Full version of standard GNU link utility. |
|
coreutils-ln |
9.3-1 |
Full version of standard GNU ln utility. |
|
coreutils-logname |
9.3-1 |
Full version of standard GNU logname utility. |
|
coreutils-ls |
9.3-1 |
Full version of standard GNU ls utility. |
|
coreutils-md5sum |
9.3-1 |
Full version of standard GNU md5sum utility. |
|
coreutils-mkdir |
9.3-1 |
Full version of standard GNU mkdir utility. |
|
coreutils-mkfifo |
9.3-1 |
Full version of standard GNU mkfifo utility. |
|
coreutils-mknod |
9.3-1 |
Full version of standard GNU mknod utility. |
|
coreutils-mktemp |
9.3-1 |
Full version of standard GNU mktemp utility. |
|
coreutils-mv |
9.3-1 |
Full version of standard GNU mv utility. |
|
coreutils-nice |
9.3-1 |
Full version of standard GNU nice utility. |
|
coreutils-nl |
9.3-1 |
Full version of standard GNU nl utility. |
|
coreutils-nohup |
9.3-1 |
Full version of standard GNU nohup utility. |
|
coreutils-nproc |
9.3-1 |
Full version of standard GNU nproc utility. |
|
coreutils-numfmt |
9.3-1 |
Full version of standard GNU numfmt utility. |
|
coreutils-od |
9.3-1 |
Full version of standard GNU od utility. |
|
coreutils-paste |
9.3-1 |
Full version of standard GNU paste utility. |
|
coreutils-pathchk |
9.3-1 |
Full version of standard GNU pathchk utility. |
|
coreutils-pinky |
9.3-1 |
Full version of standard GNU pinky utility. |
|
coreutils-pr |
9.3-1 |
Full version of standard GNU pr utility. |
|
coreutils-printenv |
9.3-1 |
Full version of standard GNU printenv utility. |
|
coreutils-printf |
9.3-1 |
Full version of standard GNU printf utility. |
|
coreutils-ptx |
9.3-1 |
Full version of standard GNU ptx utility. |
|
coreutils-pwd |
9.3-1 |
Full version of standard GNU pwd utility. |
|
coreutils-readlink |
9.3-1 |
Full version of standard GNU readlink utility. |
|
coreutils-realpath |
9.3-1 |
Full version of standard GNU realpath utility. |
|
coreutils-rm |
9.3-1 |
Full version of standard GNU rm utility. |
|
coreutils-rmdir |
9.3-1 |
Full version of standard GNU rmdir utility. |
|
coreutils-runcon |
9.3-1 |
Full version of standard GNU runcon utility. |
|
coreutils-seq |
9.3-1 |
Full version of standard GNU seq utility. |
|
coreutils-sha1sum |
9.3-1 |
Full version of standard GNU sha1sum utility. |
|
coreutils-sha224sum |
9.3-1 |
Full version of standard GNU sha224sum utility. |
|
coreutils-sha256sum |
9.3-1 |
Full version of standard GNU sha256sum utility. |
|
coreutils-sha384sum |
9.3-1 |
Full version of standard GNU sha384sum utility. |
|
coreutils-sha512sum |
9.3-1 |
Full version of standard GNU sha512sum utility. |
|
coreutils-shred |
9.3-1 |
Full version of standard GNU shred utility. |
|
coreutils-shuf |
9.3-1 |
Full version of standard GNU shuf utility. |
|
coreutils-sleep |
9.3-1 |
Full version of standard GNU sleep utility. |
|
coreutils-sort |
9.3-1 |
Full version of standard GNU sort utility. |
|
coreutils-split |
9.3-1 |
Full version of standard GNU split utility. |
|
coreutils-stat |
9.3-1 |
Full version of standard GNU stat utility. |
|
coreutils-stdbuf |
9.3-1 |
Full version of standard GNU stdbuf utility. |
|
coreutils-stty |
9.3-1 |
Full version of standard GNU stty utility. |
|
coreutils-sum |
9.3-1 |
Full version of standard GNU sum utility. |
|
coreutils-sync |
9.3-1 |
Full version of standard GNU sync utility. |
|
coreutils-tac |
9.3-1 |
Full version of standard GNU tac utility. |
|
coreutils-tail |
9.3-1 |
Full version of standard GNU tail utility. |
|
coreutils-tee |
9.3-1 |
Full version of standard GNU tee utility. |
|
coreutils-test |
9.3-1 |
Full version of standard GNU test utility. |
|
coreutils-timeout |
9.3-1 |
Full version of standard GNU timeout utility. |
|
coreutils-touch |
9.3-1 |
Full version of standard GNU touch utility. |
|
coreutils-tr |
9.3-1 |
Full version of standard GNU tr utility. |
|
coreutils-true |
9.3-1 |
Full version of standard GNU true utility. |
|
coreutils-truncate |
9.3-1 |
Full version of standard GNU truncate utility. |
|
coreutils-tsort |
9.3-1 |
Full version of standard GNU tsort utility. |
|
coreutils-tty |
9.3-1 |
Full version of standard GNU tty utility. |
|
coreutils-uname |
9.3-1 |
Full version of standard GNU uname utility. |
|
coreutils-unexpand |
9.3-1 |
Full version of standard GNU unexpand utility. |
|
coreutils-uniq |
9.3-1 |
Full version of standard GNU uniq utility. |
|
coreutils-unlink |
9.3-1 |
Full version of standard GNU unlink utility. |
|
coreutils-uptime |
9.3-1 |
Full version of standard GNU uptime utility. |
|
coreutils-users |
9.3-1 |
Full version of standard GNU users utility. |
|
coreutils-vdir |
9.3-1 |
Full version of standard GNU vdir utility. |
|
coreutils-wc |
9.3-1 |
Full version of standard GNU wc utility. |
|
coreutils-who |
9.3-1 |
Full version of standard GNU who utility. |
|
coreutils-whoami |
9.3-1 |
Full version of standard GNU whoami utility. |
|
coreutils-yes |
9.3-1 |
Full version of standard GNU yes utility. |
|
cpio |
2.15-1 |
GNU cpio copies files between archives and directories. It supports the following archive formats: old binary cpio, old portable cpio, SVR4 cpio with and without checksum, HP cpio, and various tar formats. |
|
crawl |
0.31.0-1 |
Dungeon Crawl Stone Soup is an open-source, single-player, role-playing roguelike game of exploration and treasure-hunting in dungeons filled with dangerous and unfriendly monsters in a quest to rescue the mystifyingly fabulous Orb of Zot. |
|
crelay |
0.14.1-1 |
crelay is used to control different relay cards in a unified manner. It provides several interfaces for controlling the relays locally or remotely by a web browser or a smartphone. The card which is detected first will be used. A WebUI control is available on port 8000 (default) . Currently supported relay cards: - Conrad USB 4-channel relay card - Sainsmart USB 4/8-channel relay board - Sainsmart USB 16-channel relay control module - Generic GPIO relays - HID API compatible relay card |
|
cron |
4.1-7 |
Standart Vixie cron, with cron.d addition. |
|
cryfs |
0.10.4-6 |
CryFS encrypts your files, so you can safely store them anywhere. It works well together with cloud services like Dropbox, iCloud, OneDrive and others. |
|
cryptsetup |
2.7.1-1 |
Cryptsetup is utility used to conveniently setup disk encryption based on DMCrypt kernel module. |
|
cryptsetup-ssh |
2.7.1-1 |
Experimental SSH token support for cryptsetup. |
|
csflow |
3.4.5-1 |
The high-scalability sFlow/NetFlow/IPFIX collector used internally at Cloudflare. (sFlow v5) |
|
ctags |
6.1.0-1 |
Universal Ctags generates an index (or tag) file of language objects found in source files for many popular programming languages. This index makes it easy for text editors and other tools to locate the indexed items. Universal Ctags improves on traditional ctags because of its multilanguage support, its ability for the user to define new languages searched by regular expressions, and its ability to generate emacs-style TAGS files. |
|
ctorrent-nossl |
dnh3.3.2-8 |
CTorrent is a BitTorrent client written in the C programming language, known to be a very robust and mature programming language, which produces fast and optimized application. This package is built with builtin (Steve Reid's public-domain) SHA-1 support |
|
cuetools |
1.4.1-1 |
cuetools is a set of utilities for working with Cue Sheet (cue) and Table of Contents (toc) files. |
|
cups |
2.2.12-2a |
Common UNIX Printing System |
|
cups-filters |
1.28.17-2 |
CUPS filters maintained by OpenPrinting. The CUPS Filters package contains backends, filters and other software that was once part of the core CUPS distribution but is no longer maintained by Apple Inc. |
|
cups-pdf |
3.0.1-2 |
This software is designed to produce PDF files in a heterogeneous network by providing a PDF printer on the central fileserver. |
|
curl |
8.8.0-2 |
A client-side URL transfer utility |
|
curlftpfs |
0.9.2-3 |
CurlFtpFS is a filesystem for accessing FTP hosts based on FUSE and libcurl. |
|
cutter |
1.04-2 |
Cutter is an open source program that allows Linux firewall administrators to abort TCP/IP connections routed over the firewall or router on which it is run. |
|
cvs |
1.11.23-3 |
CVS is a version control system, an important component of Source Configuration Management (SCM). Using it, you can record the history of sources files, and documents. It fills a similar role to the free software RCS, PRCS, and Aegis packages. |
|
daemonize |
1.7.8-2 |
daemonize is a command-line utility that runs a command as a Unix daemon. |
|
daemontools-encore |
1.11-1 |
A collection of tools for managing UNIX services. |
|
dansguardian |
2.12.0.3-1 |
DansGuardian |
|
darkstat |
3.0.719-6 |
darkstat is a packet sniffer that runs as a background process on a cable/DSL router, gathers all sorts of statistics about network usage, and serves them over HTTP. |
|
davfs2 |
1.6.1-2 |
Web Distributed Authoring and Versioning (WebDAV), an extension to the HTTP-protocol, allows authoring of resources on a remote web server.davfs2 provides the ability to access such resources like a typical filesystem, allowing for use by standard applications with no built-in support for WebDAV. davfs2 is designed to fully integrate into the filesystem semantics of Unix-like systems (mount, umount, etc.). davfs2 makes mounting by unprivileged users as easy and secure as possible. davfs2 does extensive caching to make the file system responsive, to avoid unnecessary network traffic and to prevent data loss, and to cope for slow or unreliable connections. davfs2 will work with most WebDAV servers needing little or no configuration. |
|
daytimeserv |
|
.0-1 |
|
dbus |
1.14.10-1 |
Simple interprocess messaging system (daemon) |
|
dbus-utils |
1.14.10-1 |
Simple interprocess messaging system (utilities) |
|
dc |
1.06.95-1 |
dc is a reverse-polish desk calculator which supports unlimited precision arithmetic. |
|
debootstrap |
1.0.128+nmu2+deb12u1-1 |
debootstrap is used to create a Debian base system from scratch, without requiring the availability of dpkg or apt. It does this by downloading .deb files from a mirror site, and carefully unpacking them into a directory which can eventually be chrooted into. |
|
debugfs |
1.47.0-2 |
Ext2 Filesystem debugger |
|
dejavu-fonts-ttf-DejaVuMathTeXGyre |
2.37-1 |
DejaVuMathTeXGyre |
|
dejavu-fonts-ttf-DejaVuSans |
2.37-1 |
DejaVuSans |
|
dejavu-fonts-ttf-DejaVuSans-Bold |
2.37-1 |
DejaVuSans-Bold |
|
dejavu-fonts-ttf-DejaVuSans-BoldOblique |
2.37-1 |
DejaVuSans-BoldOblique |
|
dejavu-fonts-ttf-DejaVuSans-ExtraLight |
2.37-1 |
DejaVuSans-ExtraLight |
|
dejavu-fonts-ttf-DejaVuSans-Oblique |
2.37-1 |
DejaVuSans-Oblique |
|
dejavu-fonts-ttf-DejaVuSansCondensed |
2.37-1 |
DejaVuSansCondensed |
|
dejavu-fonts-ttf-DejaVuSansCondensed-Bold |
2.37-1 |
DejaVuSansCondensed-Bold |
|
dejavu-fonts-ttf-DejaVuSansCondensed-BoldOblique |
2.37-1 |
DejaVuSansCondensed-BoldOblique |
|
dejavu-fonts-ttf-DejaVuSansCondensed-Oblique |
2.37-1 |
DejaVuSansCondensed-Oblique |
|
dejavu-fonts-ttf-DejaVuSansMono |
2.37-1 |
DejaVuSansMono |
|
dejavu-fonts-ttf-DejaVuSansMono-Bold |
2.37-1 |
DejaVuSansMono-Bold |
|
dejavu-fonts-ttf-DejaVuSansMono-BoldOblique |
2.37-1 |
DejaVuSansMono-BoldOblique |
|
dejavu-fonts-ttf-DejaVuSansMono-Oblique |
2.37-1 |
DejaVuSansMono-Oblique |
|
dejavu-fonts-ttf-DejaVuSerif |
2.37-1 |
DejaVuSerif |
|
dejavu-fonts-ttf-DejaVuSerif-Bold |
2.37-1 |
DejaVuSerif-Bold |
|
dejavu-fonts-ttf-DejaVuSerif-BoldItalic |
2.37-1 |
DejaVuSerif-BoldItalic |
|
dejavu-fonts-ttf-DejaVuSerif-Italic |
2.37-1 |
DejaVuSerif-Italic |
|
dejavu-fonts-ttf-DejaVuSerifCondensed |
2.37-1 |
DejaVuSerifCondensed |
|
dejavu-fonts-ttf-DejaVuSerifCondensed-Bold |
2.37-1 |
DejaVuSerifCondensed-Bold |
|
dejavu-fonts-ttf-DejaVuSerifCondensed-BoldItalic |
2.37-1 |
DejaVuSerifCondensed-BoldItalic |
|
dejavu-fonts-ttf-DejaVuSerifCondensed-Italic |
2.37-1 |
DejaVuSerifCondensed-Italic |
|
deluge |
2.1.1-1 |
BitTorrent client with a client/server model. |
|
deluge-ui-web |
2.1.1-1 |
a lightweight BitTorrent client (Web UI) |
|
dfc |
3.1.1-1 |
dfc displays file system space usage using graphs and colors. In some ways, it is a modernized version of df as it is able to use colors, draw graphs and export its output to different formats such as CSV or HTML. |
|
dialog |
1.3-20240619-1 |
A script-interpreter which provides a set of curses widgets. |
|
diffutils |
3.10-1 |
The Diffutils package contains programs that show the differences between files or directories. |
|
digitemp |
3.7.2-2 |
DigiTemp is a simple to use program for reading values from 1-wire devices. Its main use is for reading temperature sensors, but it also reads counters, and understands the 1-wire hubs with devices on different branches of the network. This package is built without USB support. |
|
digitemp-usb |
3.7.2-2 |
DigiTemp is a simple to use program for reading values from 1-wire devices. Its main use is for reading temperature sensors, but it also reads counters, and understands the 1-wire hubs with devices on different branches of the network. This package is built with USB support. |
|
dislocker |
0.7.3-2 |
This software has been designed to read BitLocker encrypted partitions under a Linux system. |
|
dmesg |
2.40.1-1 |
dmesg is used to examine or control the kernel ring buffer |
|
dnscrypt-proxy |
2019.08.20~07ac3825-3a |
dnscrypt-proxy provides local service which can be used directly as your local resolver or as a DNS forwarder, encrypting and authenticating requests using the DNSCrypt protocol and passing them to an upstream server. The DNSCrypt protocol uses high-speed high-security elliptic-curve cryptography and is very similar to DNSCurve, but focuses on securing communications between a client and its first-level resolver. |
|
dnscrypt-proxy-resolvers |
2019.08.20~07ac3825-3a |
Package with current list of dnscrypt-proxy resolvers. |
|
dnscrypt-proxy2 |
2.1.5-1 |
A flexible DNS proxy, with support for modern encrypted DNS protocols such as DNSCrypt v2 and DNS-over-HTTP/2. DNSCrypt is a network protocol designed by Frank Denis and Yecheng Fu, which authenticates Domain Name System (DNS) traffic between the user's computer and recursive name servers. |
|
dnsmasq-full |
2.90-2 |
It is intended to provide coupled DNS and DHCP service to a LAN. This is a fully configurable variant with DHCPv4, DHCPv6, DNSSEC, Authoritative DNS and nftset, Conntrack support & NO_ID enabled by default. |
|
dos2unix |
7.5.2-1 |
Convert text files with DOS or Mac line breaks to Unix line breaks and vice versa. This package contains the dos2unix. |
|
dosfstools |
4.2-4 |
The dosfstools package includes the mkfs.fat and fsck.fat utilities, which respectively make and check MS-DOS FAT filesystems. |
|
dovecot |
2.3.21-1 |
Dovecot is a program which provides POP3 and IMAP services. |
|
dovecot-utils |
2.3.21-1 |
doveadm and dsync utilities for Dovecot |
|
drill |
1.8.3-1 |
ldns includes the drill tool, which is much like dig from BIND. It was designed with DNSSEC in mind and should be a useful debugging/query tool for DNSSEC. |
|
dropbear |
2024.85-1 |
A small SSH2 server/client designed for small memory environments. |
|
dropbearconvert |
2024.85-1 |
Utility for converting SSH keys |
|
dstat |
0.7.4-2 |
Dstat is a versatile replacement for vmstat, iostat, netstat and ifstat. Dstat overcomes some of their limitations and adds some extra features, more counters and flexibility. Dstat is handy for monitoring systems during performance tuning tests, benchmarks or troubleshooting. |
|
dtach |
0.9-1 |
dtach is a tiny program that emulates the detach feature of screen, allowing you to run a program in an environment that is protected from the controlling terminal and attach to it later. dtach does not keep track of the contents of the screen, and thus works best with programs that know how to redraw themselves. |
|
duktape |
2.7.0-1 |
Duktape is an embeddable Javascript engine, with a focus on portability and compact footprint. |
|
dump1090 |
9.0-3 |
Dump1090 is a Mode S decoder specifically designed for RTLSDR devices. |
|
dumpe2fs |
1.47.0-2 |
Ext2 Filesystem information dumping utility |
|
dvb-apps |
r3d43b280298c-2 |
Linux DVB API applications and utilities. . This meta-package contains only dependencies to all Linux DVB API applications, libraries and data. |
|
dvb-center |
0.2-4 |
It's a metapackage to install config and scripts files on Keenetic routers with NDMS v2+. |
|
dvb-firmware |
1.0-6 |
dvb-firmware is specialised software that is both specific to some hardware and also integral for its proper functioning. |
|
dysk |
2.9.0-1 |
A linux utility to get information on filesystems, like df but better. |
|
e2freefrag |
1.47.0-2 |
Ext2 Filesystem free space fragmentation information utility |
|
e2fsprogs |
1.47.0-2 |
This package contains essential ext2 filesystem utilities which consists of e2fsck, mke2fs and most of the other core ext2 filesystem utilities. |
|
e4crypt |
1.47.0-2 |
Ext4 Filesystem encryption utility |
|
ebtables-legacy |
2018.06.27~48cff25d-2 |
The ebtables program is a filtering tool for a bridging firewall. The filtering is focussed on the Link Layer Ethernet frame fields. Apart from filtering, it also gives the ability to alter the Ethernet MAC addresses and implement a brouter. |
|
ebtables-legacy-utils |
2018.06.27~48cff25d-2 |
The ebtables program is a filtering tool for a bridging firewall. The filtering is focussed on the Link Layer Ethernet frame fields. Apart from filtering, it also gives the ability to alter the Ethernet MAC addresses and implement a brouter. |
|
eggdrop |
1.9.5-1 |
EggDrop IRC BOT. |
|
elinks |
0.16.1.1-1 |
An advanced text based web browser. |
|
emailrelay |
2.4.1-1 |
Emailrelay is a simple SMTP proxy and store-and-forward message transfer agent (MTA). When running as a proxy all e-mail messages can be passed through a user-defined program, such as a spam filter, which can drop, re-address or edit messages as they pass through. When running as a store-and-forward MTA incoming messages are stored in a local spool directory, and then forwarded to the next SMTP server on request. |
|
empty |
0.6.23c-1 |
empty is an utility that provides an interface to execute and/or interact with processes under pseudo-terminal sessions (PTYs). This tool is definitely useful in programming of shell scripts designed to communicate with interactive programs like telnet, ssh, ftp, etc. In some cases, empty can be the simplest replacement for TCL/expect or other similar programming tools. |
|
encfs |
1.9.5-1 |
EncFS provides an encrypted filesystem in user-space. It runs without any special permissions and uses the FUSE library module to provide the filesystem interface. |
|
entr |
5.6-1 |
A utility for running arbitrary commands when files change. |
|
entware-opt |
227000-3 |
entware-opt is a metapackage to install Entware basic libraries and scripts. |
|
entware-release |
2024.07-1 |
entware_release is a file in /opt/etc with entware info. |
|
entware-upgrade |
1.0-1 |
Helper package to upgrade Entware for future usage. Currently used to upgrade armv7soft (2.3.36) to the new codebase. |
|
erlang |
27.0-2 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This package contains the runtime implementation and a minimal set of modules (erts, kernel, sasl & stdlib). |
|
erlang-asn1 |
5.3 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides Abstract Syntax Notation One (ASN.1) support. |
|
erlang-compiler |
8.5 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides a byte code compiler for Erlang which produces highly compact code. |
|
erlang-crypto |
5.5 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides functions for computation of message digests, and encryption and decryption functions. |
|
erlang-erl-interface |
5.5.2 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides support for erlang interoperability with other languages. |
|
erlang-inets |
9.2 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides a container for Internet clients and servers. Currently a FTP client, a HTTP client and server, and a tftp client and server have been incorporated in Inets. |
|
erlang-mnesia |
4.23.2 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides a distributed DataBase Management System (DBMS), appropriate for telecommunications applications and other Erlang applications which require continuous operation and exhibit soft real-time properties. |
|
erlang-os_mon |
2.10 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides the following services: cpu_sup CPU load and utilization supervision disksup Disk supervision memsup Memory supervision |
|
erlang-public-key |
1.16 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides functions to handle public-key infrastructure. |
|
erlang-reltool |
1.0.1 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides support for release management. |
|
erlang-runtime-tools |
2.1 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides low footprint tracing/debugging tools suitable for inclusion in a production system. |
|
erlang-snmp |
5.16 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides Simple Network Management Protocol (SNMP) support including a MIB compiler and tools for creating SNMP agents. |
|
erlang-ssh |
5.2 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides an implementation of the Secure Shell protocol, with SSH & SFTP support. |
|
erlang-ssl |
11.2 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides support for secure communication over sockets. |
|
erlang-syntax-tools |
3.2 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides support for handling abstract Erlang syntax trees. |
|
erlang-tools |
4.0 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides support for misc tools. |
|
erlang-xmerl |
2.0 |
Erlang/OTP is a general-purpose programming language and runtime environment. Erlang has built-in support for concurrency, distribution and fault tolerance. . This Erlang/OTP package provides functions for exporting XML data to an external format |
|
esniper |
2.35.0-1 |
Simple, lightweight tool for sniping eBay auctions |
|
espeak-ng |
1.50-2 |
eSpeak NG is an open source speech synthesizer that supports more than hundred languages and accents. |
|
etherwake |
1.09-5 |
You can wake up WOL compliant Computers which have been powered down to sleep mode or start WOL compliant Computers with a BIOS feature. WOL is an abbreviation for Wake-on-LAN. It is a standard that allows you to turn on a computer from another location over a network connection. ether-wake also supports WOL passwords. |
|
ethtool |
6.6-1 |
ethtool is a small utility for examining and tuning your ethernet-based network interface |
|
ethtool-full |
6.6-1 |
ethtool is a small utility for examining and tuning your ethernet-based network interface |
|
exfat-fsck |
1.2.2-1 |
Utility for checking/repairing an exFAT File System |
|
exfat-fuse |
1.4.0-1 |
This project aims to provide a full-featured exFAT file system implementation for Unix-like systems. It consists of a FUSE module (fuse-exfat) and a set of utilities (exfat-utils). |
|
exfat-mkfs |
1.2.2-1 |
Utility for creating an exFAT File System |
|
exiv2 |
0.28.3-1 |
library and a command-line utility to read, write, delete and modify Exif, IPTC, XMP and ICC image metadata. |
|
expect |
5.45.4-1 |
Expect is a tool for automating interactive applications such as telnet, ftp, etc. Expect can make easy all sorts of tasks that are prohibitively difficult with anything else. |
|
ext-ui |
0.6-1 |
PHP (v8.x) version extended web user interface (ext-UI) for Keenetic routers. |
|
ext-ui-nginx |
|
-6 |
|
ext4magic |
0.3.2-1 |
Linux admin tool, can help to recover deleted or overwritten files on ext3 and ext4 filesystems. |
|
extundelete |
0.2.4-1 |
Extundelete is a utility to undelete files from an ext3 or ext4 partition. |
|
eza |
0.18.21-1 |
eza is a modern, maintained replacement for ls, built on exa. |
|
f2fs-tools |
1.16.0-3 |
Tools for Flash-Friendly File System (F2FS) |
|
f2fsck |
1.16.0-3 |
Utility for checking/repairing a Flash-Friendly File System (F2FS) |
|
faad2 |
2.11.1-2 |
FAAD2 is the fastest ISO AAC audio decoder available. FAAD2 correctly decodes all MPEG-4 and MPEG-2 MAIN, LOW, LTP, LD and ER object type AAC files. This package contains a binary to play AAC or MP4 files. |
|
fail2ban |
0.11.2-9 |
Fail2Ban scans log files like /var/log/auth.log and bans IP addresses conducting too many failed login attempts. |
|
fake-hwclock |
0.13-1 |
Trivial script to load/save current contents of the kernel clock from/to a file. Helpful as a *bootstrap* clock on machines where there isn't a useful RTC driver (e.g. on development boards). Using NTP is still recommended on these machines to get to real time sync once more of the system is up and running. |
|
fakeidentd |
2.6-2 |
A static secure identd, only one source file. |
|
fallocate |
2.40.1-1 |
fallocate is used to manipulate the allocated disk space for a file |
|
fastd |
22-3 |
Fast and secure tunneling daemon, which is optimized on small code size and few dependencies |
|
fatrace |
0.17.0-1 |
Its main purpose is to find processes which keep waking up the disk unnecessarily and thus prevent some power saving. |
|
fcgi |
|
.2-1 |
|
fcgiwrap |
|
.0-3 |
|
fdisk |
2.40.1-1 |
a menu-driven program for creation and manipulation of partition tables |
|
fdk-aac |
2.0.1-5 |
Port of the Fraunhofer FDK AAC Codec Library for Android |
|
fdm |
2.2-1 |
fdm is a simple, lightweight replacement for mail fetch, filter and delivery programs such as fetchmail and procmail. It can fetch using POP3 or IMAP (with SSL) or from stdin, and deliver to a pipe, file, maildir, mbox or SMTP server, based on PCRE |
|
fetchmail |
6.4.38-1 |
Retrieves remote mail via POP/IMAP. Very useful in conjunction with mutt. This package is built with SSL support. |
|
fetchmail-nossl |
6.4.38-1 |
Retrieves remote mail via POP/IMAP. Very useful in conjunction with mutt. This package is built without SSL support. |
|
ffmpeg |
5.1.4-2 |
FFmpeg is a a software package that can record, convert and stream digital audio and video in numerous formats. FFmpeg licensing / patent issues are complex. It is the reponsibility of the user to understand any requirements in this regard with its usage. See: https://ffmpeg.org/legal.html for further information. . This package contains the FFmpeg command line tool. |
|
ffprobe |
5.1.4-2 |
FFmpeg is a a software package that can record, convert and stream digital audio and video in numerous formats. FFmpeg licensing / patent issues are complex. It is the reponsibility of the user to understand any requirements in this regard with its usage. See: https://ffmpeg.org/legal.html for further information. . This package contains the FFprobe command line tool. |
|
file |
5.45-1 |
File type determination utility |
|
filefrag |
1.47.0-2 |
Ext2 Filesystem file fragmentation report utility |
|
findfs |
2.40.1-1 |
findfs will search the disks in the system looking for a filesystem which has a label matching label or a UUID equal to uuid |
|
findutils |
4.10.0-1 |
Replace busybox versions of findutils with full GNU versions. This is normally not needed as busybox is smaller and provides sufficient functionality, but some users may want or need the full functionality of the GNU tools. This package installs find and xargs utilities |
|
findutils-locate |
4.10.0-1 |
Replace busybox versions of findutils with full GNU versions. This is normally not needed as busybox is smaller and provides sufficient functionality, but some users may want or need the full functionality of the GNU tools. This package contains the locate and related updatedb utility |
|
fio |
3.37-1 |
Fio is an I/O testing tool that will spawn a number of threads or processes doing a particular type of I/O action as specified by the user. Fio can be driven by a 'job file' describing the I/O load one wants to simulate. |
|
fish |
3.5.0-1 |
Fish is a smart and user-friendly command line shell for OS X, Linux, and the rest of the family. Fish includes features like syntax highlighting, autosuggest-as-you-type, and fancy tab completions that just work, with no configuration required. |
|
fixparts |
1.0.10-1 |
a text-mode menu-driven program for repairing certain types of problems with Master Boot Record (MBR) partition tables |
|
flac |
1.4.3-1 |
flac & metaflac utilities |
|
flex |
2.6.4-4a |
flex is a tool for generating scanners: programs which recognize lexical patterns in text |
|
flite |
2.2-1 |
Festival Lite is a stripped down version of Festival, the well-developed text-to-speech program written in C++. This program is written in C to keep memory usage low. |
|
flock |
2.40.1-1 |
manages flock locks from within shell scripts or the command line |
|
fontconfig |
2.15.0-1 |
fontconfig |
|
fossil |
2.24-1 |
Fossil is a self-contained, high-reliability, distributed software configuration management system, including Bug Tracking, Wiki, Forum, and Technotes. |
|
fping |
5.2-1 |
fping is a ping like program which uses the Internet Control Message Protocol (ICMP) echo request to determine if a target host is responding. fping differs from ping in that you can specify any number of targets on the command line, or specify a file containing the lists of targets to ping. Instead of sending to one target until it times out or replies, fping will send out a ping packet and move on to the next target in a round-robin fashion. |
|
fprobe |
1.1-1 |
NetFlow probe (libpcap-based) |
|
freediameter |
1.5.0-1 |
freeDiameter provides an extensible platform for deploying a Diameter network for your Authentication, Authorization and Accounting needs, whether you are involved in research or a network operator. |
|
freeradius3 |
3.2.4-2 |
A flexible RADIUS server (version 3) |
|
freeradius3-common |
3.2.4-2 |
common files |
|
freeradius3-default |
3.2.4-2 |
This meta-package contains only dependencies for modules needed in FreeRADIUS default configuration. |
|
freeradius3-democerts |
3.2.4-2 |
Demo certificates to test the server |
|
freeradius3-mod-always |
3.2.4-2 |
Always module |
|
freeradius3-mod-attr-filter |
3.2.4-2 |
ATTR filter module |
|
freeradius3-mod-cache |
3.2.4-2 |
DATASTORE CACHE |
|
freeradius3-mod-cache-rbtree |
3.2.4-2 |
DATASTORE CACHE RBTREE |
|
freeradius3-mod-cache-redis |
3.2.4-2 |
DATASTORE CACHE REDIS |
|
freeradius3-mod-chap |
3.2.4-2 |
CHAP module |
|
freeradius3-mod-counter |
3.2.4-2 |
Module counter |
|
freeradius3-mod-date |
3.2.4-2 |
Module date |
|
freeradius3-mod-detail |
3.2.4-2 |
Detailed accounting module |
|
freeradius3-mod-digest |
3.2.4-2 |
HTTP Digest Authentication |
|
freeradius3-mod-dpsk |
3.2.4-2 |
MODULE DPSK |
|
freeradius3-mod-dynamic-clients |
3.2.4-2 |
Dynamic Clients Authentication |
|
freeradius3-mod-eap |
3.2.4-2 |
Base EAP module |
|
freeradius3-mod-eap-fast |
3.2.4-2 |
EAP/FAST module |
|
freeradius3-mod-eap-gtc |
3.2.4-2 |
EAP/GTC module |
|
freeradius3-mod-eap-md5 |
3.2.4-2 |
EAP/MD5 module |
|
freeradius3-mod-eap-mschapv2 |
3.2.4-2 |
EAP/MS-CHAPv2 module |
|
freeradius3-mod-eap-peap |
3.2.4-2 |
EAP/PEAP module |
|
freeradius3-mod-eap-pwd |
3.2.4-2 |
EAP/PWD module |
|
freeradius3-mod-eap-sim |
3.2.4-2 |
EAP/SIM module |
|
freeradius3-mod-eap-tls |
3.2.4-2 |
EAP/TLS module |
|
freeradius3-mod-eap-ttls |
3.2.4-2 |
EAP/TTLS module |
|
freeradius3-mod-exec |
3.2.4-2 |
EXEC module |
|
freeradius3-mod-expiration |
3.2.4-2 |
Expiration module |
|
freeradius3-mod-expr |
3.2.4-2 |
EXPR module |
|
freeradius3-mod-files |
3.2.4-2 |
Module using local files for authorization |
|
freeradius3-mod-ippool |
3.2.4-2 |
Radius IP Pool module |
|
freeradius3-mod-json |
3.2.4-2 |
Json module |
|
freeradius3-mod-krb5 |
3.2.4-2 |
Krb5 module |
|
freeradius3-mod-ldap |
3.2.4-2 |
LDAP Authentication |
|
freeradius3-mod-linelog |
3.2.4-2 |
Linelog module |
|
freeradius3-mod-logintime |
3.2.4-2 |
Logintime module |
|
freeradius3-mod-mschap |
3.2.4-2 |
MS-CHAP and MS-CHAPv2 module |
|
freeradius3-mod-pam |
3.2.4-2 |
PAM module |
|
freeradius3-mod-pap |
3.2.4-2 |
PAP module |
|
freeradius3-mod-passwd |
3.2.4-2 |
Rlm passwd module |
|
freeradius3-mod-preprocess |
3.2.4-2 |
Request pre-processing module |
|
freeradius3-mod-python3 |
3.2.4-2 |
Python3 module |
|
freeradius3-mod-radutmp |
3.2.4-2 |
Radius UTMP module |
|
freeradius3-mod-realm |
3.2.4-2 |
Realms handling module |
|
freeradius3-mod-redis |
3.2.4-2 |
Redis module |
|
freeradius3-mod-rediswho |
3.2.4-2 |
Rediswho module |
|
freeradius3-mod-replicate |
3.2.4-2 |
Replicate module |
|
freeradius3-mod-rest |
3.2.4-2 |
Radius REST module |
|
freeradius3-mod-soh |
3.2.4-2 |
SoH module |
|
freeradius3-mod-sometimes |
3.2.4-2 |
Sometimes module |
|
freeradius3-mod-sql |
3.2.4-2 |
Radius generic SQL front-end |
|
freeradius3-mod-sql-map |
3.2.4-2 |
Map module |
|
freeradius3-mod-sql-mysql |
3.2.4-2 |
Radius MySQL back-end drivers |
|
freeradius3-mod-sql-null |
3.2.4-2 |
Radius Dummy SQL back-end drivers |
|
freeradius3-mod-sql-postgresql |
3.2.4-2 |
Radius PostgreSQL back-end drivers |
|
freeradius3-mod-sql-sqlite |
3.2.4-2 |
Radius SQLite back-end drivers |
|
freeradius3-mod-sql-unixodbc |
3.2.4-2 |
Radius unixODBC back-end drivers |
|
freeradius3-mod-sqlcounter |
3.2.4-2 |
Module sqlcounter |
|
freeradius3-mod-sqlippool |
3.2.4-2 |
Radius SQL Based IP Pool module |
|
freeradius3-mod-totp |
3.2.4-2 |
Totp module |
|
freeradius3-mod-unbound |
3.2.4-2 |
Unbound module |
|
freeradius3-mod-unix |
3.2.4-2 |
System Authentication |
|
freeradius3-mod-unpack |
3.2.4-2 |
Unpack module |
|
freeradius3-mod-utf8 |
3.2.4-2 |
UTF8 module |
|
freeradius3-mod-wimax |
3.2.4-2 |
Wimax Authentication |
|
freeradius3-mod-yubikey |
3.2.4-2 |
Yubikey Authentication |
|
freeradius3-utils |
3.2.4-2 |
Misc. client utilities |
|
freshclam |
1.3.0-1 |
Database updater for ClamAV |
|
frp-go |
0.59.0-1 |
frp is a fast reverse proxy that allows you to expose a local server located behind a NAT or firewall to the Internet. It currently supports TCP and UDP, as well as HTTP and HTTPS protocols, enabling requests to be forwarded to internal services via domain name. frp also offers a P2P connect mode. |
|
fsfreeze |
2.40.1-1 |
fsfreeze halts new access to the filesystem and creates a stable image on disk. fsfreeze is intended to be used with hardware RAID devices that support the creation of snapshots. |
|
fstrim |
2.40.1-1 |
fstrim is used on a mounted filesystem to discard (or "trim") blocks which are not in use by the filesystem. This is useful for solid- state drives (SSDs) and thinly-provisioned storage. |
|
fswebcam |
20200725-1 |
fswebcam is a neat and simple webcam app. It captures images from a V4L1/V4L2 compatible device or file, averages them to reduce noise and draws a caption using the GD Graphics Library which also handles compressing the image to PNG or JPEG. The resulting image is saved to a file or sent to stdio where it can be piped to something like ncftpput or scp. |
|
fuse-convmvfs |
0.2.6-1 |
This is a filesystem converting file name from one character set to another. It's implemented by using FUSE. |
|
fuse-utils |
2.9.9-2b |
FUSE (Filesystem in UserSpacE) This package contains the FUSE utilities. - fusermount - ulockmgr_server |
|
fuse3-utils |
3.16.2-1 |
fuse3 (Filesystem in UserSpacE) This package contains the FUSE utilities. - fusermount3 - mount.fuse3 |
|
fwknop |
2.6.11-1 |
Fwknop implements an authorization scheme known as Single Packet Authorization (SPA) for Linux systems running iptables. This mechanism requires only a single encrypted and non-replayed packet to communicate various pieces of information including desired access through an iptables policy. The main application of this program is to use iptables in a default-drop stance to protect services such as SSH with an additional layer of security in order to make the exploitation of vulnerabilities (both 0-day and unpatched code) much more difficult. This package contains the fwknop client. |
|
fwknopd |
2.6.11-1 |
Fwknop implements an authorization scheme known as Single Packet Authorization (SPA) for Linux systems running iptables. This mechanism requires only a single encrypted and non-replayed packet to communicate various pieces of information including desired access through an iptables policy. The main application of this program is to use iptables in a default-drop stance to protect services such as SSH with an additional layer of security in order to make the exploitation of vulnerabilities (both 0-day and unpatched code) much more difficult. This package contains the fwknop daemon. |
|
fxload |
1.0.26-3 |
This program is conveniently able to download firmware into FX, FX2, and FX2LP EZ-USB devices, as well as the original AnchorChips EZ-USB. It is intended to be invoked by hotplug scripts when the unprogrammed device appears on the bus. |
|
fzf |
0.54.0-1 |
fzf is a general-purpose command-line fuzzy finder. |
|
fzy |
1.0-1 |
fzy is a fast, simple fuzzy text selector for the terminal with an advanced scoring algorithm. |
|
gawk |
5.3.0-1 |
GNU awk |
|
gcc |
8.4.0-6 |
gcc |
|
gconv-modules |
2.27-11 |
Glibc gconv modules |
|
gdb |
14.1-1 |
GDB, the GNU Project debugger, allows you to see what is going on `inside' another program while it executes -- or what another program was doing at the moment it crashed. |
|
gdbserver |
14.1-1 |
GDBSERVER is a program that allows you to run GDB on a different machine than the one which is running the program being debugged. |
|
gdisk |
1.0.10-1 |
gdisk is GPT aware disk partitioning tool, with interactive UI. |
|
genl |
4.4.0-10b |
General netlink utility frontend |
|
gerbera |
2.2.0-1 |
Gerbera - UPnP Media Server based on Mediatomb. |
|
getdns |
1.7.3-2 |
This package contains the getdns library (libgetdns). This package also contains the "getdns_query" command line wrapper for getdns exposing the features of this implementation (both in the official API and the additional API functions). |
|
getopt |
2.40.1-1 |
getopt is used to break up (parse) options in command lines for easy parsing by shell procedures, and to check for legal options |
|
ghostscript |
10.01.2-1 |
An interpreter for the PostScript language and for PDF. |
|
giflib |
5.2.2-1 |
giflib is a library for reading and writing gif images. It is API and ABI compatible with libungif which was in wide use while the LZW compression algorithm was patented. |
|
giflib-utils |
5.2.2-1 |
These are the utilities that come with giflib. |
|
git |
2.45.2-2 |
Git is a free & open source, distributed version control system designed to handle everything from small to very large projects with speed and efficiency. |
|
git-gitweb |
2.45.2-2 |
Git is a free & open source, distributed version control system designed to handle everything from small to very large projects with speed and efficiency. This package builds the gitweb web interface for git repositories |
|
git-http |
2.45.2-2 |
Git is a free & open source, distributed version control system designed to handle everything from small to very large projects with speed and efficiency. This package allows git push/fetch over http(s) and ftp(s) |
|
git-lfs |
3.5.1-1 |
Git Large File Storage (LFS) replaces large files such as audio samples, videos, datasets, and graphics with text pointers inside Git, while storing the file contents on a remote server like GitHub.com or GitHub Enterprise. |
|
gkrellmd |
2.3.11-1 |
Gkrellmd listens for connections from gkrellm clients. When a gkrellm client connects to a gkrellmd server all builtin monitors collect their data from the server. |
|
glib2 |
2.80.3-1 |
The GLib library of C routines |
|
gnuchess |
6.2.9-1 |
GNU Chess lets most modern computers play a full game of chess. It has a plain terminal interface but supports visual interfaces such as XBoard. |
|
gnupg |
1.4.23-5 |
GnuPG is GNU's tool for secure communication and data storage. It can be used to encrypt data and to create digital signatures. It includes an advanced key management facility and is compliant with the proposed OpenPGP Internet standard as described in RFC2440. . GnuPG does not use any patented algorithms so it cannot be compatible with PGP2 because it uses IDEA (which is patented worldwide). |
|
gnupg-utils |
1.4.23-5 |
Key management utilies for GnuPG. This package is needed to import keys from a keyserver. |
|
gnuplot |
6.0.1-1 |
A portable command-line driven graphing utility |
|
gnutls-utils |
3.8.5-1 |
GnuTLS is a secure communications library implementing the SSL, TLS and DTLS protocols and technologies around them. It provides a simple C language application programming interface (API) to access the secure communications protocols as well as APIs to parse and write X.509, PKCS12, OpenPGP and other required structures. It is aimed to be portable and efficient with focus on security and interoperability. This package contains the GnuTLS gnutls-cli, gnutls-serv, psktool, and srptool utilities. |
|
go |
1.22.5-1 |
Go is an open source programming language that makes it easy to build simple, reliable, and efficient software. |
|
goaccess |
1.8.1-1 |
GoAccess is a real-time web log analyzer and interactive viewer that runs in a terminal in *nix systems or through your browser. |
|
goflow |
3.4.5-1 |
The high-scalability sFlow/NetFlow/IPFIX collector used internally at Cloudflare. (full) |
|
google-authenticator-libpam |
1.09-2 |
Google Authenticator PAM module |
|
gost-go |
3.0.0-nightly.20240625-1 |
A simple security tunnel written in golang |
|
gpgv |
1.4.23-5 |
GPGv is a stripped down version of GnuPG that only checks signatures. . GnuPG does not use any patented algorithms so it cannot be compatible with PGP2 because it uses IDEA (which is patented worldwide). |
|
gpgv2 |
2.2.39-1 |
GPGv is a stripped down version of GnuPG that only checks signatures. |
|
gpioctl-sysfs |
0.0.7-1 |
Tool for controlling gpio pins using the sysfs api provided by the kernel. |
|
gpsd |
3.25-1 |
gpsd is a userland daemon acting as a translator between GPS and AIS receivers and their clients. gpsd listens on port 2947 for clients requesting position/time/velocity information. The receivers are expected to generate position information in a well-known format -- as NMEA-0183 sentences, SiRF binary, Rockwell binary, Garmin binary format, or other vendor binary protocols. gpsd takes this information from the GPS and translates it into something uniform and easier to understand for clients. This package contains the GPS daemon. |
|
gpsd-clients |
3.25-1 |
gpsd is a userland daemon acting as a translator between GPS and AIS receivers and their clients. gpsd listens on port 2947 for clients requesting position/time/velocity information. The receivers are expected to generate position information in a well-known format -- as NMEA-0183 sentences, SiRF binary, Rockwell binary, Garmin binary format, or other vendor binary protocols. gpsd takes this information from the GPS and translates it into something uniform and easier to understand for clients. This package contains auxiliary tools and example clients for monitoring and testing the GPS daemon. |
|
gpsd-utils |
3.25-1 |
gpsd is a userland daemon acting as a translator between GPS and AIS receivers and their clients. gpsd listens on port 2947 for clients requesting position/time/velocity information. The receivers are expected to generate position information in a well-known format -- as NMEA-0183 sentences, SiRF binary, Rockwell binary, Garmin binary format, or other vendor binary protocols. gpsd takes this information from the GPS and translates it into something uniform and easier to understand for clients. This package contains utilities for interacting with GPS daemon. |
|
grafana |
10.4.5-1 |
The open and composable observability and data visualization platform. Visualize metrics, logs, and traces from multiple sources like Prometheus, Loki, Elasticsearch, InfluxDB, Postgres and many more. |
|
graphicsmagick |
1.3.43-1 |
GraphicsMagick is a free and open-source software suite for displaying, converting, and editing raster image and vector image files. It is a fork of ImageMagick. |
|
grep |
3.11-1 |
The grep command searches one or more input files for lines containing a match to a specified pattern. By default, grep prints the matching lines. |
|
grive2 |
0.5.3-5 |
This is the fork of original "Grive" (https://github.com/Grive/grive) Google Drive client with the support for the new Drive REST API and partial sync. |
|
groff |
1.23.0-1 |
This package contains optional components of the GNU troff text-formatting system. |
|
grpcurl |
1.9.1-1 |
grpcurl is a command-line tool that lets you interact with gRPC servers. It's basically curl for gRPC servers. |
|
gutenprint |
5.3.4-1 |
High quality drivers for Canon, Epson, Lexmark, Sony, Olympus, and PCL printers for use with CUPS and GIMP. |
|
gzip |
1.13-1 |
gzip (GNU zip) is a compression utility designed to be a replacement for compress. |
|
halog |
3.0.2-1 |
HAProxy Log Analyzer |
|
haproxy |
3.0.2-1 |
Open source Reliable, High Performance TCP/HTTP Load Balancer. This package is built with SSL and LUA support. |
|
haproxy-nossl |
3.0.2-1 |
Open source Reliable, High Performance TCP/HTTP Load Balancer. This package is built without SSL support. |
|
hardlink |
2.40.1-1 |
Consolidate duplicate files using hardlinks. |
|
hashdeep |
4.4-3 |
hashdeep is a set of tools to compute MD5, SHA1, SHA256, tiger and whirlpool hashsums of arbitrary number of files recursively. |
|
haveged |
1.9.18-2 |
Feeds the kernel entropy pool by timing CPU loops. |
|
hdparm |
9.65-1 |
get/set SATA/IDE device parameters |
|
hfsfsck |
540.1.linux3-2 |
Utilities to create and check HFS/HFS+ filesystems. (fsck.hfs and fsck.hfsplus for checking integrity of HFS/HFS+ volumes) |
|
hidapi |
0.14.0-1 |
HIDAPI is a multi-platform library which allows an application to interface with USB and Bluetooth HID-Class devices on Windows, Linux, FreeBSD, and Mac OS X. HIDAPI can be either built as a shared library (.so or .dll) or can be embedded directly into a target application by adding a single source file (per platform) and a single header. |
|
hlspxd |
2016-12-5 |
hlspxd works as a proxy with a DLNA server (xupnpd as an example) — it transforms HLS (m3u8) playlists into http streams. |
|
horst |
5.1-4 |
[horst] is a scanning and analysis tool for 802.11 wireless networks and especially IBSS (ad-hoc) mode and mesh networks (OLSR). |
|
hostip |
2019.08.20~07ac3825-3a |
The DNSCrypt proxy ships with a simple tool named hostip that resolves a name to IPv4 or IPv6 addresses. |
|
hplip-full |
3.23.12-1 |
HPLIP is an HP developed solution for printing, scanning, and faxing with HP inkjet and laser based printers in Linux. These are full files shared between subpackages |
|
hstr |
3.1.0-1 |
Easily view, navigate and search your command history with shell history suggest box for bash and zsh. |
|
htop |
3.3.0-2 |
Htop is an ncursed-based process viewer similar to top, but it allows to scroll the list vertically and horizontally to see all processes and their full command lines. |
|
httping |
3.5-1 |
Give it an url, and it'll show you how long it takes to connect, send a request and retrieve the reply (only the headers). Be aware that the transmission across the network also takes time! This package is built with SSL support. |
|
httping-nossl |
3.5-1 |
Give it an url, and it'll show you how long it takes to connect, send a request and retrieve the reply (only the headers). Be aware that the transmission across the network also takes time! This package is built without SSL support. |
|
https-dns-proxy |
2023.11.19-1 |
Light-weight DNS-over-HTTPS, non-caching translation proxy for the RFC 8484 DoH standard. It receives regular (UDP) DNS requests and resolves them via DoH resolver. Please see https://docs.openwrt.melmac.net/https-dns-proxy/ for more information. |
|
httrack |
3.49.5-1 |
HTTrack is a free and easy-to-use offline browser utility. It allows you to download a WWW site from the Internet to a local directory, building recursively all directories, getting HTML, images, and other files from the server to your computer. HTTrack arranges the original site's relative link-structure. |
|
hub-ctrl |
1.0-2 |
Control USB power on a port by port basis on some USB hubs. This only works on USB hubs that have the hardware necessary to allow software controlled power switching. Most hubs DO NOT include the hardware. |
|
hwclock |
2.40.1-1 |
hwclock is a tool for accessing the Hardware Clock |
|
i2c-tools |
4.3-3 |
This package contains an heterogeneous set of I2C tools for Linux. These tools were originally part of the lm-sensors package. |
|
i2pd |
2.50.2-2 |
I2P (Invisible Internet Protocol) is a universal anonymous network layer. All communications over I2P are anonymous and end-to-end encrypted, participants don't reveal their real IP addresses. |
|
icecast |
2.4.4-4 |
Icecast is a streaming media server which currently supports Ogg Vorbis and MP3 audio streams. It can be used to create an Internet radio station or a privately running jukebox and many things in between. It is very versatile in that new formats can be added relatively easily and supports open standards for commuincation and interaction. |
|
ices |
2.0.3-1 |
ices is a command line source client for Icecast media streaming servers. It began as the successor of the old "shout" utility, and has since gained a lot of useful features. |
|
iconv |
1.17-1 |
Character set conversion utility |
|
icu |
75.1-1 |
ICU is a mature, widely used set of C/C++ and Java libraries providing Unicode and Globalization support for software applications. ICU is widely portable and gives applications the same results on all platforms and between C/C++ and Java software. This package supports C/C++. |
|
icu-data-tools |
75.1-1 |
This package provides tools for manipulating ICU data. |
|
icu-full-data |
75.1-1 |
ICU makes use of a wide variety of data tables to provide many of its services. Examples include converter mapping tables, collation rules, transliteration rules, break iterator rules and dictionaries, and other locale data. This package contains the complete data library provided by ICU. A custom data library can be generated at http://apps.icu-project.org/datacustom/ |
|
id3lib |
3.8.3-2 |
An ID3v1/ID3v2 tag manipulation library |
|
idn |
1.42-1 |
GNU Libidn is a fully documented implementation of the Stringprep, Punycode and IDNA specifications. Libidn's purpose is to encode and decode internationalized domain names. Command line tool using libidn |
|
ifstat |
1.1-4 |
ifstat is a tool to report network interfaces bandwidth just like vmstat/iostat do for other system counters. It can monitor local interfaces by polling the kernel counters, or remote hosts interfaces using SNMP. |
|
iftop |
2018.10.03~77901c8c-2 |
iftop does for network usage what top(1) does for CPU usage. It listens to network traffic on a named interface and displays a table of current bandwidth usage by pairs of hosts. Handy for answering the question 'why is our ADSL link so slow?'. |
|
igmpproxy |
0.4-1 |
IGMPproxy is a simple dynamic Multicast Routing Daemon using only IGMP signalling (Internet Group Management Protocol). |
|
imagemagick |
7.1.1.33-1 |
ImageMagick is a free and open-source software suite for displaying, converting, and editing raster image and vector image files. NOTE: this package may not be suitable for many embedded devices because of its large size. Consider using extroot or alternatively consider graphicsmagick which is smaller but similar in functionality. |
|
imapfilter |
2.8.2-1 |
IMAPFilter is a mail filtering utility. It connects to remote mail servers using the Internet Message Access Protocol (IMAP), sends searching queries to the server and processes mailboxes based on the results. It can be used to delete, copy, move, flag, etc. messages residing in mailboxes at the same or different mail servers. The 4rev1 and 4 versions of the IMAP protocol are supported. IMAPFilter uses the Lua programming language as a configuration and extension language. |
|
inadyn |
2.11.0-1 |
Inadyn is a small and simple Dynamic DNS, DDNS, client with HTTPS support |
|
incron |
0.5.12-2 |
This program is the "inotify cron" system. You can use it a similar way as the regular cron. The difference is that the inotify cron handles filesystem events rather than time periods. |
|
inetutils |
2.5-1 |
Inetutils is a collection of common network programs. |
|
ink |
0.5.3 |
A utility for reading ink levels |
|
inotifywait |
4.23.9.0-2 |
inotify-tools is a C library and a set of command-line programs for Linux providing a simple interface to inotify. These programs can be used to monitor and act upon filesystem events. A more detailed description of the programs is further down the page. The programs are written in C and have no dependencies other than a Linux kernel supporting inotify. This package provides the inotifywait tool. |
|
inotifywatch |
4.23.9.0-2 |
inotify-tools is a C library and a set of command-line programs for Linux providing a simple interface to inotify. These programs can be used to monitor and act upon filesystem events. A more detailed description of the programs is further down the page. The programs are written in C and have no dependencies other than a Linux kernel supporting inotify. This package provides the inotifywatch tool. |
|
io |
4 |
This tool can be used to access physical memory addresses from userspace. It can be useful to access hardware for which no device driver exists! |
|
iodine |
0.8.0-4 |
iodine client version |
|
iodined |
0.8.0-4 |
iodine server version |
|
ionice |
2.40.1-1 |
This program sets or gets the io scheduling class and priority for a program. If no arguments or just -p is given, ionice will query the current io scheduling class and priority for that process. |
|
ioping |
1.3-1 |
A tool to monitor I/O latency in real time. It shows disk latency in the same way as ping shows network latency. |
|
iotop |
0.6-1 |
Iotop is a Python program with a top like UI used to show of behalf of which process is the I/O going on. |
|
ip-bridge |
4.4.0-10b |
Bridge configuration utility from iproute2 |
|
ip-full |
4.4.0-10b |
Routing control utility (Full) |
|
ipcad |
3.7.3-3 |
This daemon listens for traffic on the specified interfaces. It has the built-in RSH and NetFlow engines to allow exporting the accounting data the same way as Cisco routers do. |
|
ipcs |
2.40.1-1 |
ipcs shows information on the inter-process communication facilities for which the calling process has read access. By default it shows information about all three resources: shared memory segments, message queues, and semaphore arrays. |
|
iperf |
2.1.9-1 |
Iperf is a modern alternative for measuring TCP and UDP bandwidth performance, allowing the tuning of various parameters and characteristics. |
|
iperf3 |
3.17.1-2 |
Iperf is a modern alternative for measuring TCP and UDP bandwidth performance, allowing the tuning of various parameters and characteristics. |
|
ipmitool |
1.8.18-5 |
Command-line interface to IPMI-enabled devices |
|
iprange |
1.0.4-1 |
Manage IP ranges. |
|
ipset |
7.21-1 |
IPset administration utility |
|
ipset-dns |
2017.10.08~ade2cf88-1c |
The ipset-dns daemon is a lightweight DNS forwarding server that adds all resolved IPs to a given netfilter ipset. It is designed to be used in conjunction with dnsmasq's upstream server directive. Practical use cases include routing over a given gateway traffic for particular web services or webpages that do not have a priori predictable IP addresses and instead rely on dizzying arrays of DNS resolutions. |
|
iptables |
1.4.21-4 |
IP firewall administration tool. Matches: - icmp - tcp - udp - comment - conntrack - limit - mac - mark - multiport - set - state - time Targets: - ACCEPT - CT - DNAT - DROP - REJECT - LOG - MARK - MASQUERADE - REDIRECT - SET - SNAT - TCPMSS Tables: - filter - mangle - nat - raw |
|
iptables |
1.4.21-4 |
IP firewall administration tool. Matches: - icmp - tcp - udp - comment - conntrack - limit - mac - mark - multiport - set - state - time Targets: - ACCEPT - CT - DNAT - DROP - REJECT - LOG - MARK - MASQUERADE - REDIRECT - SET - SNAT - TCPMSS Tables: - filter - mangle - nat - raw |
|
iptraf |
3.0.1-3 |
IPTraf is a console-based network statistics utility for Linux. It gathers a variety of figures such as TCP connection packet and byte counts, interface statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN station packet and byte counts. |
|
iptraf-ng |
1.2.1-1 |
iptraf-ng is a console-based network statistics utility for Linux. It gathers a variety of figures such as TCP connection packet and byte counts, interface statistics and activity indicators, TCP/UDP traffic breakdowns, and LAN station packet and byte counts. |
|
iputils-arping |
20190709-1c |
Send ARP REQUEST packets to a neighbor host |
|
iputils-clockdiff |
20190709-1c |
Measure the clock difference between two hosts |
|
iputils-ping |
20190709-1c |
Send ICMP_ECHOREQUEST packets to IP hosts and report on replies |
|
iputils-tftpd |
20190709-1c |
Trivial File Transfer Protocol server |
|
iputils-tracepath |
20190709-1c |
trace network path to a host, discovering PMTU |
|
ipv6calc |
4.2.0-1 |
ipv6calc is a small utility written in programming languate C to manipulate (not only) IPv6 addresses. Intentions were convering a given IPv6 address into compressed format, convering a given IPv6 address into the same format like shown in /proc/net/if_inet6 and (because it was not difficulty) migrating the Perl program ip6_int into. Now only one utiltity is needed to do a lot. This package contains an ipv6calc with the internal databases enabled. |
|
ipv6log |
4.2.0-1 |
ipv6calc is a small utility written in programming languate C to manipulate (not only) IPv6 addresses. Intentions were convering a given IPv6 address into compressed format, convering a given IPv6 address into the same format like shown in /proc/net/if_inet6 and (because it was not difficulty) migrating the Perl program ip6_int into. Now only one utiltity is needed to do a lot. This package contains webserver log anonymization, conversion, and statistics helper programs with the internal databases enabled. |
|
irssi |
1.4.5-1 |
Irssi is a terminal based IRC client for UNIX systems. |
|
isc-dhcp-client-ipv4 |
4.4.3-P1-7 |
provides a means for configuring one or more network interfaces using the Dynamic Host Configuration Protocol, BOOTP protocol, or if these protocols fail, by statically assigning an address. This package is compiled with IPv4 support only. |
|
isc-dhcp-client-ipv6 |
4.4.3-P1-7 |
provides a means for configuring one or more network interfaces using the Dynamic Host Configuration Protocol, BOOTP protocol, or if these protocols fail, by statically assigning an address. This package is compiled with IPv4 and IPv6 support. |
|
isc-dhcp-dyndns |
4.4.3-P1-7 |
implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). |
|
isc-dhcp-omshell-ipv4 |
4.4.3-P1-7 |
provides an interactive way to connect to, query, and possibly change, the ISC DHCP Server's state via OMAPI, the Object Management API. This package is compiled with IPv4 support only. |
|
isc-dhcp-omshell-ipv6 |
4.4.3-P1-7 |
provides an interactive way to connect to, query, and possibly change, the ISC DHCP Server's state via OMAPI, the Object Management API. This package is compiled with IPv4 and IPv6 support. |
|
isc-dhcp-relay-ipv4 |
4.4.3-P1-7 |
provides a means for relaying DHCP and BOOTP requests from a subnet to which no DHCP server is directly connected to one or more DHCP servers on other subnets. This package is compiled with IPv4 support only. |
|
isc-dhcp-relay-ipv6 |
4.4.3-P1-7 |
provides a means for relaying DHCP and BOOTP requests from a subnet to which no DHCP server is directly connected to one or more DHCP servers on other subnets. This package is compiled with IPv4 and IPv6 support. |
|
isc-dhcp-server-ipv4 |
4.4.3-P1-7 |
implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 support only. |
|
isc-dhcp-server-ipv6 |
4.4.3-P1-7 |
implements the Dynamic Host Configuration Protocol (DHCP) and the Internet Bootstrap Protocol (BOOTP). This package is compiled with IPv4 and IPv6 support. |
|
istgt |
20150713-3 |
This is a BSD Port of istgt, which provides iSCSI target side protocol (refer to RFC3720 about iSCSI) and SPC-3 (SCSI Primary Commands - 3) based logical unit emulation. |
|
isync |
1.4.4-1 |
isync is a command line application which synchronizes mailboxes; currently Maildir and IMAP4 mailboxes are supported. New messages, message deletions and flag changes can be propagated both ways. isync is suitable for use in IMAP-disconnected mode. |
|
jailkit |
2.23-1 |
Jailkit is a set of utilities to limit user accounts to specific files using chroot() and or specific commands. Setting up a chroot shell, a shell limited to some specific command, or a daemon inside a chroot jail is a lot easier and can be automated using these utilities. |
|
jansson |
2.14-3 |
Jansson is a C library for encoding, decoding and manipulating JSON data |
|
jbigkit |
2.1-1 |
JBIG1 data compression standard (ITU-T T.82) utilities, which was designed for bi-level high-resolution image data such as scanned documents. |
|
jdupes |
1.27.3-1 |
Jdupes is a program for identifying or deleting duplicate files residing within specified directories. |
|
jhead |
3.08-1 |
Exif Jpeg header manipulation tool. |
|
jo |
1.9-1 |
jo is a small utility to create JSON objects. |
|
joe |
4.6-2 |
Joe is world-famous Wordstar like text editor, that also features Emacs and Pico emulation |
|
joe-extras |
4.6-2 |
Additional data for full Joe editor functionality |
|
jose |
11-6 |
jose is a command line utility for performing various tasks on JSON Object Signing and Encryption (JOSE) objects. José provides a full crypto stack including key generation, signing and encryption. |
|
jq |
1.7.1-1 |
Lightweight and flexible command-line JSON processor. |
|
jshn |
2024.03.29~eb9bcb64-1 |
Library for parsing and generating JSON from shell scripts |
|
jsoncpp |
1.9.5-2 |
JsonCpp is a C++ library that allows manipulating JSON values, including serialization and deserialization to and from strings. It can also preserve existing comment in unserialization/serialization steps, making it a convenient format to store user input files. |
|
jsonfilter |
2024.01.23~594cfa86-1 |
OpenWrt JSON filter utility |
|
kea-admin |
2.4.0-2 |
A useful tool for database backend maintenance (creating a new database, checking versions, upgrading etc.). |
|
kea-ctrl |
2.4.0-2 |
Tool to start, stop, reconfigure, and report status for the Kea servers. |
|
kea-dhcp-ddns |
2.4.0-2 |
The DHCP Dynamic DNS process. This process acts as an intermediary between the DHCP servers and DNS servers. It receives name update requests from the DHCP servers and sends DNS Update messages to the DNS servers. |
|
kea-dhcp4 |
2.4.0-2 |
The DHCPv4 server process. This process responds to DHCPv4 queries from clients. |
|
kea-dhcp6 |
2.4.0-2 |
The DHCPv6 server process. This process responds to DHCPv6 queries from clients. |
|
kea-hook-ha |
2.4.0-2 |
The high availability hook library. |
|
kea-hook-lease-cmds |
2.4.0-2 |
The lease commands hook library. |
|
kea-lfc |
2.4.0-2 |
This process removes redundant information from the files used to provide persistent storage for the memfile data base backend. While it can be run standalone, it is normally run as and when required by the Kea DHCP servers. |
|
kea-libs |
2.4.0-2 |
Kea required Libraries. |
|
kea-perfdhcp |
2.4.0-2 |
A DHCP benchmarking tool which simulates multiple clients to test both DHCPv4 and DHCPv6 server performance. |
|
kea-shell |
2.4.0-2 |
This simple text client uses the REST interface to connect to the Kea Control Agent. |
|
keepalived |
2.2.8-7 |
VRRP with failover and monitoring daemon for Linux Virtual Server (LVS) clusters. |
|
kexec |
2.0.28-2 |
The kexec utility allows to load and boot another kernel. |
|
kexec-tools |
2.0.28-2 |
kexec is a set of system calls that allows you to load another kernel from the currently executing Linux kernel. The kexec utility allows to load and boot another kernel. |
|
keyctl |
1.6.3-2 |
keyctl |
|
keyutils |
1.6.3-2 |
Key utilities |
|
kmod |
32-1 |
Linux kernel module handling kmod is a set of tools to handle common tasks with Linux kernel modules like insert, remove, list, check properties, resolve dependencies and aliases. |
|
kmod_ndms |
30-1 |
Linux kernel module handling. kmod is a set of tools to handle common tasks with Linux kernel modules like insert, remove, list, check properties, resolve dependencies and aliases. |
|
knock |
0.8-1 |
It listens to all traffic on an ethernet (or PPP) interface, looking for special "knock" sequences of port-hits. A client makes these port-hits by sending a TCP (or UDP) packet to a port on the server. This port need not be open -- since knockd listens at the link-layer level, it sees all traffic even if it's destined for a closed port. When the server detects a specific sequence of port-hits, it runs a command defined in its configuration file. This can be used to open up holes in a firewall for quick access. This package contains the port-knocking client. |
|
knockd |
0.8-1 |
It listens to all traffic on an ethernet (or PPP) interface, looking for special "knock" sequences of port-hits. A client makes these port-hits by sending a TCP (or UDP) packet to a port on the server. This port need not be open -- since knockd listens at the link-layer level, it sees all traffic even if it's destined for a closed port. When the server detects a specific sequence of port-hits, it runs a command defined in its configuration file. This can be used to open up holes in a firewall for quick access. This package contains the port-knocking server. |
|
knot |
3.3.7-1 |
High-performance authoritative-only DNS server. |
|
knot-dig |
3.3.7-1 |
Knot DNS advanced DNS lookup utility. |
|
knot-host |
3.3.7-1 |
Knot DNS simple DNS lookup utility. |
|
knot-keymgr |
3.3.7-1 |
Knot DNS DNSSEC key management utility. |
|
knot-libs |
3.3.7-1 |
Knot DNS common DNS and DNSSEC libraries. |
|
knot-libzscanner |
3.3.7-1 |
Knot DNS zone parser library. |
|
knot-nsupdate |
3.3.7-1 |
Knot DNS dynamic DNS update utility. |
|
knot-resolver |
5.7.1-1 |
The Knot Resolver is a caching full resolver implementation, including both a resolver library and a daemon. |
|
knot-tests |
3.3.7-1 |
Unit tests for the Knot DNS server and libraries. Usage: /opt/share/knot/runtests.sh |
|
knot-zonecheck |
3.3.7-1 |
Knot DNS zonefile check utility. |
|
kopia |
0.17.0-1 |
Kopia is a fast and secure open-source backup/restore tool that allows you to create encrypted snapshots of your data and save the snapshots to remote or cloud storage of your choice, to network-attached storage or server, or locally on your machine. |
|
krb5-libs |
1.21.2-1 |
Kerberos 5 Shared Libraries |
|
lame |
3.100-1 |
lame mp3 encoder |
|
lame-lib |
3.100-1 |
lame mp3 encoder libs |
|
lcd4linux-full |
2019.07.19~0b83bb3a-10 |
LCD4Linux is a small program that grabs information from the kernel and some subsystems and displays it on an external liquid crystal display. . This package contains a version of LCD4Linux built with all supported drivers and plugins. |
|
lcdproc-clients |
0.5.9-8 |
LCDProc is a daemon and clients for displaying system information on various LCD displays This package contains the clients distributed by the official lcdproc project: * lcdproc -- displays system information * lcdexec -- displays a menu structure to execute commands * lcdvc -- shows the content of the system console |
|
lcdproc-drivers |
0.5.9-8 |
LCDProc is a daemon and clients for displaying system information on various LCD displays This package contains display drivers with external dependencies: curses futaba glcd hd44780 IOWarrior i2500vfd lis picolcd shuttleVFD ula200 |
|
lcdproc-server |
0.5.9-8 |
LCDProc is a daemon and clients for displaying system information on various LCD displays This package contains the server and a core set of display drivers without external dependencies: bayrad CFontzPacket CFontz CwLnx ea65 EyeboxOne glk icp_a106 imonlcd imon irtrans joy lb216 lcdm001 lcterm linux_input MD8800 ms6931 mtc_s16209x MtxOrb NoritakeVFD Olimex_MOD_LCD1x9 pyramid rawserial serialPOS serialVFD sli SureElec text tyan vlsys_m428 yard2LCD |
|
lcms |
2.16-1 |
Little CMS color engine. |
|
ldconfig |
2.27-11 |
Shared library path configuration |
|
ldd |
2.27-11 |
LDD trace utility |
|
less |
643-1 |
Full version of GNU less utility |
|
lft |
3.91-1 |
LFT, short for Layer Four Traceroute, is a sort of 'traceroute' that often works much faster (than the commonly-used Van Jacobson method) and goes through many configurations of packet-filters (firewalls). More importantly, LFT implements numerous other features including AS number lookups through several reliable sources, loose source routing, netblock name lookups, et al. This package contains the lft 'traceroute' program. |
|
lftp |
4.9.2-2 |
LFTP is a sophisticated file transfer program with command line interface. It supports FTP, HTTP, FISH, SFTP, HTTPS and FTPS protocols. GNU Readline library is used for input. Every operation in lftp is reliable, that is any non-fatal error is handled and the operation is retried automatically. So if downloading breaks, it will be restarted from the point automatically. Even if ftp server does not support REST command, lftp will try to retrieve the file from the very beginning until the file is transferred completely. This is useful for dynamic-ip machines which change their IP addresses quite often, and for sites with very bad internet connectivity. lftp has shell-like command syntax allowing you to launch several commands in parallel in background (&). It is also possible to group commands within () and execute them in background. All background jobs are executed in the same single process. You can bring a foreground job to background with ^Z (c-z) and back with command `wait' (or `fg' which is alias to `wait'). To list running jobs, use command `jobs'. Some commands allow redirecting their output (cat, ls, ...) to file or via pipe to external command. Commands can be executed conditionally based on termination status of previous command (&&, ||). lftp has builtin mirror which can download or update a whole directory tree. There is also reverse mirror (mirror -R) which uploads or updates a directory tree on server. |
|
libacl |
2.3.2-2 |
Access control list support This package provides libacl |
|
libaio |
0.3.113-3 |
Linux kernel AIO interface access library |
|
libapr |
1.7.4-1 |
Apache Portable Runtime Library |
|
libaprutil |
1.6.3-1 |
Apache Portable Runtime Utility Library |
|
libaprutil-crypto-openssl |
1.6.3-1 |
libaprutil - OpenSSL driver |
|
libaprutil-ldap |
1.6.3-1 |
libaprutil - LDAP driver |
|
libarchive |
3.7.4-1 |
Multi-format archive and compression library |
|
libart |
2.3.21-1 |
A library of functions for 2D graphics supporting a superset of the PostScript imaging model, designed to be integrated with graphics, artwork, and illustration programs. It is written in optimized C, and is fully compatible with C++. With a small footprint of 10,000 lines of code, it is especially suitable for embedded applications. |
|
libaspell |
0.60.8.1-1 |
GNU Aspell library |
|
libassuan |
2.5.6-1 |
Libassuan is a small library implementing the so-called Assuan protocol. This protocol is used for IPC between most newer GnuPG components. Both, server and client side functions are provided. |
|
libatasmart |
2012.05.21~de625894-1 |
This library is supposed to be lean and small and thus supports only a subset of the S.M.A.R.T. functionality. However, I claim that it implements the relevant part of it. If you need full control over all S.M.A.R.T. functionality of your hardware please refer to smartmontools. |
|
libatomic |
8.4.0-11 |
Atomic support library |
|
libattr |
2.5.2-3 |
Extended attributes support This package provides libattr |
|
libavahi-client |
0.8-9 |
Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This packages adds the libavahi-client library. It also automatically adds the required libavahi-dbus-support and the avahi-dbus-daemon packages. For more information please see the avahi documentation. |
|
libavahi-dbus-support |
0.8-9 |
Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . The libavahi package contains the mDNS/DNS-SD shared libraries, used by other programs. Specifically, it provides libavahi-core and libavahi-common libraries. . The libavahi-dbus-support package enables D-Bus support in avahi, needed to support the libavahi-client library and avahi-utils. . Selecting this package modifies the build configuration so that avahi packages are built with support for D-BUS enabled; it does not generate a separate binary of its own. It also automatically adds the D-Bus package to the build. libavahi-dbus-support is selected automatically if you select libavahi-client or avahi-utils. |
|
libavahi-glib |
0.8-9 |
Avahi is an mDNS/DNS-SD (aka RendezVous/Bonjour/ZeroConf) implementation (library). It facilitates service discovery on a local network -- this means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in MacOS X (branded 'Rendezvous', 'Bonjour' and sometimes 'ZeroConf') and is very convenient. . This packages adds the libavahi-glib library. |
|
libbfd |
2.42-1 |
libbfd |
|
libblkid |
2.40.1-1 |
The libblkid library is used to identify block devices (disks) as to their content (e.g. filesystem type, partitions) as well as extracting additional information such as filesystem labels/volume names, partitions, unique identifiers/serial numbers... |
|
libblobmsg-json |
2024.03.29~eb9bcb64-1 |
blobmsg <-> json conversion library |
|
libbsd |
0.11.8-1 |
This library provides useful functions commonly found on BSD systems, and lacking on others like GNU systems, thus making it easier to port projects with strong BSD origins, without needing to embed the same code over and over again on each project. |
|
libbz2 |
1.0.8-1a |
bzip2 is a freely available, patent free, high-quality data compressor. This packages provides libbz2 library. |
|
libc |
2.27-11 |
C library |
|
libcap |
2.69-1 |
Linux capabilities library library |
|
libcap-bin |
2.69-1 |
Linux capabilities . This package contains the libcap utilities. |
|
libcap-ng |
0.8.4-1 |
POSIX capabilities library library |
|
libcap-ng-bin |
0.8.4-1 |
POSIX capabilities library . This package contains the libcap-ng utilities. |
|
libcares |
1.29.0-1 |
c-ares is a C library for asynchronous DNS requests (including name resolves) C89 compatibility, MIT licensed, builds for and runs on POSIX, Windows, Netware, Android and many more operating systems. |
|
libcbor |
0.11.0-1 |
libcbor is a C library for parsing and generating CBOR, the general-purpose schema-less binary data format. |
|
libcharset |
1.17-1 |
Character set conversion library |
|
libcomerr |
1.47.0-2 |
This package contains libcom_err, the common error description library bundled with e2fsprogs. |
|
libconfig |
1.7.3-1 |
Libconfig is a simple library for manipulating structured configuration files. This file format is more compact and more readable than XML. And unlike XML, it is type-aware, so it is not necessary to do string parsing in application code. Libconfig is very compact -- just 38K for the stripped C shared library (less than one-fourth the size of the expat XML parser library) and 66K for the stripped C++ shared library. This makes it well-suited for memory-constrained systems like handheld devices. |
|
libcryptopp |
5.6.4-2 |
Crypto++ Library is a free C++ class library of cryptographic schemes. |
|
libctf |
2.42-1 |
libctf |
|
libcups |
2.2.12-2a |
Common UNIX Printing System - Core library |
|
libcurl |
8.8.0-2 |
A client-side URL transfer library |
|
libdaemon |
0.14-5 |
libdaemon is a lightweight C library that eases the writing of UNIX daemons. It consists of the following parts: - A wrapper around fork() which does the correct daemonization procedure of a process - A wrapper around syslog() for simpler and compatible log output to Syslog or STDERR - An API for writing PID files - An API for serializing UNIX signals into a pipe for usage with select() or poll() - An API for running subprocesses with STDOUT and STDERR redirected to syslog APIs like these are used in most daemon software available. It is not that simple to get it done right and code duplication is not a goal. |
|
libdb47 |
4.7.25.4.NC-7 |
Berkeley DB library (4.7). |
|
libdbi |
0.9.0-5 |
This package provides a database-independent abstraction layer library in C. |
|
libdbus |
1.14.10-1 |
Simple interprocess messaging system (library) |
|
libdeflate |
1.20-1 |
library for fast, whole-buffer DEFLATE-based compression and decompression |
|
libdevmapper |
1.02.197 |
The device-mapper is a component of the 2.6 linux kernel that supports logical volume management. It is required by LVM2 and EVMS. |
|
libdnet |
1.16.1-1 |
libdnet is a library of simplified, portable interface to several low-level networking routines. |
|
libdvbapi |
r3d43b280298c-2 |
Linux DVB API applications and utilities. . This package contains the Linux DVB dvbapi library. |
|
libdvbcfg |
r3d43b280298c-2 |
Linux DVB API applications and utilities. . This package contains the Linux DVB dvbcfg library. |
|
libdvbcsa |
0~bc6c0b16-2 |
Libdvbcsa is a free implementation of the DVB Common Scrambling Algorithm DVB/CSA - with encryption and decryption capabilities. |
|
libdvben50221 |
r3d43b280298c-2 |
Linux DVB API applications and utilities. . This package contains the Linux DVB dvben50221 library. |
|
libdvbsec |
r3d43b280298c-2 |
Linux DVB API applications and utilities. . This package contains the Linux DVB dvbsec library. |
|
libdw |
0.191-1 |
ELF manipulation libraries (libdw) |
|
libe2p |
1.47.0-2 |
This package contains libe2p, ext2fs userspace programs utility library bundled with e2fsprogs. |
|
libedit |
20240517-3.1-1 |
Generic line editing, history, and tokenization functions similar to GNU Readline. |
|
libelf |
0.191-1 |
ELF manipulation libraries (libelf) |
|
libesg |
r3d43b280298c-2 |
Linux DVB API applications and utilities. . This package contains the Linux DVB esg library. |
|
libespeak-ng |
1.50-2 |
eSpeak NG is an open source speech synthesizer that supports more than hundred languages and accents. |
|
libev |
4.33-2 |
A full-featured and high-performance event loop that is loosely modelled after libevent, but without its limitations and bugs. |
|
libevdev |
1.13.1-1 |
libevdev is a wrapper library for evdev devices. it moves the common tasks when dealing with evdev devices into a library and provides a library interface to the callers, thus avoiding erroneous ioctls, etc. The eventual goal is that libevdev wraps all ioctls available to evdev devices, thus making direct access unnecessary. |
|
libevent2 |
2.1.12-2 |
The libevent API provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. Furthermore, libevent also support callbacks due to signals or regular timeouts. libevent is meant to replace the event loop found in event driven network servers. An application just needs to call event_dispatch() and then add or remove events dynamically without having to change the event loop. This package contains the libevent shared library historically containing both the core & extra libraries. |
|
libevent2-core |
2.1.12-2 |
The libevent API provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. Furthermore, libevent also support callbacks due to signals or regular timeouts. libevent is meant to replace the event loop found in event driven network servers. An application just needs to call event_dispatch() and then add or remove events dynamically without having to change the event loop. This package contains the libevent core shared library for the event, buffer & utility functions. |
|
libevent2-extra |
2.1.12-2 |
The libevent API provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. Furthermore, libevent also support callbacks due to signals or regular timeouts. libevent is meant to replace the event loop found in event driven network servers. An application just needs to call event_dispatch() and then add or remove events dynamically without having to change the event loop. This package contains the libevent extra shared library for specific protocols including HTTP, DNS & RPC. |
|
libevent2-openssl |
2.1.12-2 |
The libevent API provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. Furthermore, libevent also support callbacks due to signals or regular timeouts. libevent is meant to replace the event loop found in event driven network servers. An application just needs to call event_dispatch() and then add or remove events dynamically without having to change the event loop. This package contains the libevent OpenSSL shared library for encrypted bufferevents. |
|
libevent2-pthreads |
2.1.12-2 |
The libevent API provides a mechanism to execute a callback function when a specific event occurs on a file descriptor or after a timeout has been reached. Furthermore, libevent also support callbacks due to signals or regular timeouts. libevent is meant to replace the event loop found in event driven network servers. An application just needs to call event_dispatch() and then add or remove events dynamically without having to change the event loop. This package contains the libevent Pthreads shared library for threading & locking. |
|
libexif |
0.6.24-1 |
libexif is a library for parsing, editing, and saving EXIF data. It is intended to replace lots of redundant implementations in command-line utilities and programs with GUIs. |
|
libexiv2 |
0.28.3-1 |
library and a command-line utility to read, write, delete and modify Exif, IPTC, XMP and ICC image metadata. |
|
libexpat |
2.6.2-1 |
A fast, non-validating, stream-oriented XML parsing library. |
|
libexslt |
1.1.39-1 |
An extension for XSLT. |
|
libext2fs |
1.47.0-2 |
libext2fs is a library which can access ext2, ext3 and ext4 filesystems. |
|
libf2fs |
1.16.0-3 |
Library for Flash-Friendly File System (F2FS) tools |
|
libfaad2 |
2.11.1-2 |
FAAD2 is the fastest ISO AAC audio decoder available. FAAD2 correctly decodes all MPEG-4 and MPEG-2 MAIN, LOW, LTP, LD and ER object type AAC files. This package contains the library. |
|
libfdisk |
2.40.1-1 |
The libfdisk library is used for manipulating with partition tables. |
|
libffi |
3.4.6-1 |
The libffi library provides a portable, high level programming interface to various calling conventions. This allows a programmer to call any function specified by a call interface description at run-time. FFI stands for Foreign Function Interface. A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language. The libffi library really only provides the lowest, machine dependent layer of a fully featured foreign function interface. A layer must exist above libffi that handles type conversions for values passed between the two languages. |
|
libffmpeg-full |
5.1.4-2 |
FFmpeg is a a software package that can record, convert and stream digital audio and video in numerous formats. FFmpeg licensing / patent issues are complex. It is the reponsibility of the user to understand any requirements in this regard with its usage. See: https://ffmpeg.org/legal.html for further information. . This package contains full-featured FFmpeg shared libraries. |
|
libffmpegthumbnailer |
2.2.2-2 |
libffmpegthumbnailer is a library that can be used to create thumbnails for your video files. |
|
libfido2 |
1.14.0-1 |
libfido2 provides library functionality and command-line tools to communicate with a FIDO device over USB, and to verify attestation and assertion signatures. libfido2 supports the FIDO U2F (CTAP 1) and FIDO 2.0 (CTAP 2) protocols. |
|
libfko |
2.6.11-1 |
Fwknop implements an authorization scheme known as Single Packet Authorization (SPA) for Linux systems running iptables. This mechanism requires only a single encrypted and non-replayed packet to communicate various pieces of information including desired access through an iptables policy. The main application of this program is to use iptables in a default-drop stance to protect services such as SSH with an additional layer of security in order to make the exploitation of vulnerabilities (both 0-day and unpatched code) much more difficult. This package contains the libfko shared library. |
|
libflac |
1.4.3-1 |
Free Lossless Audio Codec library |
|
libfmt |
11.0.1-1 |
fmt is an open-source formatting library for C++. It can be used as a safe alternative to printf or as a fast alternative to IOStreams. |
|
libfreetype |
2.13.2-1 |
The FreeType project is a team of volunteers who develop free, portable and high-quality software solutions for digital typography. They specifically target embedded systems and focus on bringing small, efficient and ubiquitous products. |
|
libftdi1 |
1.5-2a |
libFTDI - FTDI USB driver with bitbang mode libFTDI is an open source library to talk to FTDI chips: FT232BM, FT245BM, FT2232C, FT2232H, FT4232H, FT2232D and FT245R, including the popular bitbang mode. The library is linked with your program in userspace, no kernel driver required. |
|
libfuse |
2.9.9-2b |
FUSE (Filesystem in UserSpacE) This package contains the FUSE shared libraries, needed by other programs. - libfuse - libulockmgr |
|
libfuse3 |
3.16.2-1 |
fuse3 (Filesystem in UserSpacE) This package contains the fuse3 shared libraries, needed by other programs. - libfuse3 |
|
libgcc |
8.4.0-11 |
GCC support library |
|
libgcrypt |
1.10.3-1 |
This is a general purpose cryptographic library based on the code from GnuPG. It provides functions for all cryptograhic building blocks: symmetric ciphers (AES, DES, Arcfour, CAST5), hash algorithms (MD5, SHA-1, RIPE-MD160, SHA-224/256, SHA-384/512), MACs (HMAC for all hash algorithms), public key algorithms (RSA, DSA), large integer functions, random numbers and a lot of supporting functions. Some algorithms have been disabled to reduce size (Blowfish, Twofish, Serpent, RC2, SEED, Camellia, CRC, MD4, TIGER-192, Whirlpool, ElGamal, ECC). |
|
libgd |
2.3.3-1 |
GD is an open source code library for the dynamic creation of images by programmers. GD creates PNG, JPEG and GIF images, among other formats. |
|
libgd-full |
2.3.3-1 |
GD is an open source code library for the dynamic creation of images by programmers. GD creates PNG, JPEG and GIF images, among other formats. . This variant of the libgd package is compiled will all features enabled. |
|
libgdbm |
1.23-1 |
GNU database manager library GNU dbm is a set of database routines that use extendible hashing and works similar to the standard UNIX dbm routines. |
|
libgensio |
2.8.4-1 |
This project (pronounced gen'-see-oh) is used to abstract stream I/O like serial port, TCP, telnet, UDP, SSL, IPMI SOL etc and offers a framework for giving a consistent view of various stream (and packet) I/O types. You create a gensio object (or a gensio), and you can use that gensio without having to know too much about what is going on underneath. You can stack gensio on top of another one to add protocol funcionality. For instance, you can create a TCP gensio, stack SSL on top of that, and stack Telnet on top of that. It supports a number of network I/O and serial ports. Gensio can be used for sending and receiving ports, and it also supports establishing encrypted and authenticated connections. . This package contains the runtime libraries. |
|
libgmp |
6.3.0-1 |
GMP is a free library for arbitrary precision arithmetic, operating on signed integers, rational numbers, and floating point numbers. |
|
libgnutls |
3.8.5-1 |
GnuTLS is a secure communications library implementing the SSL, TLS and DTLS protocols and technologies around them. It provides a simple C language application programming interface (API) to access the secure communications protocols as well as APIs to parse and write X.509, PKCS12, OpenPGP and other required structures. It is aimed to be portable and efficient with focus on security and interoperability. This package contains the GnuTLS shared library, needed by other programs. |
|
libgpg-error |
1.49-1 |
An helper library for common error codes and descriptions. This is a library that defines common error values for all GnuPG components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt, Libksba, DirMngr, Pinentry, SmartCard Daemon and possibly more in the future. |
|
libgpgme |
1.21.0-1 |
GnuPG Made Easy (GPGME) is a library designed to make access to GnuPG easier for applications. It provides a High-Level Crypto API for encryption, decryption, signing, signature verification and key management. Currently it uses GnuPG's OpenPGP backend as the default, but the API isn't restricted to this engine. We have, in fact, already developed a backend for CMS (S/MIME). |
|
libgps |
3.25-1 |
gpsd is a userland daemon acting as a translator between GPS and AIS receivers and their clients. gpsd listens on port 2947 for clients requesting position/time/velocity information. The receivers are expected to generate position information in a well-known format -- as NMEA-0183 sentences, SiRF binary, Rockwell binary, Garmin binary format, or other vendor binary protocols. gpsd takes this information from the GPS and translates it into something uniform and easier to understand for clients. This package contains the libgps library. |
|
libhavege |
1.9.18-2 |
Library for haveged |
|
libhiredis |
1.2.0-1 |
Hiredis is a minimalistic C client library for the Redis database. |
|
libhttp-parser |
2.9.4-1 |
A parser for HTTP messages written in C. It parses both requests and responses. The parser is designed to be used in performance HTTP applications. It does not make any syscalls nor allocations, it does not buffer data, it can be interrupted at anytime. Depending on your architecture, it only requires about 40 bytes of data per message stream (in a web server that is per connection). |
|
libi2c |
4.3-3 |
This package contains i2c functionality needed by i2c-tools. |
|
libical |
3.0.9-3 |
Libical is an Open Source implementation of the iCalendar protocols and protocol data units. The iCalendar specification describes how calendar clients can communicate with calendar servers so users can store their calendar data and arrange meetings with other users. Libical implements RFC2445, RFC2446 and some of RFC2447. |
|
libiconv-full |
1.17-1 |
Character set conversion library |
|
libid3tag |
0.16.3-1 |
libid3tag is a library for reading and (eventually) writing ID3 tags, both ID3v1 and the various versions of ID3v2. |
|
libidn |
1.42-1 |
GNU Libidn is a fully documented implementation of the Stringprep, Punycode and IDNA specifications. Libidn's purpose is to encode and decode internationalized domain names. Library only package |
|
libidn2 |
2.3.7-1 |
Libidn2 is a free software implementation of IDNA2008, Punycode and TR46 in library form. It contains functionality to convert internationalized domain names to and from ASCII Compatible Encoding (ACE), following the IDNA2008 and TR46 standards. Library only package |
|
libiksemel |
1.4-2 |
Iksemel is an XML parser library mainly designed for Jabber applications. It provides SAX, DOM, and special Jabber stream APIs. Library is coded in ANSI C except the network code (which is POSIX compatible), thus highly portable. |
|
libinih |
r58-1 |
inih (INI Not Invented Here) is a simple .INI file parser written in C. It's only a couple of pages of code, and it was designed to be small and simple, so it's good for embedded systems. It's also more or less compatible with Python's ConfigParser style of .INI files, including RFC 822-style multi-line syntax and name: value entries. |
|
libinireader |
r58-1 |
inih (INI Not Invented Here) is a simple .INI file parser written in C. It's only a couple of pages of code, and it was designed to be small and simple, so it's good for embedded systems. It's also more or less compatible with Python's ConfigParser style of .INI files, including RFC 822-style multi-line syntax and name: value entries. |
|
libinklevel |
0.9.5-1 |
Libinklevel is a library for checking the ink level of your printer on a system which runs Linux. |
|
libinotifytools |
4.23.9.0-2 |
inotify-tools is a C library and a set of command-line programs for Linux providing a simple interface to inotify. These programs can be used to monitor and act upon filesystem events. A more detailed description of the programs is further down the page. The programs are written in C and have no dependencies other than a Linux kernel supporting inotify. This package provides the libinotifytools shared library. |
|
libintl-full |
0.22.5-1 |
GNU Internationalization library |
|
libiperf3 |
3.17.1-2 |
Libiperf is a library providing an API for iperf3 functionality. |
|
libipset |
7.21-1 |
IPset administration utility |
|
libjbig |
2.1-1 |
JBIG1 data compression library |
|
libjose |
11-6 |
libjose is a library for performing various tasks on JSON Object Signing and Encryption (JOSE) objects. José provides a full crypto stack including key generation, signing and encryption. |
|
libjpeg-turbo |
3.0.3-1 |
libjpeg-turbo is a speed focused fork of libjpeg. |
|
libjpeg-turbo-utils |
3.0.3-1 |
These are the JPEG utilities that come with libjpeg-turbo. |
|
libjson-c |
0.17-1 |
This package contains a library for javascript object notation backends. |
|
libjson-script |
2024.03.29~eb9bcb64-1 |
Minimalistic JSON based scripting engine |
|
libjwt |
1.17.1-1 |
JSON Web Tokens are an open, industry standard RFC 7519 method for representing claims securely between two parties. libjwt seems to be the most popular implementation written in C. |
|
libkeyutils |
1.6.3-2 |
Key utilities library |
|
libkmod |
32-1 |
Linux kernel module handling (library) |
|
libksba |
1.6.4-1 |
Libksba is a library to make the tasks of working with X.509 certificates, CMS data and related objects more easy. |
|
libldns |
1.8.3-1 |
The goal of ldns is to simplify DNS programming, it supports recent RFCs like the DNSSEC documents, and allows developers to easily create software conforming to current RFCs, and experimental software for current Internet Drafts. |
|
libleptonica |
1.84.1-1 |
A library for efficient image processing and image analysis operations |
|
libltdl |
2.4.7-1 |
A generic dynamic object loading library |
|
liblua |
5.1.5-11 |
Lua is a powerful light-weight programming language designed for extending applications. Lua is also frequently used as a general-purpose, stand-alone language. Lua is free software. This package contains the Lua shared libraries, needed by other programs. |
|
liblua5.3 |
5.3.5-6 |
Lua is a powerful, efficient, lightweight, embeddable scripting language. It supports procedural programming, object-oriented programming, functional programming, data-driven programming, and data description. This package contains the Lua shared libraries, needed by other programs. |
|
liblz4 |
1.9.4-1 |
LZ4 is a compression codec that features a very fast encoder and an even faster decoder. This package provides the liblz4 shared library. |
|
liblzma |
5.4.6-1 |
liblzma library from XZ Utils |
|
liblzo |
2.10-4 |
LZO is a data compression library which is suitable for data de-/compression in real-time. This means it favours speed over compression ratio. |
|
libmad |
0.16.4-2 |
MAD is a high-quality MPEG audio decoder. It currently supports MPEG-1 and the MPEG-2 extension to lower sampling frequencies, as well as the de facto MPEG 2.5 format. All three audio layers - Layer I, Layer II, and Layer III (i.e. MP3) - are fully implemented. |
|
libmagic |
5.45-1 |
File type determination library |
|
libmariadb |
3.1.23-1 |
MariaDB is a very fast and robust SQL database server. This package includes the client library. |
|
libmariadb-plugin-auth-gssapi-client |
3.1.23-1 |
MariaDB is a very fast and robust SQL database server. This package provides the auth_gssapi_client plugin. |
|
libmariadb-plugin-remote-io |
3.1.23-1 |
MariaDB is a very fast and robust SQL database server. This package provides the remote_io plugin. |
|
libmaxminddb |
1.9.1-1 |
The libmaxminddb library provides functions for working MaxMind DB files. |
|
libmbedtls |
3.6.0-1 |
The aim of the mbedtls project is to provide a quality, open-source cryptographic library written in C and targeted at embedded systems. This package contains the mbedtls library. |
|
libmbim |
1.30.0-2 |
Helper library to talk to MBIM enabled modems. Add mbim-utils for extra utilities. |
|
libmcrypt |
2.5.8-2 |
libmcrypt is a cryptographic library that conveniently brings together a variety of ciphers for convenient use. |
|
libmediainfo |
24.06-1 |
LibediaInfo is a convenient unified display of the most relevant technical and tag data for video and audio files. |
|
libmicrohttpd-ssl |
0.9.77-1 |
GNU libmicrohttpd is a library that runs an HTTP server. with SSL support |
|
libmilter-sendmail |
8.16.1-1 |
The sendmail Mail Filter API (Milter) is designed to allow third-party programs access to mail messages as they are being processed in order to filter meta-information and content. |
|
libminiupnpc |
2.2.8-1 |
Lightweight UPnP library |
|
libmms |
0.6.4-4 |
LibMMS is a common library for parsing mms:// and mmsh:// type network streams. These are commonly used to stream Windows Media Video content over the web. LibMMS itself is only for receiving MMS stream, it doesn't handle sending at all. |
|
libmnl |
1.0.5-1 |
libmnl is a minimalistic user-space library oriented to Netlink developers. There are a lot of common tasks in parsing, validating, constructing of both the Netlink header and TLVs that are repetitive and easy to get wrong. This library aims to provide simple helpers that allows you to re-use code and to avoid re-inventing the wheel. The main features of this library are: . * Small: the shared library requires around 30KB for an x86-based computer. . * Simple: this library avoids complexity and elaborated abstractions that tend to hide Netlink details. . * Easy to use: the library simplifies the work for Netlink-wise developers. It provides functions to make socket handling, message building, validating, parsing and sequence tracking, easier. . * Easy to re-use: you can use the library to build your own abstraction layer on top of this library. . * Decoupling: the interdependency of the main bricks that compose the library is reduced, i.e. the library provides many helpers, but the programmer is not forced to use them. |
|
libmodbus |
3.1.8-1 |
A Modbus library for Linux, Mac OS X, FreeBSD, QNX and Win32. |
|
libmosquitto-nossl |
2.0.18-3 |
Library required for mosquitto's command line client tools, also for use by any third party software that wants to communicate with _any_ MQTT server. Should be useable for communicating with any MQTT v3.1/3.1.1/5 compatible server, in addition to Mosquitto. This package is built without SSL support |
|
libmosquitto-ssl |
2.0.18-3 |
Library required for mosquitto's command line client tools, also for use by any third party software that wants to communicate with _any_ MQTT server. Should be useable for communicating with any MQTT v3.1/3.1.1/5 compatible server, in addition to Mosquitto. This package is built with SSL support |
|
libmount |
2.40.1-1 |
The libmount library is used to parse /etc/fstab, /etc/mtab and /proc/self/mountinfo files, manage the mtab file, evaluate mount options... |
|
libmpdclient |
2.22-1 |
A stable, documented, asynchronous API library for interfacing MPD in the C, C++ & Objective C languages. |
|
libmpfr |
4.2.1-1 |
MPFR is a portable library written in C for arbitrary precision arithmetic on floating-point numbers. It is based on the GNU MP library. It aims to provide a class of floating-point numbers with precise semantics. |
|
libmpg123 |
1.32.6-1 |
fast console mpeg audio decoder library |
|
libmtp |
1.1.21-1 |
libmtp implements an MTP initiator, which means it initiate MTP sessions with devices. The devices responding are known as MTP responders. libmtp runs on something with a USB host controller interface, using libusb to access the host controller. |
|
libmtp-utils |
1.1.21-1 |
nfs-ls, nfs-cat, nfs-cp console usersapce utilities for accessing NFS shares over a network. |
|
libnatpmp |
20230423-1 |
libnatpmp is an attempt to make a portable and fully compliant implementation of the protocol for the client side. It is based on non blocking sockets and all calls of the API are asynchronous. It is therefore very easy to integrate the NAT-PMP code to any event driven code. This package contains the shared library. |
|
libncurses |
6.4-3 |
Terminal handling library |
|
libncurses-dev |
6.4-3 |
Development files for the ncurses library |
|
libncursesw |
6.4-3 |
Terminal handling library (Unicode) |
|
libndm |
|
.15-1 |
|
libndpi |
4.8-1 |
nDPI is an open source LGPLv3 library for deep-packet inspection. Based on OpenDPI it includes ntop extensions. |
|
libneon |
0.32.4-1 |
neon is an HTTP and WebDAV client library, with a C interface. Features: - High-level wrappers for common HTTP and WebDAV operations (GET, MOVE, DELETE, etc) - Low-level interface to the HTTP request/response engine, allowing the use of arbitrary HTTP methods, headers, etc. - Authentication support including Basic and Digest support, along with GSSAPI-based Negotiate on Unix, and SSPI-based Negotiate/NTLM on Win32 - SSL/TLS support using OpenSSL or GnuTLS; exposing an abstraction layer for verifying server certificates, handling client certificates, and examining certificate properties. Smartcard-based client certificates are also supported via a PKCS11 wrapper interface. - Abstract interface to parsing XML using libxml2 or expat, and wrappers for simplifying handling XML HTTP response bodies - WebDAV metadata support; wrappers for PROPFIND and PROPPATCH to simplify property manipulation. |
|
libnet-1.2.x |
1.2-rc3-4 |
Low-level packet creation library |
|
libnetfilter-acct |
1.0.3-2 |
libnetfilter_acct is a userspace library providing a programming interface (API) to the extended accounting infrastructure. |
|
libnetfilter-conntrack |
1.0.9-2 |
libnetfilter_conntrack is a userspace library providing a programming interface (API) to the in-kernel connection tracking state table. The library libnetfilter_conntrack has been previously known as libnfnetlink_conntrack and libctnetlink. This library is currently used by conntrack-tools among many other applications. |
|
libnetfilter-cthelper |
1.0.0-2 |
libnetfilter_cthelper is a userspace library providing a programming interface (API) to the in-kernel connection tracking helpers. This library is currently used by conntrack-tools. |
|
libnetfilter-cttimeout |
1.0.0-2 |
libnetfilter_cttimeout is a userspace library providing a programming interface (API) to the in-kernel connection tracking timeout handling. This library is currently used by conntrack-tools. |
|
libnetfilter-log |
1.0.2-1a |
libnetfilter_log is a userspace library providing interface to packets that have been logged by the kernel packet filter. It is is part of a system that deprecates the old syslog/dmesg based packet logging. This library has been previously known as libnfnetlink_log. |
|
libnetfilter-queue |
1.0.5-4 |
libnetfilter_queue is a userspace library providing a programming interface (API) to packets that have been queued by the kernel packet filter. |
|
libnetsnmp |
5.9.4-2 |
Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains shared libraries, needed by other programs. |
|
libnettle |
3.9.1-1 |
GNU crypto library |
|
libnewt |
0.52.24-1 |
Newt is a programming library for color text mode, widget based user interfaces. Newt can be used to add stacked windows, entry widgets, checkboxes, radio buttons, labels, plain text fields, scrollbars, etc., to text mode user interfaces. Newt is based on the slang library. |
|
libnfnetlink |
1.0.2-1 |
libnfnetlink is is the low-level library for netfilter related kernel/userspace communication. It provides a generic messaging infrastructure for in-kernel netfilter subsystems (such as nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their respective users and/or management tools in userspace. |
|
libnfs |
5.0.3-1 |
LIBNFS is a client library for accessing NFS shares over a network. |
|
libnfs-utils |
5.0.3-1 |
nfs-ls, nfs-cat, nfs-cp console usersapce utilities for accessing NFS shares over a network. |
|
libnftnl |
1.2.6-1 |
libnftnl is a userspace library providing a low-level netlink programming interface (API) to the in-kernel nf_tables subsystem. |
|
libnghttp2 |
1.62.1-1 |
C library implementing the framing layer of the HTTP/2 protocol. It can be used to build a HTTP/2-capable HTTP client or server |
|
libnl |
3.9.0-1 |
Socket handling, connection management, sending and receiving of data, message construction and parsing, object caching system, etc. |
|
libnl-cli |
3.9.0-1 |
CLI Netlink Library Functions |
|
libnl-core |
3.9.0-1 |
Common code for all netlink libraries |
|
libnl-genl |
3.9.0-1 |
Generic Netlink Library Functions |
|
libnl-nf |
3.9.0-1 |
Netfilter Netlink Library Functions |
|
libnl-route |
3.9.0-1 |
Routing Netlink Library Functions |
|
libnl-tiny |
2023.12.05~965c4bf4-1 |
This package contains a stripped down version of libnl |
|
libnpth |
1.6-1 |
nPth is a library to provide the GNU Pth API and thus a non-preemptive threads implementation. |
|
libnpupnp |
6.1.3-1 |
npupnp (new pupnp or not pupnp ?) is an UPnP library derived from the venerable pupnp (https://github.com/pupnp/pupnp), based on its 1.6.x branch (around 1.6.25). |
|
libnss-mdns |
0.15.1-1 |
nss-mdns is a plugin for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc) providing host name resolution via Multicast DNS (aka Zeroconf, aka Apple Rendezvous, aka Apple Bonjour), effectively allowing name resolution by common Unix/Linux programs in the ad-hoc mDNS domain .local. |
|
libodbc |
2.3.12-3 |
unixODBC is an Open Source ODBC sub-system and an ODBC SDK for Linux, Mac OSX, and UNIX. This package provides the unixODBC Driver Manager library. |
|
libodbccr |
2.3.12-3 |
unixODBC is an Open Source ODBC sub-system and an ODBC SDK for Linux, Mac OSX, and UNIX. This package provides the unixODBC Cursor library. |
|
libodbcinst |
2.3.12-3 |
unixODBC is an Open Source ODBC sub-system and an ODBC SDK for Linux, Mac OSX, and UNIX. This package provides the unixODBC Configuration library. |
|
libogg |
1.3.5-1 |
Ogg project codecs use the Ogg bitstream format to arrange the raw, compressed bitstream into a more robust, useful form. For example, the Ogg bitstream makes seeking, time stamping and error recovery possible, as well as mixing several sepearate, concurrent media streams into a single physical bitstream. |
|
libopcodes |
2.42-1 |
libopcodes |
|
libopendkim |
2.10.3-6 |
Library for signing and verifying DomainKeys Identified Mail (DKIM) signatures. |
|
libopenldap |
2.6.8-2 |
OpenLDAP Software is an open source implementation of the Lightweight Directory Access Protocol (LDAP). This package contains the shared LDAP client libraries, needed by other programs. |
|
libopenssl |
3.0.14-2 |
The OpenSSL Project is a collaborative effort to develop a robust, commercial-grade, full-featured, and Open Source toolkit implementing the Transport Layer Security (TLS) protocol as well as a full-strength general-purpose cryptography library. This package contains the OpenSSL shared libraries, needed by other programs. |
|
libopenssl-conf |
3.0.14-2 |
The OpenSSL Project is a collaborative effort to develop a robust, commercial-grade, full-featured, and Open Source toolkit implementing the Transport Layer Security (TLS) protocol as well as a full-strength general-purpose cryptography library. This package installs the OpenSSL configuration file /opt/etc/ssl/openssl.cnf. |
|
libopenssl-legacy |
3.0.14-2 |
The OpenSSL legacy provider supplies OpenSSL implementations of algorithms that have been deemed legacy. Such algorithms have commonly fallen out of use, have been deemed insecure by the cryptography community, or something similar. See https://www.openssl.org/docs/man3.0/man7/OSSL_PROVIDER-legacy.html |
|
liboping |
1.10.0-3 |
C library to generate ICMP echo requests. |
|
libopus |
1.5.2-1 |
Opus is a totally open, royalty-free, highly versatile audio codec. Opus is unmatched for interactive speech and music transmission over the Internet, but is also intended for storage and streaming applications. |
|
libopusenc |
0.2.1-1 |
OPUS Audio stream files |
|
libopusfile |
0.12-2 |
The opusfile library provides seeking, decode, and playback of Opus streams in the Ogg container (.opus files) |
|
libosip2 |
5.3.1-1 |
GNU oSIP library, a Session Initiation Protocol (SIP) implementation. |
|
libotr |
4.1.1-2 |
Off-the-Record (OTR) Messaging allows you to have private conversations over instant messaging. |
|
libout123 |
1.32.6-1 |
Library for continuous playback of audio streams via various platform-specific output methods |
|
libow |
3.2p4-2 |
OWFS is a suite of programs that designed to make the 1-wire bus and its devices easily accessible. The underlying principle is to create a virtual filesystem, with the unique ID being the directory, and the individual properties of the device are represented as simple files that can be read and written. Details of the individual slave or master design are hidden behind a consistent interface. The goal is to provide an easy set of tools for a software designer to create monitoring or control applications. There are some performance enhancements in the implementation, including data caching, parallel access to bus masters, and aggregation of device communication. Still the fundemental goal has been ease of use, flexibility and correctness rather than speed. This package contains the OWFS library. |
|
libpagekite |
0.91.201110C-2 |
PageKite is a system for running publicly visible servers (generally web servers) on machines without a direct connection to the Internet, such as mobile devices or computers behind restrictive firewalls. PageKite works around NAT, firewalls and IP-address limitations by using a combination of tunnels and reverse proxies. This package provides an implementation of the PageKite Protocol in C, optimized for high-performance or embedded applications. This package contains the core library |
|
libpam |
1.5.2-1a |
The Linux-PAM Pluggable Authentication Modules. |
|
libparted |
3.6-1 |
GNU Parted shared library |
|
libpcap |
1.10.4-1 |
This package contains a system-independent library for user-level network packet capture. |
|
libpci |
3.12.0-2 |
Linux PCI Libraries |
|
libpcre |
8.45-5 |
A Perl Compatible Regular Expression library |
|
libpcre2 |
10.42-1 |
A Perl Compatible Regular Expression library |
|
libpcre2-32 |
10.42-1 |
A Perl Compatible Regular Expression library (32bit support) |
|
libpcsclite |
2.2.3-2 |
The purpose of PC/SC Lite is to provide a Windows(R) SCard interface in a very small form factor for communicating to smart cards and smart cards readers. . This package contains the PC/SC shared library. |
|
libpipeline |
1.5.3-1 |
libpipeline is a C library for setting up and running pipelines of processes. |
|
libpj |
2.14.1-1 |
libpj library |
|
libpjlib-util |
2.14.1-1 |
libpjlib-util library |
|
libpjmedia |
2.14.1-1 |
libpjmedia library |
|
libpjnath |
2.14.1-1 |
libpjnath library |
|
libpjsip |
2.14.1-1 |
libpjsip library |
|
libpjsip-simple |
2.14.1-1 |
libpjsip-simple library |
|
libpjsip-ua |
2.14.1-1 |
libpjsip-ua library |
|
libpjsua |
2.14.1-1 |
libpjsua library |
|
libpjsua2 |
2.14.1-1 |
libpjsua2 library |
|
libplist |
2.4.0-1 |
A library to handle Apple Property List format whereas it's binary or XML |
|
libpng |
1.6.43-1 |
A PNG format files handling library |
|
libpoppler |
21.08.0-5 |
Poppler is a PDF rendering library based on the xpdf-3.0. |
|
libpopt |
1.19-1 |
A command line option parsing library |
|
libpq |
15.6-1 |
PostgreSQL client library. |
|
libprotobuf-c |
1.4.1-1 |
Runtime library to use Google Protocol Buffers from C applications. Protocol Buffers are a way of encoding structured data in an efficient yet extensible format. Google uses Protocol Buffers for almost all of its internal RPC protocols and file formats. |
|
libpsl |
0.21.5-1 |
C library to handle the Public Suffix List |
|
libpthread |
2.27-11 |
POSIX thread library |
|
libpython3 |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains only core Python library. |
|
libqmi |
1.34.0-2 |
Helper library talk to QMI enabled modems. Add qmi-utils for extra utilities. |
|
libqrencode |
4.1.1-1 |
Libqrencode is a C library for encoding data in a QR Code symbol, a kind of 2D symbology that can be scanned by handy terminals such as a mobile phone with CCD. The capacity of QR Code is up to 7000 digits or 4000 characters, and is highly robust. |
|
libradcli |
1.3.0-1 |
A library for radius clients |
|
libreadline |
8.2-1 |
The Readline library provides a set of functions for use by applications that allow users to edit command lines as they are typed in. Both Emacs and vi editing modes are available. The Readline library includes additional functions to maintain a list of previously-entered command lines, to recall and perhaps reedit those lines, and perform csh-like history expansion on previous commands. |
|
librrd |
1.2.30-3a |
Round Robin Database (RRD) management library (v1.2.x) |
|
librrd1 |
1.0.50-6 |
RRD is the Acronym for Round Robin Database. RRD is a system to store and display time-series data (i.e. network bandwidth, machine-room temperature, server load average). It stores the data in a very compact way that will not expand over time, and it presents useful graphs by processing the data to enforce a certain data density. It can be used either via simple wrapper scripts (from shell or Perl) or via frontends that poll network devices and put friendly user interface on it. This is version 1.0.x with cgilib-0.4, gd1.3 and libpng-1.0.9 linked into librrd.so. The library is much smaller compared to the 1.2.x version with separate dynamic linked libraries. This package contains a shared library, used by other programs. |
|
librsync |
2.3.4-1 |
librsync implements the rolling-checksum algorithm of remote file synchronization that was popularized by the rsync utility and is used in rproxy. This algorithm transfers the differences between 2 files without needing both files on the same system. |
|
librt |
2.27-11 |
POSIX.1b RealTime extension library |
|
librtlsdr |
2.0.1-1 |
rtl-sdr allows DVB-T dongles based on the Realtek RTL2832U to be used as an inexpensive SDR. This package contains the librtlsdr shared library. |
|
librtmp |
2.4-20210219-1 |
librtmp is a RTMPDump Real-Time Messaging Protocol API. |
|
libruby |
3.3.3-1 |
Ruby scripting language (shared library) |
|
libsasl2 |
2.1.28-3 |
A general purpose authentication library (libraries) |
|
libsasl2-sasldb |
2.1.28-3 |
A general purpose authentication library (sasldb libraries) |
|
libsasl2-utils |
2.1.28-3 |
A general purpose authentication library (sasldb utilities) |
|
libsensors |
3.6.0-1 |
lm-sensors libraries |
|
libserf |
1.3.10-2 |
The serf library is a high performance C-based HTTP client library built upon the Apache Portable Runtime (APR) library. It is permissively licensed under the Apache License, v2. Key features: multiplexed, asynchronous connections SSL/TLS support full HTTP pipelining multiple authentication modes (Basic, Digest, Kerberos/NTLM) zero-copy support for increased throughput Serf is the default client library of Apache Subversion and Apache OpenOffice |
|
libshout |
2.4.6-2 |
libshout allows applications to easily communicate and broadcast to an Icecast streaming media server. It handles the socket connections, metadata communication, and data streaming for the calling application, and lets developers focus on feature sets instead of implementation details. . This package does not have Theora support. |
|
libsispmctl |
4.8-1 |
Silver Shield PM Control for Linux library |
|
libslang2 |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. |
|
libslang2-mod-base64 |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the base64 module. |
|
libslang2-mod-chksum |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the chksum module. |
|
libslang2-mod-csv |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the csv module. |
|
libslang2-mod-fcntl |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the fcntl module. |
|
libslang2-mod-fork |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the fork module. |
|
libslang2-mod-histogram |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the histogram module. |
|
libslang2-mod-iconv |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the iconv module. |
|
libslang2-mod-json |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the json module. |
|
libslang2-mod-onig |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the onig module. |
|
libslang2-mod-png |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the png module. |
|
libslang2-mod-rand |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the rand module. |
|
libslang2-mod-select |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the select module. |
|
libslang2-mod-slsmg |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the slsmg module. |
|
libslang2-mod-socket |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the socket module. |
|
libslang2-mod-stats |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the stats module. |
|
libslang2-mod-sysconf |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the sysconf module. |
|
libslang2-mod-termios |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the termios module. |
|
libslang2-mod-varray |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the varray module. |
|
libslang2-mod-zlib |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package contains the zlib module. |
|
libslang2-modules |
2.3.3-2 |
Multi-platform programmer's library providing facilities for interactive applications. Includes such things as display/screen management, keyboard input, keymaps, etc. Includes the embeddable S-Lang interpreter. This package installs all of S-Lang's bundled modules. |
|
libsmartcols |
2.40.1-1 |
The smartcols library is used to print tables and trees in a pretty way. |
|
libsndfile |
1.2.2-1 |
libsndfile is a library of C routines for reading and writing files containing sampled audio data. |
|
libsodium |
1.0.19-1 |
NaCl (pronounced "salt") is a new easy-to-use high-speed software library for network communication, encryption, decryption, signatures, etc. NaCl's goal is to provide all of the core operations needed to build higher-level cryptographic tools. Sodium is a portable, cross-compilable, installable, packageable fork of NaCl (based on the latest released upstream version nacl-20110221), with a compatible API. The design choices, particularly in regard to the Curve25519 Diffie-Hellman function, emphasize security (whereas NIST curves emphasize "performance" at the cost of security), and "magic constants" in NaCl/Sodium have clear rationales. The same cannot be said of NIST curves, where the specific origins of certain constants are not described by the standards. And despite the emphasis on higher security, primitives are faster across-the-board than most implementations of the NIST standards. |
|
libsoup3 |
3.4.4-1 |
libsoup3 |
|
libsoxr |
0.1.3-2 |
The SoX Resampler library High quality, one-dimensional sample-rate conversion library |
|
libspandsp |
0.0.6-4 |
spandsp library |
|
libspeexdsp |
1.2.0-2 |
Open source patent-free speech compression codec library. Speex is an Open Source/Free Software patent-free audio compression format designed for speech. The Speex Project aims to lower the barrier of entry for voice applications by providing a free alternative to expensive proprietary speech codecs. Moreover, Speex is well-adapted to Internet applications and provides useful features that are not present in most other codecs. This package contains the shared dsp library, needed by other programs. |
|
libsqlite3 |
3410200-1 |
SQLite is a small C library that implements a self-contained, embeddable, zero-configuration SQL database engine. This package contains the SQLite (v3.x) shared library, used by other programs. |
|
libsrtp2 |
2.6.0-1 |
Open-source implementation of the Secure Real-time Transport Protocol (SRTP) originally authored by Cisco Systems, Inc. It is available under a BSD-style license. |
|
libss |
1.47.0-2 |
This pacakge contains libss, a command-line interface parsing library bundled with e2fsprogs. |
|
libssh |
0.10.6-2 |
libssh is a mulitplatform C library implementing the SSHv2 and SSHv1 protocol for client and server implementations. |
|
libssh2 |
1.11.0-1 |
libssh2 is a client-side C library implementing the SSH2 protocol. |
|
libssp |
8.4.0-11 |
GCC support library |
|
libstdcpp |
8.4.0-11 |
GNU Standard C++ Library v3 |
|
libsyn123 |
1.32.6-1 |
Library for signal generation and format conversion |
|
libsysfs |
2.1.0-4a |
The library's purpose is to provide a consistant and stable interface for querying system device information exposed through sysfs. |
|
libtalloc |
2.4.2-1 |
talloc is a hierarchical, reference counted memory pool system with destructors. |
|
libtasn1 |
4.19.0-2 |
This is a library for Abstract Syntax Notation One (ASN.1) and Distinguish Encoding Rules (DER) manipulation. |
|
libtheora |
1.1.1-1 |
Theora is Xiph.Org's first publicly released video codec, intended for use within the Foundation's Ogg multimedia streaming system. Theora is derived directly from On2's VP3 codec; Currently the encoders are nearly identical, but Theora will make use of new features supported by the decoder to improve over what is is possible with VP3. |
|
libthread-db |
2.27-11 |
POSIX thread library debugging support |
|
libtiff |
4.6.0-1 |
TIFF library |
|
libtirpc |
1.3.4-1 |
Library TI RPC for RPC bindings |
|
libtool-bin |
2.4.6-3 |
GNU libtool is a generic library support script. Libtool hides the complexity of using shared libraries behind a consistent, portable interface. This package contains the libtoolize executable. |
|
libtorrent-rasterbar |
2.0.9-2 |
Rasterbar libtorrent is a C++ library that aims to be a good alternative to all the other bittorrent implementations around. |
|
libubox |
2024.03.29~eb9bcb64-1 |
Basic utility library |
|
libucl |
1.03-3 |
UCL is a portable lossless data compression library written in ANSI C. UCL implements a number of compression algorithms that achieve an excellent compression ratio while allowing *very* fast decompression. Decompression requires no additional memory. |
|
libucsi |
r3d43b280298c-2 |
Linux DVB API applications and utilities. . This package contains the Linux DVB ucsi library. |
|
libudev-zero |
1.0.3-1 |
Drop-in replacement for libudev |
|
libuecc |
7-2 |
Very small Elliptic Curve Cryptography library |
|
libugpio |
0.0.7-1 |
libugpio is a library to ease the use of linux kernel's sysfs gpio interface from C programs and/or other libraries. |
|
libunbound |
1.20.0-1 |
This package contains the Unbound library including 'libevent', 'libmnl', and 'libpthread' to better handle large networks with heavy query loads. Options are available to custom trim Unbound for smaller targets. |
|
libunistring |
1.1-1 |
This library provides functions for manipulating Unicode strings and for manipulating C strings according to the Unicode standard. |
|
libunrar |
7.0.9-1 |
UnRAR library is a shared library that provides file extraction from RAR archives |
|
libupnp |
1.14.18-1 |
The portable SDK for UPnP Devices (libupnp) provides developers with an API and open source code for building control points, devices, and bridges that are compliant with Version 1.0 of the Universal Plug and Play Device Architecture Specification. |
|
libupnp-sample |
1.14.18-1 |
TVcontrolpoint & tvdevice sample applications run inside /opt/etc/upnp-tvdevice/ |
|
libupnpp |
0.26.5-1 |
libupnpp defines useful objects over libupnp and can be used to create both devices and control points. It is shared by upmpdcli and upplay. |
|
liburcu |
0.14.0-1 |
Userspace Read-Copy-Update library. |
|
libusb-1.0 |
1.0.26-3 |
libusb is a C library that gives applications easy access to USB devices on many different operating systems. |
|
libusb-compat |
0.1.8-1 |
libusb is a C library that gives applications easy access to USB devices on many different operating systems. |
|
libutp |
2023.02.14~c95738b1-1 |
The uTorrent Transport Protocol library |
|
libuuid |
2.40.1-1 |
The UUID library is used to generate unique identifiers for objects that may be accessible beyond the local system. This library generates UUIDs compatible with those created by the Open Software Foundation (OSF) Distributed Computing Environment (DCE) utility. |
|
libuv |
1.48.0-1 |
libuv is a multi-platform support library with a focus on asynchronous I/O. It was primarily developed for use by Node.js, but it's also used by Luvit, Julia, pyuv, and others. |
|
libv4l |
1.26.1-2 |
libv4l is a collection of libraries which adds a thin abstraction layer on top of video4linux2 devices. The purpose of this (thin) layer is to make it easy for application writers to support a wide variety of devices without having to write separate code for different devices in the same class. libv4l consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2. libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent of the drivers for those devices supporting v4l1 compatibility (which many v4l2 drivers do not). libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the application transparent libv4lconvert conversion where necessary. |
|
libvorbis |
1.3.7-2 |
Vorbis is a general purpose audio and music encoding format contemporary to MPEG-4's AAC and TwinVQ, the next generation beyond MPEG audio layer 3. Unlike the MPEG sponsored formats (and other proprietary formats such as RealAudio G2 and Windows' flavor of the month), the Vorbis CODEC specification belongs to the public domain. All the technical details are published and documented, and any software entity may make full use of the format without license fee, royalty or patent concerns. |
|
libvorbisidec |
1.0.3-20180319-2 |
libvorbisidec is "tremor", a fixed-point implementation of libvorbis. It is suitable as a replacement for libvorbis in tremor-aware applications. Tremor is a decoder only. |
|
libwebp |
1.4.0-1 |
The libwebp package contains a library for the WebP format. |
|
libwebsockets-full |
4.3.3-1 |
libwebsockets (Full - OpenSSL, libuv, plugins, CGI) |
|
libwebsockets-openssl |
4.3.3-1 |
libwebsockets (OpenSSL) |
|
libwolfssl |
5.7.0-stable-1 |
wolfSSL (formerly CyaSSL) is an SSL library optimized for small footprint, both on disk and for memory use. |
|
libwrap |
7.6-4 |
Security wrapper library for TCP services |
|
libwxbase |
2.8.12-1 |
wxBase contains most of the non-GUI classes from the wxWindows cross- -platform C++ framework. There are 2 categories: generally useful portable code (date/time handling, command line parsing, regular expression support) and wrappers for the OS objects (files, directories, sockets, threads, etc.) allowing you to write portable programs easily. |
|
libx264 |
2024-01-13-1 |
x264 is a free software library for encoding video streams into the H.264/MPEG-4 AVC compression format. |
|
libxml2 |
2.12.6-1 |
A library for manipulating XML and HTML resources. |
|
libxml2-dev |
2.12.6-1 |
A library for manipulating XML and HTML resources. This package contains the headers and xml2-config binary. |
|
libxml2-utils |
2.12.6-1 |
This package contains the binaries xmllint and xmlcatalog from libxml2, a library for manipulating XML and HTML resources. |
|
libxslt |
1.1.39-1 |
A library for XML transformation using XSLT. |
|
libxxhash |
0.8.2-2 |
xxHash is an Extremely fast Hash algorithm, running at RAM speed limits. It successfully completes the SMHasher test suite which evaluates collision, dispersion and randomness qualities of hash functions. Code is highly portable, and hashes are identical on all platforms (little / big endian). This package contains the shared library. |
|
libyaml |
0.2.5-1 |
Fast YAML 1.1 parser and emitter library |
|
libyubikey |
1.13-2 |
The c library for the yubikey from Yubico |
|
libzen |
0.4.41-1 |
Small C++ derivate classes to have an easier life. |
|
libzip-gnutls |
1.10.1-1 |
A C library for reading, creating, and modifying zip archives. |
|
libzmq-nc |
4.3.5-1 |
This package contains the ZeroMQ messaging engine shared library. |
|
libzstd |
1.5.6-1 |
Zstandard - Fast real-time compression algorithm. This package provides libzstd library. |
|
lighttpd |
1.4.76-2 |
A flexible and lightweight web server |
|
lighttpd-mod-access |
1.4.76-2 |
Access restrictions module |
|
lighttpd-mod-accesslog |
1.4.76-2 |
Access logging module |
|
lighttpd-mod-alias |
1.4.76-2 |
Directory alias module |
|
lighttpd-mod-auth |
1.4.76-2 |
Authentication module |
|
lighttpd-mod-authn_file |
1.4.76-2 |
File-based authentication module |
|
lighttpd-mod-authn_ldap |
1.4.76-2 |
LDAP-based authentication module |
|
lighttpd-mod-cgi |
1.4.76-2 |
CGI module |
|
lighttpd-mod-deflate |
1.4.76-2 |
Compress dynamic output module |
|
lighttpd-mod-evhost |
1.4.76-2 |
Enhanced Virtual-Hosting module |
|
lighttpd-mod-expire |
1.4.76-2 |
Expire module |
|
lighttpd-mod-extforward |
1.4.76-2 |
Extract client module |
|
lighttpd-mod-fastcgi |
1.4.76-2 |
FastCGI module |
|
lighttpd-mod-magnet |
1.4.76-2 |
Magnet module |
|
lighttpd-mod-maxminddb |
1.4.76-2 |
MaxMind DB module |
|
lighttpd-mod-openssl |
1.4.76-2 |
TLS using openssl module |
|
lighttpd-mod-proxy |
1.4.76-2 |
Proxy module |
|
lighttpd-mod-redirect |
1.4.76-2 |
URL redirection module |
|
lighttpd-mod-rewrite |
1.4.76-2 |
URL rewriting module |
|
lighttpd-mod-rrdtool |
1.4.76-2 |
RRDtool module |
|
lighttpd-mod-scgi |
1.4.76-2 |
SCGI module |
|
lighttpd-mod-setenv |
1.4.76-2 |
Environment variable setting module |
|
lighttpd-mod-simple_vhost |
1.4.76-2 |
Simple virtual hosting module |
|
lighttpd-mod-sockproxy |
1.4.76-2 |
sockproxy module |
|
lighttpd-mod-ssi |
1.4.76-2 |
SSI module |
|
lighttpd-mod-status |
1.4.76-2 |
Server status display module |
|
lighttpd-mod-userdir |
1.4.76-2 |
User directory module |
|
lighttpd-mod-vhostdb |
1.4.76-2 |
Virtual Host Database module |
|
lighttpd-mod-webdav |
1.4.76-2 |
WebDAV module |
|
lighttpd-mod-wstunnel |
1.4.76-2 |
Websocket tunneling module |
|
limitcpu |
3.1-1 |
LimitCPU is a program to throttle the CPU cycles used by other applications. It will monitor a process and make sure its CPU usage stays at or below a given percentage. |
|
lirc |
0.10.2-1 |
LIRC is a package that allows you to decode and send infra-red signals of many (but not all) commonly used remote controls. |
|
list-smargo-emu |
2018-04-18-r11420_r769-2 |
Smargo reader support (+EMU) |
|
live555mediaserver |
2024.06.26-1 |
LIVE555 Streaming Media (live555MediaServer) |
|
live555proxyserver |
2024.06.26-1 |
LIVE555 Streaming Media (live555ProxyServer) |
|
lldpd |
1.0.17-5 |
LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed to supplant proprietary Link-Layer protocols such as Extreme's EDP (Extreme Discovery Protocol) and CDP (Cisco Discovery Protocol). The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver Link-Layer notifications to adjacent network devices. |
|
lm-sensors |
3.6.0-1 |
utility to read hardware sensor data |
|
lm-sensors-detect |
3.6.0-1 |
script to autodetect sensor hardware |
|
lmbench |
3.0-a4-1 |
lmbench is a series of micro benchmarks intended to measure basic operating system and hardware system metrics. |
|
lmdb |
0.9.32-1 |
LMDB is an ultra-fast, ultra-compact key-value embedded data store developed for the OpenLDAP Project. |
|
lmdb-test |
0.9.32-1 |
LMDB test application |
|
lmdb-utils |
0.9.32-1 |
LMDB environment status and copy tool |
|
loadwatch |
1.0+1.1alpha1-6 |
loadwatch allows one or more processes to run only when the load on a machine is within certain bounds. The child processes are sent SIGSTOP when the machines load passes the high load mark. The processes are sent SIGCONT only after the machines load drops below the low load mark. The load is checked at a user definable interval. |
|
locales |
2.27-9 |
locales support (independent of system lib) |
|
log4cplus |
2.1.1-1 |
log4cplus is a simple to use C++11 logging API providing thread--safe, flexible, and arbitrarily granular control over log management and configuration. It is modeled after the Java log4j API. |
|
loggedfs |
0.9-2 |
LoggedFS is a fuse-based filesystem which can log every operations that happens in it |
|
logger |
2.40.1-1 |
logger makes entries in the system log, it provides a shell command interface to the syslog system log module |
|
logrotate |
3.22.0-1 |
logrotate is designed to ease administration of systems that generate large numbers of log files. It allows auto-matic rotation, compression, removal and mailing of log files. Each log file may be handled daily, weekly, monthly or when it grows too large. |
|
look |
2.40.1-1 |
look utility displays any lines in file which contain string |
|
losetup |
2.40.1-1 |
losetup is used to associate loop devices with regular files or block devices, to detach loop devices and to query the status of a loop device |
|
loudmouth |
1.5.4-2 |
Lightweight and easy-to-use C library for programming with the Jabber protocol |
|
lrzsz |
0.12.21-1a |
lrzsz is a cosmetically modified zmodem/ymodem/xmodem package built from the public-domain version of Chuck Forsberg's rzsz package. These programs use error correcting protocols ({z,x,y}modem) to send (sz, sx, sb) and receive (rz, rx, rb) files over a dial-in serial port from a variety of programs running under various operating systems. |
|
lsattr |
1.47.0-2 |
Ext2 Filesystem lsattr utility |
|
lsblk |
2.40.1-1 |
lsblk lists information about all or the specified block devices |
|
lscpu |
2.40.1-1 |
lscpu displays information about the CPU architecture |
|
lsd |
1.1.2-1 |
LSD (LSDeluxe) An ls command with a lot of pretty colors and some other stuff. |
|
lslocks |
2.40.1-1 |
lslocks lists information about all the currently held file locks in a Linux system |
|
lsns |
2.40.1-1 |
lsns lists information about all namespaces and their processes |
|
lsof |
4.99.0-1 |
LiSt Open Files - a diagnostic tool |
|
ltrace |
0.7.9-2 |
ltrace intercepts and records dynamic library calls which are called by an executed process and the signals received by that process. It can also intercept and print the system calls executed by the program. |
|
lua |
5.1.5-11 |
Lua is a powerful light-weight programming language designed for extending applications. Lua is also frequently used as a general-purpose, stand-alone language. Lua is free software. This package contains the Lua language interpreter. |
|
lua-bit32 |
5.3.0-1 |
lua-bit32 is the native Lua 5.2 bit manipulation library, backported to Lua 5.1 |
|
lua-examples |
5.1.5-11 |
Lua is a powerful light-weight programming language designed for extending applications. Lua is also frequently used as a general-purpose, stand-alone language. Lua is free software. This package contains Lua language examples. |
|
lua5.3 |
5.3.5-6 |
Lua is a powerful, efficient, lightweight, embeddable scripting language. It supports procedural programming, object-oriented programming, functional programming, data-driven programming, and data description. This package contains the Lua language interpreter. |
|
luabitop |
1.0.2-1 |
Lua BitOp is a C extension module for Lua 5.1/5.2 which adds bitwise operations on numbers. |
|
luac |
5.1.5-11 |
Lua is a powerful light-weight programming language designed for extending applications. Lua is also frequently used as a general-purpose, stand-alone language. Lua is free software. This package contains the Lua language compiler. |
|
luac5.3 |
5.3.5-6 |
Lua is a powerful, efficient, lightweight, embeddable scripting language. It supports procedural programming, object-oriented programming, functional programming, data-driven programming, and data description. This package contains the Lua language compiler. |
|
luaexpat |
1.5.1-1 |
LuaExpat is a SAX XML parser based on the Expat library. |
|
luafilesystem |
1.8.0-1 |
This package contains the LuaFileSystem library, a set of portable functions for directory creation, listing and deletion and for file locking. |
|
luajit |
2.1.0-beta3-7 |
LuaJIT is a Just-In-Time (JIT) compiler for the Lua programming language. *** Requires GCC Multilib on host system to build! *** |
|
luajit2 |
2.1-20240626-1 |
OpenResty's maintained branch of LuaJIT, a Just-In-Time (JIT) compiler for the Lua programming language |
|
lualanes |
3.16.3-1 |
Lua Lanes is a Lua extension library providing the possibility to run multiple Lua states in parallel. It is intended to be used for optimizing performance on multicore CPU's and to study ways to make Lua programs naturally parallel to begin with. Lanes is included into your software by the regular require "lanes" method. No C side programming is needed; all APIs are Lua side, and most existing extension modules should work seamlessly together with the multiple lanes. Lanes supports Lua 5.1, 5.2 and 5.3 |
|
luaposix |
36.2.1-1 |
luaposix is a general POSIX library for Lua providing access to various low level libc functions. |
|
luasec |
1.3.2-1 |
LuaSec is a binding for OpenSSL library to provide TLS/SSL communication. |
|
luasocket |
3.1.0-2 |
LuaSocket is the most comprehensive networking support library for the Lua language. It provides easy access to TCP, UDP, DNS, SMTP, FTP, HTTP, MIME and much more. |
|
luv |
1.43.0-0-1 |
Bare libuv bindings for lua |
|
lux |
0.24.1-1 |
A fast, simple and clean video downloader built with Go (command line). |
|
lvm2 |
2.03.23-1 |
LVM2 refers to a new userspace toolset that provide logical volume management facilities on linux. It is reasonably backwards-compatible with the original LVM toolset. |
|
lynx |
2.9.2-1 |
Classic non-graphical (text-mode) web browser |
|
lyrebird |
0.2.0-1 |
This is a look-like nothing obfuscation protocol that incorporates ideas and concepts from Philipp Winter's ScrambleSuit protocol. The obfs naming was chosen primarily because it was shorter, in terms of protocol ancestery obfs4 is much closer to ScrambleSuit than obfs2/obfs3. |
|
lz4 |
1.9.4-1 |
LZ4 - Fast real-time compression algorithm. This package provides the lz4 binaries. |
|
lzmadec |
5.4.6-1 |
Contains: lzmadec |
|
lzmainfo |
5.4.6-1 |
Contains: lzmainfo |
|
m4 |
1.4.19-1 |
GNU M4 is an implementation of the traditional Unix macro processor. It is used by GNU Autoconf and Automake. |
|
madplay |
0.15.2b-10a |
MAD is an MPEG audio decoder. It currently only supports the MPEG 1 standard, but fully implements all three audio layers (Layer I, Layer II, and Layer III, the latter often colloquially known as MP3.). There is also full support for ID3 tags. |
|
make |
4.4.1-1 |
The Make package contains a tool to create executables from source files. |
|
man-db |
2.12.1-1 |
This package provides the man command, the primary way of examining the help files (manual pages). |
|
man-pages |
6.9-1 |
Linux kernel and C library user-space interface documentation. |
|
mariadb-client |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package includes the following core client binaries: mysql mysqlcheck |
|
mariadb-client-extra |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package includes the following extra client binaries: msql2mysql mysql_find_rows mysql_plugin mysql_waitpid mysqlaccess mysqlbinlog mysqldump mysqlimport mysqlshow mysqlslap mytop |
|
mariadb-common |
|
-2 |
|
mariadb-server |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package includes the following core server binaries: innochecksum my_print_defaults mysql_install_db mysql_upgrade mysqladmin mysqld |
|
mariadb-server-base |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the foundation for mariadb-server. It installs the init script, support files (configuration etc.), the user "mariadb" and the dependencies. |
|
mariadb-server-extra |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package includes the following extra server binaries: aria_chk aria_dump_log aria_ftdump aria_pack aria_read_log mariabackup myisam_ftdump myisamchk myisamlog myisampack mysql_convert_table_format mysql_fix_extensions mysql_secure_installation mysql_setpermission mysql_tzinfo_to_sql mysqld_multi mysqld_safe mysqld_safe_helper mysqldumpslow mysqlhotcopy perror replace resolve_stack_dump wsrep_sst_mariabackup wsrep_sst_mysqldump wsrep_sst_rsync wsrep_sst_rsync_wan |
|
mariadb-server-plugin-auth-ed25519 |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the auth_ed25519 plugin. |
|
mariadb-server-plugin-auth-gssapi |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the auth_gssapi plugin. |
|
mariadb-server-plugin-auth-pam |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the auth_pam plugin. |
|
mariadb-server-plugin-auth-pam-v1 |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the auth_pam_v1 plugin. |
|
mariadb-server-plugin-disks |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the disks plugin. |
|
mariadb-server-plugin-feedback |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the feedback plugin. |
|
mariadb-server-plugin-file-key-management |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the file_key_management plugin. |
|
mariadb-server-plugin-ha-archive |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the ha_archive plugin. |
|
mariadb-server-plugin-ha-blackhole |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the ha_blackhole plugin. |
|
mariadb-server-plugin-ha-connect |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the ha_connect plugin. |
|
mariadb-server-plugin-ha-federated |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the ha_federated plugin. |
|
mariadb-server-plugin-ha-federatedx |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the ha_federatedx plugin. |
|
mariadb-server-plugin-ha-sphinx |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the ha_sphinx plugin. |
|
mariadb-server-plugin-ha-spider |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the ha_spider plugin. |
|
mariadb-server-plugin-handlersocket |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the handlersocket plugin. |
|
mariadb-server-plugin-locales |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the locales plugin. |
|
mariadb-server-plugin-metadata-lock-info |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the metadata_lock_info plugin. |
|
mariadb-server-plugin-query-cache-info |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the query_cache_info plugin. |
|
mariadb-server-plugin-query-response-time |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the query_response_time plugin. |
|
mariadb-server-plugin-server-audit |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the server_audit plugin. |
|
mariadb-server-plugin-simple-password-check |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the simple_password_check plugin. |
|
mariadb-server-plugin-sql-errlog |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the sql_errlog plugin. |
|
mariadb-server-plugin-wsrep-info |
10.9.8-3 |
MariaDB is a very fast and robust SQL database server. This package provides the wsrep_info plugin. |
|
mathomatic |
16.0.5-1 |
Mathomatic can symbolically solve, simplify, combine, and compare algebraic equations, simultaneously performing generalized standard, complex number, modular, and polynomial arithmetic, as needed. |
|
maturin |
1.7.0-1 |
Build and publish crates with pyo3, rust-cpython and cffi bindings as well as rust binaries as python packages. |
|
mbedtls-util |
3.6.0-1 |
The aim of the mbedtls project is to provide a quality, open-source cryptographic library written in C and targeted at embedded systems. This package contains mbedtls helper programs for private key and CSR generation (gen_key, cert_req) |
|
mbim-utils |
1.30.0-2 |
Utilities to talk to MBIM enabled modems |
|
mc |
4.8.31-1 |
GNU Midnight Commander is a visual file manager. It's a feature rich full-screen text mode application that allows you to copy, move and delete files and whole directory trees, search for files and run commands in the subshell. Internal viewer and editor are included as well. |
|
mcabber |
1.1.2-1 |
mcabber is a small Jabber console client. mcabber includes features such as SASL/SSL/TLS support, MUC (Multi-User Chat) support, history logging, command completion, OpenPGP encryption, OTR (Off-the-Record Messaging) support, dynamic modules and external action triggers. |
|
mcookie |
2.40.1-1 |
mcookie generates a 128-bit random hexadecimal number for use with the X authority system |
|
mediainfo |
24.06-1 |
MediaInfo is a convenient unified display of the most relevant technical and tag data for video and audio files. |
|
megacmd |
1.7.0-1 |
MEGAcmd provides non UI access to MEGA services. It intends to offer all the functionality with your MEGA account via commands. |
|
memtester |
4.6.0-1 |
A userspace utility for testing the memory subsystem for faults. |
|
mercurial |
6.8-1 |
A fast, lightweight Source Control Management system designed for efficient handling of very large distributed projects. |
|
mergerfs |
2.33.4-1 |
mergerfs is a union filesystem geared towards simplifying storage and management of files across numerous commodity storage devices. It is similar to mhddfs, unionfs, and aufs. |
|
mg |
7.3-3 |
Mg is intended to be a small, fast, and portable editor for people who can't (or don't want to) run emacs for one reason or another, or are not familiar with the vi editor. It is compatible with emacs because there shouldn't be any reason to learn more editor types than emacs or vi. |
|
microdc2 |
0.15.6-20180718-3 |
A command-line based Direct Connect client. |
|
minesweep-rs |
6.0.54-1 |
A terminal battleship game in Rust. |
|
mini_snmpd |
1.6-3 |
A tiny SNMP server for embedded systems |
|
minicom |
2.9-1 |
Terminal emulation program |
|
minidlna |
1.3.3-1 |
MiniDLNA (aka ReadyDLNA) is server software with the aim of being fully compliant with DLNA/UPnP-AV clients. |
|
minisatip_ndms |
0.7-3 |
Minisatip is a multi-threaded satip server version 1.2 that runs under Linux and it was tested with DVB-S, DVB-S2, DVB-T, DVB-T2, DVB-C, DVB-C2, ATSC and ISDB-T cards. |
|
minissdpd |
2.3.7-1 |
MiniSSDPd is a daemon that: 1 - keeps track of all UPnP devices announcing themselves on the network. its database can be queried by local processes using a protocol based on a unix socket. That enables local processes to quickly discover UPnP devices without broadcasting SSDP message and waiting several seconds for a response. 2 - keeps a database of local UPnP devices hosted on the machine and answering SSDP searchs on their behalf. It enables to run several UPnP devices, like an IGD and a MediaServer, on the same machine. |
|
miniupnpc |
2.2.8-1 |
Lightweight UPnP client |
|
miniupnpd-iptables |
2.3.6-1 |
Lightweight UPnP IGD & PCP/NAT-PMP daemon (iptables) |
|
miredo |
1.2.6-3 |
Miredo is an open-source Teredo IPv6 tunneling software, for Linux and the BSD operating systems. It includes functional implementations of all components of the Teredo specification (client, relay and server). It is meant to provide IPv6 connectivity even from behind NAT devices. |
|
mjpg-streamer |
1.0.0-6 |
Streaming application for Linux-UVC compatible webcams |
|
mjpg-streamer-input-file |
1.0.0-6 |
Streaming application for Linux-UVC compatible webcams This package provides the file input plugin. |
|
mjpg-streamer-input-http |
1.0.0-6 |
Streaming application for Linux-UVC compatible webcams This package provides the http input plugin. |
|
mjpg-streamer-input-uvc |
1.0.0-6 |
Streaming application for Linux-UVC compatible webcams This package provides the UVC input plugin. |
|
mjpg-streamer-output-file |
1.0.0-6 |
Streaming application for Linux-UVC compatible webcams This package provides the file output plugin. |
|
mjpg-streamer-output-http |
1.0.0-6 |
Streaming application for Linux-UVC compatible webcams This package provides the HTTP output plugin. |
|
mjpg-streamer-output-rtsp |
1.0.0-6 |
Streaming application for Linux-UVC compatible webcams This package provides the RTSP output plugin. |
|
mjpg-streamer-www |
1.0.0-6 |
Streaming application for Linux-UVC compatible webcams This package provides full version of the web content. Includes cambozola applet. |
|
mkf2fs |
1.16.0-3 |
Utility for creating a Flash-Friendly File System (F2FS) |
|
mkhfs |
540.1.linux3-2 |
Utilities to create and check HFS/HFS+ filesystems. (mkfs.hfs and mkfs.hfsplus for creating HFS/HFS+ volumes) |
|
mktorrent |
1.1-2a |
mktorrent |
|
mkvtoolnix |
58.0.0-5 |
A set of tools to create, alter and inspect Matroska files. |
|
mlocate |
0.26-1 |
Quickly find files on the filesystem based on their name mlocate is a new implementation of locate, a tool to find files anywhere in the filesystem based on their name, using a fixed pattern or a regular expression. Unlike other tools like find(1), locate uses a previously created database to perform the search, allowing queries to execute much faster. This database is updated periodically from cron. |
|
monit |
5.34.0-1 |
An utility for monitoring services on a Unix system This package is built with SSL support. |
|
monit-nossl |
5.34.0-1 |
An utility for monitoring services on a Unix system This package is built without SSL support. |
|
more |
2.40.1-1 |
more is a filter for paging through text one screenful at a time |
|
moreutils |
0.69-2 |
This is a growing collection of the Unix tools that nobody thought to write long ago, when Unix was young. . So far, it includes the following utilities: - chronic: runs a command quietly unless it fails - combine: combine the lines in two files using boolean operations - errno: look up errno names and descriptions - ifdata: get network interface info without parsing ifconfig output - ifne: run a program if the standard input is not empty - isutf8: check if a file or standard input is utf-8 - lckdo: execute a program with a lock held - mispipe: pipe two commands, returning the exit status of the first - parallel: run multiple jobs at once - pee: tee standard input to pipes - sponge: soak up standard input and write to a file - ts: timestamp standard input - vidir: edit a directory in your text editor - vipe: insert a text editor into a pipe - zrun: automatically uncompress arguments to command |
|
mosh-client |
1.4.0-1 |
Mosh is a remote terminal application that allows roaming, supports intermittent connectivity, and provides intelligent local echo and line editing of user keystrokes. This is a mosh client. |
|
mosh-full |
1.4.0-1 |
Mosh is a remote terminal application that allows roaming, supports intermittent connectivity, and provides intelligent local echo and line editing of user keystrokes. This is a full package with perl wrapper script |
|
mosh-server |
1.4.0-1 |
Mosh is a remote terminal application that allows roaming, supports intermittent connectivity, and provides intelligent local echo and line editing of user keystrokes. This is a mosh server. |
|
mosquitto-client-nossl |
2.0.18-3 |
Command line client tools for working with mosquitto. This includes mosquitto_sub, mosquitto_pub, mosquitto_rr and the mosquitto_ctrl tool. This package is built without SSL support |
|
mosquitto-client-ssl |
2.0.18-3 |
Command line client tools for working with mosquitto. This includes mosquitto_sub, mosquitto_pub, mosquitto_rr and the mosquitto_ctrl tool. This package is built with SSL support |
|
mosquitto-nossl |
2.0.18-3 |
Mosquitto is an open source (BSD licensed) message broker that implements the MQTT protocol version 3.1, 3.1.1 and 5. MQTT provides a lightweight method of carrying out messaging using a publish/subscribe model. This package also includes some basic support for configuring via UCI This package is built WITHOUT SSL support. |
|
mosquitto-ssl |
2.0.18-3 |
Mosquitto is an open source (BSD licensed) message broker that implements the MQTT protocol version 3.1, 3.1.1 and 5. MQTT provides a lightweight method of carrying out messaging using a publish/subscribe model. This package also includes some basic support for configuring via UCI This package is built with SSL support. TLS-PSK will be included (in both the client and broker) if OpenSSL is built with TLS-PSK support. |
|
motion-ffmpeg |
4.5.0-1 |
Motion is a program that monitor video signals from many types of cameras and depending upon how they are configured, perform actions when movement is detected. This package is built with FFMPEG support. |
|
motion-noffmpeg |
4.5.0-1 |
Motion is a program that monitor video signals from many types of cameras and depending upon how they are configured, perform actions when movement is detected. This package is built without FFMPEG support. |
|
mount-utils |
2.40.1-1 |
contains: mount, umount, findmnt |
|
movgrab |
3.1.2-1 |
Movgrab is a command line tool for downloading video clips from websites such as YouTube, Daily Motion, Break.com, Vimeo, Blip.tv, Liveleak and others. |
|
mp3gain |
1.6.2-2 |
MP3Gain analyzes and adjusts mp3 files so that they have the same volume. |
|
mp707 |
1.0.2-1 |
This utility works with USB thermometer MP707 (BM1707). More information on device can be found at http://www.masterkit.ru |
|
mpc |
0.35-1 |
MPD is a music player supporting flac, mp3 and ogg files. It is typically controlled over a network using one of it's many clients including mpc(console), gmpc(gnome), phpmp(php) etc. this is MPC |
|
mpd-full |
0.23.15-1 |
Music Player Daemon (MPD) is a flexible, powerful, server-side application for playing music. It is typically controlled over a network using one of it's many clients including mpc (console), gmpc (gnome), phpmp (php), etc... . This package contains a full-blown Music Player Daemon. |
|
mpd-mini |
0.23.15-1 |
Music Player Daemon (MPD) is a flexible, powerful, server-side application for playing music. It is typically controlled over a network using one of it's many clients including mpc (console), gmpc (gnome), phpmp (php), etc... . This package contains a minimal Music Player Daemon, with support for only FLAC, AAC, MP3 & OGG media types & only file: & http: protocols. |
|
mpdscribble |
0.24-4 |
MPD scribble is a music player daemon client which submits information about tracks being played to Last.fm. |
|
mpg123 |
1.32.6-1 |
fast console mpeg audio player |
|
mqtt-exec |
0.5-1 |
A simple mqtt subscriber that executes a command on mqtt messages |
|
mrouted |
4.5-1 |
routed is a 3-clause BSD licensed implementation of the DVMRP multicast routing protocol. It can run on any UNIX based system, from embedded Linux systems to workstations, turning them into multicast routers with tunnel support, which can be used to cross non-multicast-aware routers. |
|
msd |
3.01.0-1 |
Multi stream daemon. Program for organizing IP TV streaming on the network via HTTP. |
|
msgpack-c |
6.0.0-1 |
MessagePack is an efficient binary serialization format, which lets you exchange data among multiple languages like JSON, except that it's faster and smaller. Small integers are encoded into a single byte and short strings require only one extra byte in addition to the strings themselves. |
|
msmtp |
1.8.26-1 |
msmtp is an SMTP client. In the default mode, it transmits a mail to an SMTP server (for example at a free mail provider) which does the delivery. To use this program with your mail user agent (MUA), create a configuration file with your mail account(s) and tell your MUA to call msmtp instead of /opt/sbin/sendmail. This package is built with SSL support. |
|
msmtp-nossl |
1.8.26-1 |
msmtp is an SMTP client. In the default mode, it transmits a mail to an SMTP server (for example at a free mail provider) which does the delivery. To use this program with your mail user agent (MUA), create a configuration file with your mail account(s) and tell your MUA to call msmtp instead of /opt/sbin/sendmail. This package is built without SSL support. |
|
msmtp-queue |
1.8.26-1 |
msmtp is an SMTP client. In the default mode, it transmits a mail to an SMTP server (for example at a free mail provider) which does the delivery. To use this program with your mail user agent (MUA), create a configuration file with your mail account(s) and tell your MUA to call msmtp instead of /opt/sbin/sendmail. This package contains the msmtp queue scripts. |
|
mtr-json |
0.95-3 |
Full screen ncurses traceroute tool With JSON |
|
mtr-nojson |
0.95-3 |
Full screen ncurses traceroute tool Without JSON |
|
multitail |
7.1.3-1 |
MultiTail allows you to monitor logfiles and command output in multiple windows in a terminal, colorize, filter and merge. |
|
music-center |
0.1-7 |
It`s a metapackage to install config and scripts files on Keenetic routers. |
|
mutt |
2.1.5-2 |
Mutt is a small but very powerful text-based mail client for Unix operating systems. |
|
nagios |
3.5.1-1 |
service and network monitoring program |
|
nagios-plugins |
2.0.3-3 |
plugins for Nagios checks |
|
nail |
12.5-5 |
Heirloom mailx (formerly known as "nail") is intended provide the functionality of the POSIX mailx command with additional support for MIME messages, IMAP (including caching), POP3, SMTP, S/MIME, message threading/sorting, scoring, and filtering |
|
namei |
2.40.1-1 |
namei uses its arguments as pathnames to any type of Unix file (symlinks, files, directories, and so forth) |
|
nand-utils |
2.2.0-1 |
Utilities for NAND devices. |
|
nano |
8.0-1 |
Nano is a small and simple text editor for use on the terminal. Nano started as an enhanced clone of the Pico text editor. Nowadays Nano wants to be a generally useful editor with sensible defaults (linewise scrolling, no automatic line breaking). Nano is an official GNU package. |
|
nano-full |
8.0-1 |
nano-full - all features, including syntax highlighting (also uci), multibuffer, Unicode/UTF-8, nanorc, some key bindings. (libmagic-based file type detection is disabled) Example /etc/nanorc is included. nanorc documentation at https://www.nano-editor.org/dist/latest/nanorc.5.html Nano is a small and simple text editor for use on the terminal. Nano started as an enhanced clone of the Pico text editor. Nowadays Nano wants to be a generally useful editor with sensible defaults (linewise scrolling, no automatic line breaking). Nano is an official GNU package. |
|
nano-plus |
8.0-1 |
nano-plus - Additional features enabled, larger size than default nano. (multibuffer, Unicode/UTF-8, help, justify, nanorc, some key bindings) Nano is a small and simple text editor for use on the terminal. Nano started as an enhanced clone of the Pico text editor. Nowadays Nano wants to be a generally useful editor with sensible defaults (linewise scrolling, no automatic line breaking). Nano is an official GNU package. |
|
natpmpc |
20230423-1 |
libnatpmp is an attempt to make a portable and fully compliant implementation of the protocol for the client side. It is based on non blocking sockets and all calls of the API are asynchronous. It is therefore very easy to integrate the NAT-PMP code to any event driven code. This package contains the natpmp client. |
|
ncat |
7.95-1 |
Much-improved reimplementation of Netcat |
|
ncat-ssl |
7.95-1 |
Ncat (with OpenSSL support) |
|
ncdc |
1.24-1 |
ncdc is a modern and lightweight direct connect client with a friendly ncurses interface. |
|
ncdu |
1.20-1 |
Ncdu is a ncurses-based du viewer. It provides a fast and easy-to-use interface through famous du utility. It allows one to browse through the directories and show percentages of disk usage with ncurses library. |
|
ncftp |
3.2.7-1 |
NcFTP Client (also known as just NcFTP) is a set of FREE application programs implementing the File Transfer Protocol (FTP). Main program. |
|
ncftp-utils |
3.2.7-1 |
NcFTP Client (also known as just NcFTP) is a set of FREE application programs implementing the File Transfer Protocol (FTP). Utilities. |
|
ncurses-bin |
6.4-3 |
Terminal-related programs |
|
ndiff |
7.95-1 |
Utility to compare the results of Nmap scans |
|
ndisc6 |
1.0.8-1 |
NDisc6 is a small collection of useful tools for IPv6 networking. ndisc6: ICMPv6 Neighbor Discovery tool |
|
ndmq |
|
.2-7 |
|
ndppd |
0.2.5-2 |
ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. |
|
nebula |
1.9.3-1 |
Nebula is a scalable overlay networking tool with a focus on performance, simplicity and security. It lets you seamlessly connect computers anywhere in the world. Nebula is portable, and runs on Linux, OSX, and Windows. It can be used to connect a small number of computers, but is also able to connect tens of thousands of computers. |
|
neovim |
0.9.5-1 |
Vim-fork focused on extensibility and usability. |
|
net-tools |
2.10-1a |
Linux base networking tools. |
|
net-tools-route |
2.10-1a |
Replace busybox version of the route command with the full net-tools version. This is normally not needed as busybox is smaller and provides sufficient functionality, but some users may want or need the full functionality of the net-tools variant (e.g. AF_X25). |
|
netcat |
0.7.1-2a |
Netcat is a featured networking utility which reads and writes data across network connections, using the TCP/IP protocol. It is designed to be a reliable "back-end" tool that can be used directly or easily driven by other programs and scripts. At the same time, it is a feature-rich network debugging and exploration tool, since it can create almost any kind of connection you would need and has several interesting built-in capabilities. |
|
netdata |
1.33.1-4 |
netdata is a highly optimized Linux daemon providing real-time performance monitoring for Linux systems, applications and SNMP devices over the web. If you want to use Python plugins install python3, python3-yaml and python3-urllib3 |
|
netflow-exporter |
0.0.0-1 |
This is an exporter that exposes information gathered from netflow for use by the Prometheus monitoring system. |
|
nethack |
3.6.7-1 |
Unlike many other Dungeons & Dragons-inspired games, the emphasis in NetHack is on discovering the detail of the dungeon and not simply killing everything in sight - in fact, killing everything in sight is a good way to die quickly. |
|
nethogs |
0.8.7-1 |
NetHogs is a small 'net top' tool. Instead of breaking the traffic down per protocol or per subnet, like most tools do, it groups bandwidth by process. If there's suddenly a lot of network traffic, you can fire up NetHogs and immediately see which PID is causing this. This makes it easy to indentify programs that have gone wild and are suddenly taking up your bandwidth. |
|
netperf |
2.7.0-3 |
Network performance measurement tool |
|
nextdns |
1.43.5-1 |
NextDNS CLI is a DNS53 to DNS-over-HTTPS (DoH) proxy with advanced capabilities to get the most out of the NextDNS service. Although the most advanced features will only work with NextDNS, this program can work as a client for any DoH provider or a mix of NextDNS + another DNS (split horizon). |
|
nfs-kernel-server |
2.6.2-4 |
Kernel NFS server support |
|
nfs-kernel-server-utils |
2.6.2-4 |
NFS server utils |
|
nfs-utils |
2.6.2-4 |
Updated mount.nfs command - allows mounting nfs4 volumes |
|
nfs-utils-libs |
2.6.2-4 |
Libraries provided by nfs-utils |
|
nfusr |
1.0.0-20190319-1 |
nfusr is a userspace FUSE client for accessing NFSv3 servers based on libnfs. |
|
nginx |
1.26.1-1 |
nginx is an HTTP and reverse proxy server, as well as a mail proxy server, written by Igor Sysoev. |
|
nginx-mod-brotli |
1.26.1-1 |
Add support for brotli compression module. |
|
nginx-mod-dav-ext |
1.26.1-1 |
Enable the WebDAV methods PROPFIND OPTIONS LOCK UNLOCK. |
|
nginx-mod-geoip2 |
1.26.1-1 |
Enable MaxMind GeoIP2 module. |
|
nginx-mod-headers-more |
1.26.1-1 |
Set and clear input and output headers...more than "add"! |
|
nginx-mod-lua |
1.26.1-1 |
Enable Lua module (luajit2 based, OpenResty patches) |
|
nginx-mod-lua-resty-core |
1.26.1-1 |
Nginx Lua OpenResty core module |
|
nginx-mod-lua-resty-lrucache |
1.26.1-1 |
Nginx Lua OpenResty lrucache module |
|
nginx-mod-naxsi |
1.26.1-1 |
Enable NAXSI module. |
|
nginx-mod-rtmp |
1.26.1-1 |
Add support for NGINX-based Media Streaming Server module. DASH enhanced |
|
nginx-mod-stream |
1.26.1-1 |
Add support for NGINX request streaming. |
|
nginx-mod-ts |
1.26.1-1 |
Add support for MPEG-TS Live Module module. |
|
nginx-ssl |
1.26.1-1 |
nginx is an HTTP and reverse proxy server, as well as a mail proxy server, written by Igor Sysoev. This variant is compiled with SSL support enabled. To enable additional module select them in the nginx default configuration menu. |
|
ngrep |
1.47-2 |
ngrep a pcap-aware tool that will allow you to specify extended regular expressions to match against data payloads of packets. It currently recognizes TCP, UDP, and ICMP across Ethernet, PPP, SLIP, FDDI, Token Ring and null interfaces, and understands BPF filter logic in the same fashion as more common packet sniffing tools, like tcpdump and snoop. |
|
ngrok-c |
1.45-20180507-1 |
ngrok client written in C. |
|
nload |
0.7.4-1 |
Monitors network traffic and bandwidth usage. |
|
nmap |
7.95-1 |
Utility for network exploration or security auditing |
|
nmap-ssl |
7.95-1 |
Nmap (with OpenSSL support) |
|
nmon |
16p-1 |
Linux performance monitoring on-screen or to CSV file. |
|
nnn |
4.9-1 |
nnn is full-featured tiny terminal file manager and disk usage analyzer, fuzzy app launcher, batch file renamer and file picker. |
|
node |
v18.20.2-1 |
Node.js® is a JavaScript runtime built on Chrome's V8 JavaScript engine. Node.js uses an event-driven, non-blocking I/O model that makes it lightweight and efficient. Node.js' package ecosystem, npm, is the largest ecosystem of open source libraries in the world. *** The following preparations must be made on the host side. *** 1. gcc 8.3 or higher is required. 2. To build a 32-bit target, gcc-multilib, g++-multilib are required. 3. Requires libatomic package. (If necessary, install the 32-bit library at the same time.) ex) sudo apt-get install gcc-multilib g++-multilib |
|
node-npm |
v18.20.2-1 |
NPM is the package manager for NodeJS |
|
nonroot |
20120608-1 |
This is a small utility for starting executables as a non-privileged user, when running as the superuser (e.g. in an init-script). |
|
noping |
1.10.0-3 |
Ncurses application to send ICMP echo request to network hosts |
|
nping |
7.95-1 |
Network packet generation tool / ping utility |
|
nping-ssl |
7.95-1 |
Nping (with OpenSSL support) |
|
nqptp |
1.2.4-1 |
nqptp is a daemon that monitors timing data from PTP clocks it sees on ports 319 and 320. It maintains records for one clock, identified by its Clock ID. It is a companion application to Shairport Sync and provides timing information for AirPlay 2 operation. |
|
nsenter |
2.40.1-1 |
run program with namespaces of other processes |
|
nstat |
4.4.0-10b |
Network statistics utility |
|
ntfs-3g |
2022.5.17-1-fuseext |
Ntfs-3g is a NTFS driver, which can create, remove, rename, move files, directories, hard links, and streams. It can read and write files, including streams and sparse files. It can handle special files like symbolic links, devices, and FIFOs. Moreover it can also read transparently compressed files. Contains: - ntfs-3g - ntfs-3g.probe - mount.ntfs-3g (symlink to ntfs-3g) |
|
ntfs-3g-low |
2022.5.17-1-fuseext |
Contains: - lowntfs-3g - mount.lowntfs-3g (symlink to lowntfs-3g) A driver variant using the fuse low-level interface missing some of the enhanced functionality for streams or the like. You might want to check: http://www.tuxera.com/community/ntfs-3g-manual/ |
|
ntfs-3g-utils |
2022.5.17-1-fuseext |
Suite of NTFS utilities for doing neat things with NTFS. Contains: - mkntfs - Create an NTFS filesystem. - ntfscat - Dump a file's content to the standard output. - ntfsclone - Efficiently clone, backup, restore or rescue NTFS. - ntfscluster - Locate the files which use the given sectors or clusters. - ntfscmp - Compare two NTFS filesystems and tell the differences. - ntfscp - Copy a file to an NTFS volume. - ntfssecaudit - Display ownership and permissions, check consistency - ntfsfix - Check and fix some common errors, clear the LogFile. - ntfsinfo - Show information about NTFS or one of the files or directories within it. - ntfslabel - Show, or set, an NTFS filesystem's volume label. - ntfsls - List information about files in a directory residing on an NTFS. - ntfsresize - Resize NTFS without losing data. - ntfsundelete - Recover deleted files from NTFS. - ntfsusermap - Define mapping of Windows accounts to Linux logins |
|
ntopng |
6.0-1 |
Web-based Traffic and Security Network Traffic Monitoring. |
|
ntp-keygen |
4.2.8p17-1 |
The ISC ntp suite is a collection of tools used to synchronize the system clock with remote NTP time servers and run/monitor local NTP servers. . This package contains the ntp-keygen. |
|
ntp-utils |
4.2.8p17-1 |
The ISC ntp suite is a collection of tools used to synchronize the system clock with remote NTP time servers and run/monitor local NTP servers. . This package contains ntpdc, ntpq, ntptime and sntp. |
|
ntpd |
4.2.8p17-1 |
The ISC ntp suite is a collection of tools used to synchronize the system clock with remote NTP time servers and run/monitor local NTP servers. . This package contains the ntpd server. |
|
ntpdate |
4.2.8p17-1 |
The ISC ntp suite is a collection of tools used to synchronize the system clock with remote NTP time servers and run/monitor local NTP servers. . This package contains ntpdate. |
|
nut |
2.8.1-1 |
Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. |
|
nut-common |
2.8.1-1 |
Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. This package contains the common files. |
|
nut-driver-al175 |
2.8.1-1 |
Driver for Eltek UPS models with AL175 alarm module |
|
nut-driver-apcsmart |
2.8.1-1 |
Driver for American Power Conversion Smart Protocol UPS equipment |
|
nut-driver-apcsmart-old |
2.8.1-1 |
Driver for American Power Conversion Smart Protocol UPS equipment |
|
nut-driver-apcupsd-ups |
2.8.1-1 |
Driver for apcupsd client access |
|
nut-driver-bcmxcp |
2.8.1-1 |
Driver for UPSes supporting the serial BCM/XCP protocol |
|
nut-driver-bcmxcp_usb |
2.8.1-1 |
Experimental driver for UPSes supporting the BCM/XCP protocol over USB |
|
nut-driver-belkin |
2.8.1-1 |
Driver for Belkin serial UPS equipment |
|
nut-driver-belkinunv |
2.8.1-1 |
Driver for Belkin "Universal UPS" and compatible |
|
nut-driver-bestfcom |
2.8.1-1 |
Driver for Best Power Fortress/Ferrups |
|
nut-driver-bestfortress |
2.8.1-1 |
Driver for old Best Fortress UPS equipment |
|
nut-driver-bestuferrups |
2.8.1-1 |
Driver for Best Power Micro-Ferrups |
|
nut-driver-bestups |
2.8.1-1 |
Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment |
|
nut-driver-blazer_ser |
2.8.1-1 |
Driver for Megatec/Q1 protocol serial based UPS equipment |
|
nut-driver-blazer_usb |
2.8.1-1 |
Driver for Megatec/Q1 protocol USB based UPS equipment |
|
nut-driver-clone |
2.8.1-1 |
UPS driver clone |
|
nut-driver-dummy-ups |
2.8.1-1 |
Driver for multi-purpose UPS emulation |
|
nut-driver-etapro |
2.8.1-1 |
Driver for ETA UPS equipment |
|
nut-driver-everups |
2.8.1-1 |
Driver for Ever UPS models |
|
nut-driver-gamatronic |
2.8.1-1 |
Driver for Gamatronic UPS equipment |
|
nut-driver-genericups |
2.8.1-1 |
Driver for contact-closure UPS equipment |
|
nut-driver-isbmex |
2.8.1-1 |
Driver for ISBMEX UPS equipment |
|
nut-driver-ivtscd |
2.8.1-1 |
Driver for the IVT Solar Controller Device |
|
nut-driver-liebert |
2.8.1-1 |
Driver for Liebert contact-closure UPS equipment |
|
nut-driver-liebert-esp2 |
2.8.1-1 |
Driver for Liebert UPS |
|
nut-driver-masterguard |
2.8.1-1 |
Driver for Masterguard UPS equipment |
|
nut-driver-metasys |
2.8.1-1 |
Driver for Meta System UPS equipment |
|
nut-driver-mge-shut |
2.8.1-1 |
Driver for SHUT Protocol UPS equipment |
|
nut-driver-mge-utalk |
2.8.1-1 |
Driver for MGE UPS SYSTEMS UTalk protocol equipment |
|
nut-driver-microdowell |
2.8.1-1 |
Driver for Microdowell Enterprise UPS series |
|
nut-driver-netxml-ups |
2.8.1-1 |
Driver for NetXML based UPS equipment |
|
nut-driver-nutdrv_atcl_usb |
2.8.1-1 |
Driver for ATCL FOR UPS equipment |
|
nut-driver-nutdrv_qx |
2.8.1-1 |
Driver for Q* protocol serial and USB based UPS equipment |
|
nut-driver-oneac |
2.8.1-1 |
Driver for Oneac UPS equipment |
|
nut-driver-optiups |
2.8.1-1 |
Driver for Opti-UPS (Viewsonic) UPS and Zinto D (ONLINE-USV) equipment |
|
nut-driver-powercom |
2.8.1-1 |
Driver for serial Powercom/Trust/Advice UPS equipment |
|
nut-driver-powerpanel |
2.8.1-1 |
Driver for PowerPanel Plus compatible UPS equipment |
|
nut-driver-rhino |
2.8.1-1 |
Driver for Brazilian Microsol RHINO UPS equipment |
|
nut-driver-richcomm_usb |
2.8.1-1 |
Driver for UPS equipment using Richcomm dry-contact to USB solution |
|
nut-driver-riello_ser |
2.8.1-1 |
Driver for Riello UPS Protocol UPS equipment |
|
nut-driver-riello_usb |
2.8.1-1 |
Driver for Riello UPS Protocol UPS equipment via USB |
|
nut-driver-safenet |
2.8.1-1 |
Driver for SafeNet compatible UPS equipment |
|
nut-driver-snmp-ups |
2.8.1-1 |
Multi-MIB Driver for SNMP UPS equipment |
|
nut-driver-solis |
2.8.1-1 |
Driver for Brazilian Microsol SOLIS UPS equipment |
|
nut-driver-tripplite |
2.8.1-1 |
Driver for Tripp-Lite SmartPro UPS equipment |
|
nut-driver-tripplite_usb |
2.8.1-1 |
Driver for older Tripp Lite USB UPSes (not PDC HID) |
|
nut-driver-tripplitesu |
2.8.1-1 |
Driver for Tripp-Lite SmartOnline (SU) UPS equipment |
|
nut-driver-upscode2 |
2.8.1-1 |
Driver for UPScode II compatible UPS equipment |
|
nut-driver-usbhid-ups |
2.8.1-1 |
Driver for USB/HID UPS equipment |
|
nut-driver-victronups |
2.8.1-1 |
Driver for IMV/Victron UPS unit Match |
|
nut-server |
2.8.1-1 |
Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upsd is responsible for serving the data from the drivers to the clients. It connects to each driver and maintains a local cache of the current state. Queries from the clients are served from this cache, so delays are minimal. This program is essential, and must be running at all times to actually make any use out of the drivers and clients. |
|
nut-upsc |
2.8.1-1 |
Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upsc is provided as a quick way to poll the status of a UPS server. It can be used inside shell scripts and other programs that need UPS data but do not want to include the full interface. |
|
nut-upscmd |
2.8.1-1 |
Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upscmd allows you to invoke "instant commands" in your UPS hardware. Not all hardware supports this, so check the list with -l to see if anything will work on your equipment. On hardware that supports it, you can use this program to start and stop battery tests, invoke a front panel test (beep!), turn the load on or off, and more. |
|
nut-upslog |
2.8.1-1 |
Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upslog is a daemon that will poll a UPS at periodic intervals, fetch the variables that interest you, format them, and write them to a file. |
|
nut-upsmon |
2.8.1-1 |
Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upsmon is the client process that is responsible for the most important part of UPS monitoring--shutting down the system when the power goes out. It can call out to other helper programs for notification purposes during power events. upsmon can monitor multiple systems using a single process. Every UPS that is defined in the upsmon.conf configuration file is assigned a power value and a type (slave or master). |
|
nut-upsrw |
2.8.1-1 |
Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upsrw allows you to view and change the read/write variables inside your UPS. It sends commands via the upsd to your driver, which configures the hardware for you. The list of variables that allow you to change their values is based on the capabilities of your UPS equipment. Not all models support this feature. Typically, cheaper hardware does not support any of them. |
|
nut-upssched |
2.8.1-1 |
Network UPS Tools (NUT) is a client/server monitoring system that allows computers to share uninterruptible power supply (UPS) and power distribution unit (PDU) hardware. Clients access the hardware through the server, and are notified whenever the power status changes. upssched was created to allow users to execute programs at times relative to events being monitored by upsmon. The original purpose was to allow for a shutdown to occur after some fixed period on battery, but there are other uses that are possible. You can alternatively write your own script and save some space. |
|
nut-web-cgi |
2.8.1-1 |
The CGI programs are clients that run through your web server. They allow you to see UPS status and perform certain administrative commands from any web browser. Javascript and cookies are not required. |
|
nyancat |
1.5.2-1 |
Nyancat rendered in your terminal. |
|
nzbget |
21.1-2 |
A command-line client/server based binary newsgrabber for nzb-files. |
|
obfs4 |
0.0.14-1 |
obfs4proxy is a tool that attempts to circumvent censorship by transforming the Tor traffic between the client and the bridge. This way censors, who usually monitor traffic between the client and the bridge, will see innocent-looking transformed traffic instead of the actual Tor traffic. obfs4proxy implements the obfsucation protocols obfs2, obfs3, and obfs4. It is written in Go and is compliant with the Tor pluggable transports specification, and its modular architecture allows it to support multiple pluggable transports. |
|
objdump |
2.42-1 |
objdump |
|
ocserv |
1.3.0-2 |
OpenConnect server (ocserv) is an SSL VPN server. Its purpose is to be a secure, small, fast and configurable VPN server. It implements the OpenConnect SSL VPN protocol, and has also (currently experimental) compatibility with clients using the AnyConnect SSL VPN protocol. The OpenConnect VPN protocol uses the standard IETF security protocols such as TLS 1.2, and Datagram TLS to provide the secure VPN service. |
|
oidentd |
3.1.0-1 |
A nat aware identd server that will correctly forwared requests to clients. |
|
olsrd |
2024.06.09~d72be9ad-1 |
OLSR (Optimized Link State Routing) daemon |
|
olsrd-mod-arprefresh |
2024.06.09~d72be9ad-1 |
Kernel ARP cache refresh plugin |
|
olsrd-mod-bmf |
2024.06.09~d72be9ad-1 |
Basic multicast forwarding plugin |
|
olsrd-mod-dot-draw |
2024.06.09~d72be9ad-1 |
Dot topology information plugin |
|
olsrd-mod-dyn-gw |
2024.06.09~d72be9ad-1 |
Dynamic internet gateway plugin |
|
olsrd-mod-dyn-gw-plain |
2024.06.09~d72be9ad-1 |
Dynamic internet gateway plain plugin |
|
olsrd-mod-filtergw |
2024.06.09~d72be9ad-1 |
Filter Gateway plugin |
|
olsrd-mod-httpinfo |
2024.06.09~d72be9ad-1 |
Small informative web server plugin |
|
olsrd-mod-jsoninfo |
2024.06.09~d72be9ad-1 |
Small informative plugin with JSON output |
|
olsrd-mod-mdns |
2024.06.09~d72be9ad-1 |
MDNS/Zeroconf/Bonjour packet distribution |
|
olsrd-mod-nameservice |
2024.06.09~d72be9ad-1 |
Lightweight hostname resolver plugin |
|
olsrd-mod-netjson |
2024.06.09~d72be9ad-1 |
netjson plugin with JSON output |
|
olsrd-mod-p2pd |
2024.06.09~d72be9ad-1 |
Peer to Peer Discovery plugin |
|
olsrd-mod-pgraph |
2024.06.09~d72be9ad-1 |
output network topology for pgraph |
|
olsrd-mod-pud |
2024.06.09~d72be9ad-1 |
Position Update Distribution plugin |
|
olsrd-mod-quagga |
2024.06.09~d72be9ad-1 |
Quagga plugin |
|
olsrd-mod-secure |
2024.06.09~d72be9ad-1 |
Message signing plugin to secure routing domain |
|
olsrd-mod-sgwdynspeed |
2024.06.09~d72be9ad-1 |
Smart Gateway dynamic speed plugin |
|
olsrd-mod-txtinfo |
2024.06.09~d72be9ad-1 |
Small informative web server plugin |
|
olsrd-mod-watchdog |
2024.06.09~d72be9ad-1 |
Watchdog plugin |
|
oniguruma |
6.9.9-1a |
Oniguruma is a modern and flexible regular expressions library. It encompasses features from different regular expression implementations that traditionally exist in different languages. Character encoding can be specified per regular expression object. |
|
openconnect |
9.12-4 |
A VPN client compatible with several SSL VPN implementations (ocserv, Cisco AnyConnect, Juniper, Palo Alto) OpenConnect is an SSL VPN client initially created to support Cisco's AnyConnect SSL VPN. It has since been extended to support the Pulse Connect Secure VPN (formerly known as Juniper Network Connect or Junos Pulse) and the Palo Alto Networks GlobalProtect SSL VPN. A corresponding OpenConnect VPN server implementation can be found in the ocserv package. |
|
opendchub |
0.8.3-1 |
Open DC hub is a Unix/Linux version of the hub software for the Direct Connect network |
|
opendkim |
2.10.3-6 |
The OpenDKIM daemon application and the opendkim-genkey Perl script for generating public/private key pairs. |
|
opendkim-tools |
2.10.3-6 |
opendkim-genzone, opendkim-testkey and opendkim-testmsg tools. |
|
openfortivpn |
1.20.3-1 |
An open implementation of Fortinet's proprietary PPP+SSL VPN solution It spawns a pppd process and operates the communication between the gateway and this process. It is compatible with Fortinet VPNs. |
|
openldap-server |
2.6.8-2 |
This package contains server programs required to provide LDAP services. |
|
openldap-utils |
2.6.8-2 |
This package contains client programs required to access LDAP servers. |
|
openrtsp |
2024.06.26-1 |
LIVE555 Streaming Media (openRTSP) |
|
openssh-client |
9.8p1-2 |
OpenSSH client. |
|
openssh-client-utils |
9.8p1-2 |
OpenSSH client utilities. |
|
openssh-keygen |
9.8p1-2 |
OpenSSH keygen. |
|
openssh-moduli |
9.8p1-2 |
OpenSSH server moduli file. |
|
openssh-server |
9.8p1-2 |
OpenSSH server. |
|
openssh-server-pam |
9.8p1-2 |
OpenSSH server (with PAM support). |
|
openssh-sftp-client |
9.8p1-2 |
OpenSSH SFTP client. |
|
openssh-sftp-server |
9.8p1-2 |
OpenSSH SFTP server. |
|
openssl-util |
3.0.14-2 |
The OpenSSL Project is a collaborative effort to develop a robust, commercial-grade, full-featured, and Open Source toolkit implementing the Transport Layer Security (TLS) protocol as well as a full-strength general-purpose cryptography library. This package contains the OpenSSL command-line utility. |
|
openswan |
3.0.0-1 |
Openswan is an IPsec implementation for Linux. This package contains the Openswan user-land daemon. |
|
opentracker |
2021.08.23~110868ec-1 |
opentracker - An open and free bittorrent tracker opentracker is an open and free bittorrent tracker project. It aims for minimal resource usage and is intended to run at your wlan router. Currently it is deployed as an open and free tracker instance. Read our free and open tracker blog and announce your torrents there (but do not hesitate to setup your own free trackers!). This package contains the IPv4-build of opentracker. |
|
opentracker6 |
2021.08.23~110868ec-1 |
opentracker - An open and free bittorrent tracker opentracker is an open and free bittorrent tracker project. It aims for minimal resource usage and is intended to run at your wlan router. Currently it is deployed as an open and free tracker instance. Read our free and open tracker blog and announce your torrents there (but do not hesitate to setup your own free trackers!). This package contains the IPv6-build of opentracker. |
|
openvpn-easy-rsa |
3.1.3-1 |
CLI utility to build and manage a PKI CA. |
|
openvpn-openssl |
2.6.11-2 |
Open source VPN solution using OpenSSL |
|
oping |
1.10.0-3 |
Send ICMP echo request to network hosts |
|
opkg |
2022.02.24~d038e5b6-2 |
Lightweight package management system opkg is the opkg Package Management System, for handling installation and removal of packages on a system. It can recursively follow dependencies and download all packages necessary to install a particular package. opkg knows how to install both .ipk and .deb packages. |
|
oprofile |
1.4.0-1 |
A transparent low-overhead system-wide profiler. |
|
oprofile-utils |
1.4.0-1 |
OProfile System Profiler (extra utilities) |
|
opt-ndmsv2 |
1.0-17 |
opt-ndmsv2 is a metapackage to install Entware basic libraries and scripts on Keenetic routers. |
|
opus-tools |
0.2-1 |
This package provides command-line utilities to encode, inspect, and decode .opus files. |
|
oscam |
1.20-20240710-1 |
OSCam is an Open Source Conditional Access Module software, based on the very good MpCS version 0.9d. |
|
oscam-emu |
2018-04-18-r11420_r769-2 |
Open Source Conditional Access Module (+EMU) |
|
owfs |
3.2p4-2 |
OWFS is a suite of programs that designed to make the 1-wire bus and its devices easily accessible. The underlying principle is to create a virtual filesystem, with the unique ID being the directory, and the individual properties of the device are represented as simple files that can be read and written. Details of the individual slave or master design are hidden behind a consistent interface. The goal is to provide an easy set of tools for a software designer to create monitoring or control applications. There are some performance enhancements in the implementation, including data caching, parallel access to bus masters, and aggregation of device communication. Still the fundemental goal has been ease of use, flexibility and correctness rather than speed. This package contains the OWFS fuse filesystem. |
|
owftpd |
3.2p4-2 |
OWFS is a suite of programs that designed to make the 1-wire bus and its devices easily accessible. The underlying principle is to create a virtual filesystem, with the unique ID being the directory, and the individual properties of the device are represented as simple files that can be read and written. Details of the individual slave or master design are hidden behind a consistent interface. The goal is to provide an easy set of tools for a software designer to create monitoring or control applications. There are some performance enhancements in the implementation, including data caching, parallel access to bus masters, and aggregation of device communication. Still the fundemental goal has been ease of use, flexibility and correctness rather than speed. This package contains the OWFS ftp server. |
|
owhttpd |
3.2p4-2 |
OWFS is a suite of programs that designed to make the 1-wire bus and its devices easily accessible. The underlying principle is to create a virtual filesystem, with the unique ID being the directory, and the individual properties of the device are represented as simple files that can be read and written. Details of the individual slave or master design are hidden behind a consistent interface. The goal is to provide an easy set of tools for a software designer to create monitoring or control applications. There are some performance enhancements in the implementation, including data caching, parallel access to bus masters, and aggregation of device communication. Still the fundemental goal has been ease of use, flexibility and correctness rather than speed. This package contains the OWFS http server. |
|
owserver |
3.2p4-2 |
OWFS is a suite of programs that designed to make the 1-wire bus and its devices easily accessible. The underlying principle is to create a virtual filesystem, with the unique ID being the directory, and the individual properties of the device are represented as simple files that can be read and written. Details of the individual slave or master design are hidden behind a consistent interface. The goal is to provide an easy set of tools for a software designer to create monitoring or control applications. There are some performance enhancements in the implementation, including data caching, parallel access to bus masters, and aggregation of device communication. Still the fundemental goal has been ease of use, flexibility and correctness rather than speed. This package contains the OWFS network server. |
|
owshell |
3.2p4-2 |
OWFS is a suite of programs that designed to make the 1-wire bus and its devices easily accessible. The underlying principle is to create a virtual filesystem, with the unique ID being the directory, and the individual properties of the device are represented as simple files that can be read and written. Details of the individual slave or master design are hidden behind a consistent interface. The goal is to provide an easy set of tools for a software designer to create monitoring or control applications. There are some performance enhancements in the implementation, including data caching, parallel access to bus masters, and aggregation of device communication. Still the fundemental goal has been ease of use, flexibility and correctness rather than speed. This package contains the OWFS shell utilities. |
|
p0f |
3.09b-1 |
P0f is a tool that utilizes an array of sophisticated, purely passive traffic fingerprinting mechanisms to identify the players behind any incidental TCP/IP communications (often as little as a single normal SYN) without interfering in any way. |
|
p7zip |
16.02-3 |
Command line version of 7-zip for POSIX systems. |
|
pagekitec |
0.91.201110C-2 |
PageKite is a system for running publicly visible servers (generally web servers) on machines without a direct connection to the Internet, such as mobile devices or computers behind restrictive firewalls. PageKite works around NAT, firewalls and IP-address limitations by using a combination of tunnels and reverse proxies. This package provides an implementation of the PageKite Protocol in C, optimized for high-performance or embedded applications. This package contains a basic backend useful for exposing http/ssh servers. Basic UCI support for configuring this backend is also included. |
|
palantir |
2.8pre3-2 |
Palantir is a Linux-based streaming system designed to transmit live video, audio and data over a TCP/IP network, as well as to control remote devices. |
|
par2cmdline |
0.8.1-1 |
par2cmdline is a PAR 2.0 compatible file verification and repair tool. |
|
parted |
3.6-1 |
GNU Parted manipulates partition tables. This is useful for creating space for new operating systems, reorganizing disk usage, copying data on hard disks and disk imaging. |
|
partx-utils |
2.40.1-1 |
contains partx, addpart, delpart |
|
patch |
2.7.6-7a |
The Patch package contains a program for modifying or creating files by applying a "patch" file typically created by the diff program. |
|
patchelf |
0.18.0-1 |
A small utility to modify the dynamic linker and RPATH of ELF executables. |
|
pcal |
4.11.0-1 |
PCAL is a calendar-generation program which produce nice-looking PostScript output. |
|
pciids |
0.383-1 |
PCI ID list |
|
pciutils |
3.12.0-2 |
contains collection of programs for inspecting and manipulating configuration of PCI devices |
|
pcsc-tools |
1.7.1-1 |
Tools that are used to test a PC/SC driver, card or reader. Only includes pcsc_scan without ATR analysis for now. |
|
pcscd |
2.2.3-2 |
The purpose of PC/SC Lite is to provide a Windows(R) SCard interface in a very small form factor for communicating to smart cards and smart cards readers. . This package contains the PC/SC daemon. |
|
perl |
5.40.0-1 |
Perl is a stable, cross platform programming language. It is used for mission critical projects in the public and private sectors and is widely used to program web applications of all needs. |
|
perl-cgi |
4.64+perl5.40-1 |
Handle Common Gateway Interface requests and responses |
|
perl-compress-bzip2 |
2.28+perl5.40-2 |
Perl interface to bzip2 compression library |
|
perl-dbd-pg |
3.18.0+perl5.40-2 |
PostgreSQL database driver for the DBI module |
|
perl-dbi |
1.643+perl5.40-2 |
Database independent interface for Perl |
|
perl-dev |
5.40.0-1 |
Perl development files |
|
perl-device-serialport |
1.04+perl5.40-5 |
A POSIX-based version of the Win32::SerialPort module that provides modem support to Perl applications |
|
perl-encode-locale |
1.05+perl5.40-3 |
Determine the locale encoding |
|
perl-file-listing |
6.04+perl5.40-3 |
Parse directory listing |
|
perl-html-form |
6.07+perl5.40-2 |
Class that represents an HTML form element |
|
perl-html-parser |
3.75+perl5.40-2 |
A collection of modules that parse HTML text documents |
|
perl-html-tagset |
3.20+perl5.40-5 |
Data tables pertaining to HTML |
|
perl-html-tree |
3.23+perl5.40-6 |
Represent and create HTML syntax trees |
|
perl-http-cookies |
6.08+perl5.40-2 |
HTTP cookie jars |
|
perl-http-daemon |
6.06+perl5.40-2 |
A simple http server class |
|
perl-http-date |
6.05+perl5.40-3 |
Date conversion routines |
|
perl-http-message |
6.22+perl5.40-2 |
HTTP style messages |
|
perl-http-negotiate |
6.01+perl5.40-3 |
Choose a variant to serve |
|
perl-http-server-simple |
0.52+perl5.40-2 |
Lightweight HTTP server |
|
perl-image-exiftool |
12.87+perl5.40-1 |
Perl library and command-line application for reading, writing and editing meta information |
|
perl-io-html |
1.001+perl5.40-3 |
Open an HTML file with automatic charset detection |
|
perl-lockfile-simple |
0.208+perl5.40-5 |
Simple advisory file locking |
|
perl-lwp-mediatypes |
6.04+perl5.40-2 |
Guess media type for a file or a URL |
|
perl-net-http |
6.19+perl5.40-2 |
Low-level HTTP connection (client) |
|
perl-net-telnet |
3.04+perl5.40-5 |
Telnet client |
|
perl-sub-uplevel |
0.2800+perl5.40-2 |
Apparently run a function in a higher stack frame |
|
perl-test-harness |
3.42+perl5.40-2 |
Perl Test Harness |
|
perl-test-warn |
0.36+perl5.40-2 |
Perl extension to test methods for warnings |
|
perl-text-csv_xs |
1.53+perl5.40-2 |
Text comma-separated values manipulation routines |
|
perl-try-tiny |
0.31+perl5.40-2 |
Minimal try/catch with proper preservation of /home/me/E/bin/targets/mipsel-3.4/generic-glibc/packages/perl-try-tiny_0.31+perl5.40-2_mipsel-3.4.ipk |
|
perl-uri |
1.76+perl5.40-2 |
Manipulates and accesses URI strings |
|
perl-www |
6.43+perl5.40-3 |
WWW client/server library for Perl (aka LWP) |
|
perl-www-curl |
4.17+perl5.40-8 |
Perl bindings to libcurl |
|
perl-www-mechanize |
1.96+perl5.40-2 |
Perl WWW Mechanize |
|
perl-www-robotrules |
6.02+perl5.40-3 |
database of robots.txt-derived permissions |
|
perlbase-anydbm-file |
5.40.0-1 |
AnyDBM_File perl module |
|
perlbase-app |
5.40.0-1 |
app perl module |
|
perlbase-archive |
5.40.0-1 |
Archive perl module |
|
perlbase-attribute |
5.40.0-1 |
Attribute perl module |
|
perlbase-attributes |
5.40.0-1 |
attributes perl module |
|
perlbase-autodie |
5.40.0-1 |
autodie perl module |
|
perlbase-autoloader |
5.40.0-1 |
AutoLoader perl module |
|
perlbase-autosplit |
5.40.0-1 |
AutoSplit perl module |
|
perlbase-autouse |
5.40.0-1 |
autouse perl module |
|
perlbase-b |
5.40.0-1 |
B perl module |
|
perlbase-base |
5.40.0-1 |
base perl module |
|
perlbase-benchmark |
5.40.0-1 |
Benchmark perl module |
|
perlbase-bigint |
5.40.0-1 |
bigint perl module |
|
perlbase-bignum |
5.40.0-1 |
bignum perl module |
|
perlbase-blib |
5.40.0-1 |
blib perl module |
|
perlbase-bytes |
5.40.0-1 |
bytes perl module |
|
perlbase-charnames |
5.40.0-1 |
charnames perl module |
|
perlbase-class |
5.40.0-1 |
Class perl module |
|
perlbase-compress |
5.40.0-1 |
Compress perl module |
|
perlbase-config |
5.40.0-1 |
Config perl module |
|
perlbase-cpan |
5.40.0-1 |
CPAN perl module |
|
perlbase-cwd |
5.40.0-1 |
Cwd perl module |
|
perlbase-data |
5.40.0-1 |
Data perl module |
|
perlbase-db |
5.40.0-1 |
DB perl module |
|
perlbase-db-file |
5.40.0-1 |
DB_File perl module |
|
perlbase-dbm-filter |
5.40.0-1 |
DBM_Filter perl module |
|
perlbase-devel |
5.40.0-1 |
Devel perl module |
|
perlbase-diagnostics |
5.40.0-1 |
diagnostics perl module |
|
perlbase-digest |
5.40.0-1 |
Digest perl module |
|
perlbase-dirhandle |
5.40.0-1 |
DirHandle perl module |
|
perlbase-dumpvalue |
5.40.0-1 |
Dumpvalue perl module |
|
perlbase-dumpvar |
5.40.0-1 |
dumpvar perl module |
|
perlbase-dynaloader |
5.40.0-1 |
DynaLoader perl module |
|
perlbase-encode |
5.40.0-1 |
Encode perl module |
|
perlbase-encoding |
5.40.0-1 |
encoding perl module |
|
perlbase-english |
5.40.0-1 |
English perl module |
|
perlbase-env |
5.40.0-1 |
Env perl module |
|
perlbase-errno |
5.40.0-1 |
Errno perl module |
|
perlbase-essential |
5.40.0-1 |
essential perl module |
|
perlbase-experimental |
5.40.0-1 |
experimental perl module |
|
perlbase-extutils |
5.40.0-1 |
ExtUtils perl module |
|
perlbase-fatal |
5.40.0-1 |
Fatal perl module |
|
perlbase-fcntl |
5.40.0-1 |
Fcntl perl module |
|
perlbase-feature |
5.40.0-1 |
feature perl module |
|
perlbase-fields |
5.40.0-1 |
fields perl module |
|
perlbase-file |
5.40.0-1 |
File perl module |
|
perlbase-filecache |
5.40.0-1 |
FileCache perl module |
|
perlbase-filehandle |
5.40.0-1 |
FileHandle perl module |
|
perlbase-filetest |
5.40.0-1 |
filetest perl module |
|
perlbase-filter |
5.40.0-1 |
Filter perl module |
|
perlbase-findbin |
5.40.0-1 |
FindBin perl module |
|
perlbase-gdbm-file |
5.40.0-1 |
GDBM_File perl module |
|
perlbase-getopt |
5.40.0-1 |
Getopt perl module |
|
perlbase-hash |
5.40.0-1 |
Hash perl module |
|
perlbase-http-tiny |
5.40.0-1 |
http-tiny perl module |
|
perlbase-i18n |
5.40.0-1 |
I18N perl module |
|
perlbase-if |
5.40.0-1 |
if perl module |
|
perlbase-integer |
5.40.0-1 |
integer perl module |
|
perlbase-io |
5.40.0-1 |
IO perl module |
|
perlbase-ipc |
5.40.0-1 |
IPC perl module |
|
perlbase-json-pp |
5.40.0-1 |
json-pp perl module |
|
perlbase-less |
5.40.0-1 |
less perl module |
|
perlbase-list |
5.40.0-1 |
List perl module |
|
perlbase-locale |
5.40.0-1 |
Locale perl module |
|
perlbase-math |
5.40.0-1 |
Math perl module |
|
perlbase-memoize |
5.40.0-1 |
Memoize perl module |
|
perlbase-meta-notation |
5.40.0-1 |
meta_notation module |
|
perlbase-mime |
5.40.0-1 |
MIME perl module |
|
perlbase-module |
5.40.0-1 |
Module perl module |
|
perlbase-mro |
5.40.0-1 |
mro perl module |
|
perlbase-net |
5.40.0-1 |
Net perl module |
|
perlbase-next |
5.40.0-1 |
NEXT perl module |
|
perlbase-o |
5.40.0-1 |
O perl module |
|
perlbase-opcode |
5.40.0-1 |
Opcode perl module |
|
perlbase-open |
5.40.0-1 |
open perl module |
|
perlbase-ops |
5.40.0-1 |
ops perl module |
|
perlbase-ostype |
5.40.0-1 |
OSType perl module |
|
perlbase-params |
5.40.0-1 |
Params perl module |
|
perlbase-perl5db |
5.40.0-1 |
perl5db perl module |
|
perlbase-perlio |
5.40.0-1 |
PerlIO perl module |
|
perlbase-pod |
5.40.0-1 |
Pod perl module |
|
perlbase-posix |
5.40.0-1 |
POSIX perl module |
|
perlbase-re |
5.40.0-1 |
re perl module |
|
perlbase-safe |
5.40.0-1 |
Safe perl module |
|
perlbase-scalar |
5.40.0-1 |
Scalar perl module |
|
perlbase-sdbm-file |
5.40.0-1 |
SDBM_File perl module |
|
perlbase-search |
5.40.0-1 |
Search perl module |
|
perlbase-selectsaver |
5.40.0-1 |
SelectSaver perl module |
|
perlbase-selfloader |
5.40.0-1 |
SelfLoader perl module |
|
perlbase-sigtrap |
5.40.0-1 |
sigtrap perl module |
|
perlbase-socket |
5.40.0-1 |
Socket perl module |
|
perlbase-sort |
5.40.0-1 |
sort perl module |
|
perlbase-storable |
5.40.0-1 |
Storable perl module |
|
perlbase-symbol |
5.40.0-1 |
Symbol perl module |
|
perlbase-sys |
5.40.0-1 |
Sys perl module |
|
perlbase-tap |
5.40.0-1 |
TAP perl module |
|
perlbase-term |
5.40.0-1 |
Term perl module |
|
perlbase-test |
5.40.0-1 |
Test perl module |
|
perlbase-text |
5.40.0-1 |
Text perl module |
|
perlbase-thread |
5.40.0-1 |
Thread perl module |
|
perlbase-threads |
5.40.0-1 |
threads perl module |
|
perlbase-tie |
5.40.0-1 |
Tie perl module |
|
perlbase-time |
5.40.0-1 |
Time perl module |
|
perlbase-unicode |
5.40.0-1 |
Unicode perl module |
|
perlbase-unicore |
5.40.0-1 |
unicore perl module |
|
perlbase-universal |
5.40.0-1 |
UNIVERSAL perl module |
|
perlbase-user |
5.40.0-1 |
User perl module |
|
perlbase-utf8 |
5.40.0-1 |
utf8 perl module |
|
perlbase-version |
5.40.0-1 |
version perl module |
|
perlbase-xsloader |
5.40.0-1 |
XSLoader perl module |
|
pgsql-cli |
15.6-1 |
Command Line Interface (CLI) to PostgreSQL databases. |
|
pgsql-cli-extra |
15.6-1 |
Command Line extras for PostgreSQL databases. |
|
pgsql-server |
15.6-1 |
PostgreSQL databases Server. |
|
phodav |
3.0-1 |
Phodav was initially developed as a filesharing mechanism for Spice, but it is generic enough to be reused in other projects, in particular in the GNOME desktop. |
|
php7 |
|
.27-1 |
|
php7-cgi |
|
.27-1 |
|
php7-cli |
|
.27-1 |
|
php7-fastcgi |
|
.27-1 |
|
php7-mod-curl |
|
.27-1 |
|
php7-mod-dom |
|
.27-1 |
|
php7-mod-exif |
|
.27-1 |
|
php7-mod-gd |
|
.27-1 |
|
php7-mod-json |
|
.27-1 |
|
php7-mod-mbstring |
|
.27-1 |
|
php7-mod-mysqli |
|
.27-1 |
|
php7-mod-mysqlnd |
|
.27-1 |
|
php7-mod-openssl |
|
.27-1 |
|
php7-mod-pdo |
|
.27-1 |
|
php7-mod-pdo-mysql |
|
.27-1 |
|
php7-mod-session |
|
.27-1 |
|
php7-mod-simplexml |
|
.27-1 |
|
php7-mod-xml |
|
.27-1 |
|
php7-mod-xmlreader |
|
.27-1 |
|
php7-mod-xmlwriter |
|
.27-1 |
|
php7-mod-zip |
|
.27-1 |
|
php8 |
8.3.8-2 |
PHP is a widely-used general-purpose scripting language that is especially suited for Web development and can be embedded into HTML. This package contains only the PHP config file. You must actually choose your PHP flavour (cli, cgi or fastcgi). Please note, that installing php5 and php8 in parallel on the same target is not supported in OpenWrt/LEDE/Entware. |
|
php8-cgi |
8.3.8-2 |
PHP is a widely-used general-purpose scripting language that is especially suited for Web development and can be embedded into HTML. This package contains the CGI version of the PHP8 interpreter. |
|
php8-cli |
8.3.8-2 |
PHP is a widely-used general-purpose scripting language that is especially suited for Web development and can be embedded into HTML. This package contains the CLI version of the PHP8 interpreter. |
|
php8-fastcgi |
8.3.8-2 |
As FastCGI support is now a core feature the php8-fastcgi package now depends on the php8-cgi package, containing just the startup script. |
|
php8-fpm |
8.3.8-2 |
PHP is a widely-used general-purpose scripting language that is especially suited for Web development and can be embedded into HTML. This package contains the FastCGI Process Manager of the PHP8 interpreter. |
|
php8-mod-bcmath |
8.3.8-2 |
Bcmath shared module |
|
php8-mod-calendar |
8.3.8-2 |
Calendar shared module |
|
php8-mod-ctype |
8.3.8-2 |
Ctype shared module |
|
php8-mod-curl |
8.3.8-2 |
cURL shared module |
|
php8-mod-dom |
8.3.8-2 |
DOM shared module |
|
php8-mod-exif |
8.3.8-2 |
EXIF shared module |
|
php8-mod-fileinfo |
8.3.8-2 |
Fileinfo shared module |
|
php8-mod-filter |
8.3.8-2 |
Filter shared module |
|
php8-mod-ftp |
8.3.8-2 |
FTP shared module |
|
php8-mod-gd |
8.3.8-2 |
GD graphics shared module |
|
php8-mod-gettext |
8.3.8-2 |
Gettext shared module |
|
php8-mod-gmp |
8.3.8-2 |
GMP shared module |
|
php8-mod-iconv |
8.3.8-2 |
iConv shared module |
|
php8-mod-imap |
8.3.8-2 |
IMAP shared module |
|
php8-mod-intl |
8.3.8-2 |
Note that this package depends in ICU library which is built without data by default. This is to satisfy programs build and run dependencies but to keep the installed footprint small on the target system(s). However, the data is required to make the ICU library useful - and thus directly affects PHPs ICU extension, too - so consider to also select/install package 'icu-full-data'. |
|
php8-mod-ldap |
8.3.8-2 |
LDAP shared module |
|
php8-mod-mbstring |
8.3.8-2 |
MBString shared module |
|
php8-mod-mysqli |
8.3.8-2 |
MySQL Improved Extension shared module |
|
php8-mod-mysqlnd |
8.3.8-2 |
MySQL Native Driver shared module |
|
php8-mod-opcache |
8.3.8-2 |
OPcache shared module |
|
php8-mod-openssl |
8.3.8-2 |
OpenSSL shared module |
|
php8-mod-pcntl |
8.3.8-2 |
PCNTL shared module |
|
php8-mod-pdo |
8.3.8-2 |
PHP Data Objects shared module |
|
php8-mod-pdo-mysql |
8.3.8-2 |
PDO driver for MySQL shared module |
|
php8-mod-pdo-pgsql |
8.3.8-2 |
PDO driver for PostgreSQL shared module |
|
php8-mod-pdo-sqlite |
8.3.8-2 |
PDO driver for SQLite 3.x shared module |
|
php8-mod-pgsql |
8.3.8-2 |
PostgreSQL shared module |
|
php8-mod-phar |
8.3.8-2 |
Phar Archives shared module |
|
php8-mod-session |
8.3.8-2 |
Session shared module |
|
php8-mod-shmop |
8.3.8-2 |
Shared Memory shared module |
|
php8-mod-simplexml |
8.3.8-2 |
SimpleXML shared module |
|
php8-mod-snmp |
8.3.8-2 |
SNMP shared module |
|
php8-mod-soap |
8.3.8-2 |
SOAP shared module |
|
php8-mod-sockets |
8.3.8-2 |
Sockets shared module |
|
php8-mod-sodium |
8.3.8-2 |
Sodium shared module |
|
php8-mod-sqlite3 |
8.3.8-2 |
SQLite3 shared module |
|
php8-mod-sysvmsg |
8.3.8-2 |
System V messages shared module |
|
php8-mod-sysvsem |
8.3.8-2 |
System V shared memory shared module |
|
php8-mod-sysvshm |
8.3.8-2 |
System V semaphore shared module |
|
php8-mod-tokenizer |
8.3.8-2 |
Tokenizer shared module |
|
php8-mod-xml |
8.3.8-2 |
XML shared module |
|
php8-mod-xmlreader |
8.3.8-2 |
XMLReader shared module |
|
php8-mod-xmlwriter |
8.3.8-2 |
XMLWriter shared module |
|
php8-mod-zip |
8.3.8-2 |
ZIP shared module |
|
php8-pecl-apcu |
5.1.23-1 |
APCu - APC User Cache |
|
php8-pecl-dio |
0.2.0-2 |
Direct I/O functions |
|
php8-pecl-event |
3.1.3-1 |
Provides interface to libevent library |
|
php8-pecl-gmagick |
2.0.6RC1-1 |
Provides a wrapper to the GraphicsMagick library |
|
php8-pecl-http |
4.2.4-1 |
Extended HTTP Support |
|
php8-pecl-imagick |
3.7.0-2 |
Image Processing (ImageMagick binding) |
|
php8-pecl-mcrypt |
1.0.7-1 |
Bindings for the libmcrypt library |
|
php8-pecl-raphf |
2.0.1-2 |
Resource and persistent handles factory |
|
php8-pecl-redis |
6.0.2-1 |
PHP extension for interfacing with Redis |
|
php8-pecl-ssh2 |
1.4.1-1 |
Bindings for the libssh2 library |
|
php8-pecl-trader |
0.5.1-1 |
Technical Analysis for traders |
|
php8-pecl-xdebug |
3.3.1-1 |
Xdebug extension |
|
picocom |
3.1-5 |
minimal dumb-terminal emulation program |
|
pigz |
2.8-1 |
pigz |
|
pimd |
2.3.2-1 |
pimd is a lightweight standalone PIM-SM/SSM v2 multicast routing daemon. It is the original USC (netweb/catarina.usc.edu) implementation of the protocol, RFC 2362. Today pimd strives for RFC 4601 compliance, with the v2.3.0 release supporting both PIM-SSM and IGMPv3. |
|
pinentry |
1.3.1-1 |
pinentry is a small collection of dialog programs that allow GnuPG to read passphrases and PIN numbers in a secure manner. There are versions for the common GTK and Qt toolkits as well as for the text terminal (Curses). |
|
pingu |
1.5-1 |
Pingu is a daemon that takes care of policy routing and fail-over in multi ISP setups. Support for DHCP, PPP, ISP failover, Load-balancing (nexthop), optional route rule based on fwmark, run script when ISP goes up/down. |
|
pixelserv-tls |
2.4-2 |
pixelserv-tls is a tiny bespoke webserver for adblock with HTTP/1.1 and HTTPS support |
|
pixiewps |
1.4.2-2 |
Pixiewps is a tool written in C used to bruteforce offline the WPS PIN exploiting the low or non-existing entropy of some Access Points, the so-called "pixie-dust attack" discovered by Dominique Bongard in summer 2014. It is meant for educational purposes only. |
|
pkg-config |
0.29.2-3 |
pkg-config is a helper tool used when compiling applications and libraries. It helps you insert the correct compiler options on the command line so an application can use gcc -o test test.cpkg-config --libs --cflags glib-2.0 for instance, rather than hard-coding values on where to find glib (or other libraries). |
|
playsip |
2024.06.26-1 |
LIVE555 Streaming Media (playSIP) |
|
polipo |
1.1.1-2 |
Polipo is a small and fast caching web proxy (a web cache, an HTTP proxy, a proxy server). While Polipo was designed to be used by one person or a small group of people, there is nothing that prevents it from being used by a larger group. |
|
poorbox |
1.36.1-1 |
The Swiss Army Knife of embedded Linux. It slices, it dices, it makes Julian Fries. |
|
poppler-utils |
21.08.0-5 |
Poppler is a PDF rendering utilities based on the xpdf-3.0. |
|
portaudio |
190600_20161030-2 |
PortAudio is a free, cross-platform, open-source, audio I/O library. It lets you write simple audio programs in 'C' or C++ that will compile and run on many platforms including Windows, Macintosh OS X, and Unix (OSS/ALSA). It is intended to promote the exchange of audio software between developers on different platforms. Many applications use PortAudio for Audio I/O. |
|
portspoof |
1.3-1 |
The Portspoof program primary goal is to enhance OS security through a set of few techniques: all TCP ports are always open, every open TCP port emulates a services. Portspoof can be used as an 'Exploitation Framework Frontend', that turns your system into responsive and aggressive machine. |
|
postfix |
3.8.2-2 |
Postfix is Wietse Venema's mailer that started life as an alternative to the widely-used Sendmail program. Postfix attempts to be fast, easy to administer, and secure, while at the same time being sendmail compatible enough to not upset existing users. Thus, the outside has a sendmail-ish flavor, but the inside is completely different. |
|
ppp |
2.4.8_git20201003-2b |
This package contains the PPP (Point-to-Point Protocol) daemon. |
|
ppp-mod-pppoa |
2.4.8_git20201003-2b |
This package contains a PPPoA (PPP over ATM) plugin for ppp. |
|
ppp-mod-pppoe |
2.4.8_git20201003-2b |
This package contains a PPPoE (PPP over Ethernet) plugin for ppp. |
|
ppp-mod-pppol2tp |
2.4.8_git20201003-2b |
This package contains a PPPoL2TP (PPP over L2TP) plugin for ppp. |
|
ppp-mod-pptp |
2.4.8_git20201003-2b |
This package contains a PPtP plugin for ppp. |
|
ppp-mod-radius |
2.4.8_git20201003-2b |
This package contains a RADIUS (Remote Authentication Dial-In User Service) plugin for ppp. |
|
pppdump |
2.4.8_git20201003-2b |
This package contains an utility to read PPP record file. |
|
pppoe-discovery |
2.4.8_git20201003-2b |
This tool performs the same discovery process as pppoe, but does not initiate a session. Can be useful to debug pppoe. |
|
pppstats |
2.4.8_git20201003-2b |
This package contains an utility to report PPP statistics. |
|
pptpd |
1.4.0-6 |
PopTop pptp server |
|
privoxy |
3.0.34-1 |
Privoxy WEB Proxy - Homepage: www.privoxy.org |
|
prlimit |
2.40.1-1 |
Given a process id and one or more resources, prlimit tries to retrieve and/or modify the limits. |
|
procps-ng |
4.0.4-1 |
procps is a set of command line and full-screen utilities that provide information out of the pseudo-filesystem most commonly located at /proc. This filesystem provides a simple interface to the kernel data structures. The programs of procps generally concentrate on the structures that describe the processess running on the system. NOTE: some utilities provided by procps-ng packages (ps, uptime, kill, ...) are installed as busybox applets, by default. Conflicting applets should be removed from the build to avoid file conflicts. |
|
procps-ng-free |
4.0.4-1 |
Installs the applet free. |
|
procps-ng-kill |
4.0.4-1 |
Installs the applet kill. |
|
procps-ng-pgrep |
4.0.4-1 |
Installs the applet pgrep. |
|
procps-ng-pkill |
4.0.4-1 |
Installs the applet pkill. |
|
procps-ng-pmap |
4.0.4-1 |
Installs the applet pmap. |
|
procps-ng-ps |
4.0.4-1 |
Installs the applet ps. |
|
procps-ng-pwdx |
4.0.4-1 |
Installs the applet pwdx. |
|
procps-ng-skill |
4.0.4-1 |
Installs the applet skill. |
|
procps-ng-slabtop |
4.0.4-1 |
Installs the applet slabtop. |
|
procps-ng-snice |
4.0.4-1 |
Installs the applet snice. |
|
procps-ng-sysctl |
4.0.4-1 |
Installs the applet sysctl. |
|
procps-ng-tload |
4.0.4-1 |
Installs the applet tload. |
|
procps-ng-top |
4.0.4-1 |
Installs the applet top. |
|
procps-ng-uptime |
4.0.4-1 |
Installs the applet uptime. |
|
procps-ng-vmstat |
4.0.4-1 |
Installs the applet vmstat. |
|
procps-ng-w |
4.0.4-1 |
Installs the applet w. |
|
procps-ng-watch |
4.0.4-1 |
Installs the applet watch. |
|
procs |
0.14.5-1 |
procs is a replacement for ps written in Rust. |
|
proftpd |
1.3.8-1 |
ProFTPD FTP server |
|
progress |
0.15-1 |
This tool can be described as a Tiny, Dirty, Linux-and-OSX-Only C command that looks for coreutils basic commands (cp, mv, dd, tar, gzip/gunzip, cat, etc.) currently running on your system and displays the percentage of copied data. It can also show estimated time and throughput, and provide a "top-like" mode (monitoring). . It simply scans `/proc` for interesting commands, and then looks at directories `fd` and `fdinfo` to find opened files and seek positions, and reports status for the largest file. . It's very light, and compatible with virtually any command. This program was formerly known as 'cv' on github. |
|
prometheus |
2.53.1-1 |
Prometheus, a Cloud Native Computing Foundation project, is a systems and service monitoring system. It collects metrics from configured targets at given intervals, evaluates rule expressions, displays the results, and can trigger alerts when specified conditions are observed. |
|
prometheus-blackbox-exporter |
0.25.0-1 |
The blackbox exporter allows blackbox probing of endpoints over HTTP, HTTPS, DNS, TCP, ICMP and gRPC. |
|
prometheus-collectd-exporter |
0.6.0-1 |
A server that accepts collectd stats via HTTP POST and exports them via HTTP for Prometheus consumption. |
|
prometheus-haproxy-exporter |
0.15.0-1 |
Simple server that scrapes HAProxy stats and exports them via HTTP for Prometheus consumption. |
|
prometheus-node-exporter |
1.8.2-1 |
Prometheus exporter for hardware and OS metrics exposed by *NIX kernels, written in Go with pluggable metric collectors. |
|
prometheus-snmp-exporter |
0.26.0-1 |
This exporter is the recommended way to expose SNMP data in a format which Prometheus can ingest. |
|
prometheus-statsd-exporter |
0.26.1-1 |
statsd_exporter receives StatsD-style metrics and exports them as Prometheus metrics. |
|
prosody |
0.11.13-1 |
Prosody is an exciting new server for Jabber/XMPP written in Lua. It aims to be easy to use, and light on resources |
|
protobuf |
3.17.3-2 |
Protocol Buffers are a way of encoding structured data in an efficient yet extensible format. Google uses Protocol Buffers for almost all of its internal RPC protocols and file formats. This package provides the libprotoc, libprotobuf, and libprotobuf-lite libraries. For a much smaller protobuf package, see "protobuf-lite". |
|
protobuf-lite |
3.17.3-2 |
Protocol Buffers are a way of encoding structured data in an efficient yet extensible format. Google uses Protocol Buffers for almost all of its internal RPC protocols and file formats. This package provides the libprotobuf-lite library. |
|
ps3netsrv |
1.47.46-1 |
C++ implementation of the ps3netsrv server (no SSL) |
|
ps3netsrv-mbedtls |
1.47.46-1 |
C++ implementation of the ps3netsrv server (Mbed TLS) |
|
psmisc |
23.7-1 |
psmisc is a set of additional small useful utilities that use the proc filesystem like fuser, killall, prtstat, pstree. |
|
ptokax |
0.5.3.0-1 |
PtokaX Direct Connect Hub is a multi-platform server application for Neo-Modus Direct Connect Peer-To-Peer sharing network. |
|
pulseaudio-daemon |
17.0-1 |
PulseAudio (formerly Polypaudio) is a cross-platform, networked sound server. |
|
pulseaudio-profiles |
17.0-1 |
Profiles for Pulseaudio |
|
pulseaudio-tools |
17.0-1 |
Tools for Pulseaudio |
|
pureftpd |
1.0.51-2 |
Pure-FTPd is a fast, production-quality, standard-conformant FTP server, based upon Troll-FTPd. |
|
pv |
1.6.6-1 |
Pipe Viewer is a terminal-based tool for monitoring the progress of data through a pipeline. It can be inserted into any normal pipeline between two processes to give a visual indication of how quickly data is passing through, how long it has taken, how near to completion it is, and an estimate of how long it will be until completion. |
|
pwnat |
0.3.1-beta-1 |
The only tool to punch holes through firewalls/NATs where both clients and server can be behind separate NATs without any 3rd party involvement. |
|
python3 |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package installs almost all parts of the standard Python installation. |
|
python3-appdirs |
1.4.4-1 |
Determining platform-specific dirs |
|
python3-asgiref |
3.7.2-1 |
ASGI is a standard for Python asynchronous web apps and servers to communicate with each other, and positioned as an asynchronous successor to WSGI. |
|
python3-asyncio |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the asyncio module. |
|
python3-attrs |
23.1.0-1 |
attrs is an MIT-licensed Python package with class decorators that ease the chores of implementing the most common attribute-related object protocols. |
|
python3-automat |
22.10.0-1 |
Automat is a library for concise, idiomatic Python expression of finite-state automata (particularly deterministic finite-state transducers). |
|
python3-base |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains only the interpreter and the bare minimum for the interpreter to start. |
|
python3-bcrypt |
4.1.2-1 |
Good password hashing for your software and your servers. |
|
python3-certifi |
2024.2.2-1 |
Certifi provides Mozilla's carefully curated collection of Root Certificates for validating the trustworthiness of SSL certificates while verifying the identity of TLS hosts. |
|
python3-cffi |
1.16.0-1 |
Foreign Function Interface for Python calling C code. |
|
python3-cgi |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the cgi module. |
|
python3-cgitb |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the cgitb module. |
|
python3-chardet |
5.2.0-1 |
Universal encoding detector for Python |
|
python3-codecs |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains codecs and Unicode support. |
|
python3-constantly |
23.10.4-1 |
A library that provides symbolic constant support. It includes collections and constants with text, numeric, and bit flag values. Originally twisted.python.constants from the Twisted project. |
|
python3-cryptodome |
3.18.0-1 |
PyCryptodome is a self-contained Python package of low-level cryptographic primitives. |
|
python3-cryptography |
42.0.8-1 |
cryptography is a package which provides cryptographic recipes and primitives to Python developers. Our goal is for it to be your "cryptographic standard library". It supports Python 3.6+ and PyPy3 7.2+. |
|
python3-ctypes |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the ctypes module. |
|
python3-cups |
2.0.4-1 |
This is a Python bindings for the CUPS API, known as pycups. It was written for use with system-config-printer, but can be put to other uses as well. |
|
python3-curl |
7.45.2-3 |
PycURL is a Python interface to libcurl, the multiprotocol file transfer library. |
|
python3-dateutil |
2.9.0.post0-1 |
Extensions to the standard Python datetime module |
|
python3-dbm |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the dbm module. |
|
python3-decimal |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the decimal module. |
|
python3-defusedxml |
0.7.1-1 |
The defusedxml package contains several Python-only workarounds and fixes for denial of service and other vulnerabilities in Python’s XML libraries. |
|
python3-dev |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains files for building Python modules, extending the Python interpreter, or embedded Python in applications. |
|
python3-distutils |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the distutils module. |
|
python3-django |
5.0.6-1 |
The web framework for perfectionists with deadlines. |
|
python3-email |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the email module. |
|
python3-et_xmlfile |
1.1.0-1 |
An implementation of lxml.xmlfile for the standard library. It is based upon the xmlfile module from lxml with the aim of allowing code to be developed that will work with both libraries. |
|
python3-hyperlink |
21.0.0-1 |
Hyperlink provides a pure-Python implementation of immutable URLs. Based on RFC 3986 and 3987, the Hyperlink URL makes working with both URIs and IRIs easy. |
|
python3-idna |
3.6-1 |
A library to support the Internationalised Domain Names in Applications (IDNA) protocol as specified in RFC 5891. This version of the protocol is often referred to as "IDNA2008" and can produce different results from the earlier standard from 2003. |
|
python3-ifaddr |
0.2.0-1 |
ifaddr is a small Python library that allows you to find all the Ethernet and IP addresses of the computer. |
|
python3-incremental |
22.10.0-1 |
Incremental is a small library that versions your Python projects. |
|
python3-jdcal |
1.4.1-2 |
This module contains functions for converting between Julian dates and calendar dates. |
|
python3-lib2to3 |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the lib2to3 module. |
|
python3-libtorrent |
2.0.9-2 |
Rasterbar libtorrent is a C++ library that aims to be a good alternative to all the other bittorrent implementations around. This package contains Python 3 bindings for the libtorrent-rasterbar library. |
|
python3-light |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package installs the base interpreter package and contains the most commonly used parts of the standard library. |
|
python3-logging |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the logging module. |
|
python3-lxml |
5.2.2-1 |
lxml is a Pythonic, mature binding for the libxml2 and libxslt libraries. It provides safe and convenient access to these libraries using the ElementTree API. It extends the ElementTree API significantly to offer support for XPath, RelaxNG, XML Schema, XSLT, C14N and much more. |
|
python3-lzma |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the lzma module. |
|
python3-mako |
1.3.0-1 |
Mako is a template library written in Python. It provides a familiar, non-XML syntax which compiles into Python modules for maximum performance. Mako's syntax and API borrows from the best ideas of many others, including Django templates, Cheetah, Myghty, and Genshi. Conceptually, Mako is an embedded Python (i.e. Python Server Page) language, which refines the familiar ideas of componentized layout and inheritance to produce one of the most straightforward and flexible models available, while also maintaining close ties to Python calling and scoping semantics. |
|
python3-markupsafe |
2.1.3-1a |
MarkupSafe implements a text object that escapes characters so it is safe to use in HTML and XML. Characters that have special meanings are replaced so that they display as the actual characters. This mitigates injection attacks, meaning untrusted user input can safely be displayed on a page. |
|
python3-msgpack |
1.0.7-1 |
MessagePack is an efficient binary serialization format. It lets you exchange data among multiple languages like JSON. |
|
python3-multiprocessing |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the multiprocessing module. |
|
python3-ncurses |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the ncurses module. |
|
python3-newt |
0.52.24-1 |
Newt is a programming library for color text mode, widget based user interfaces. Newt can be used to add stacked windows, entry widgets, checkboxes, radio buttons, labels, plain text fields, scrollbars, etc., to text mode user interfaces. Newt is based on the slang library. This is the Newt module for Python 3. |
|
python3-openpyxl |
3.0.10-1 |
A Python library to read/write Excel 2010 xlsx/xlsm files |
|
python3-openssl |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the ssl module. |
|
python3-orjson |
3.9.15-1 |
Fast, correct Python JSON library supporting dataclasses, datetimes, and numpy. |
|
python3-packaging |
23.2-1 |
The packaging project includes version handling, specifiers, markers, requirements, tags, utilities. |
|
python3-pillow |
10.1.0-1 |
The friendly PIL fork |
|
python3-pip |
23.3.1-1 |
pip is the package installer for Python. You can use pip to install packages from the Python Package Index and other indexes. |
|
python3-pkg-resources |
69.0.2-1 |
Setuptools is a fully-featured, actively-maintained, and stable library designed to facilitate packaging Python projects. It helps developers to easily share reusable code (in the form of a library) and programs (e.g., CLI/GUI tools implemented in Python), that can be installed with pip and uploaded to PyPI. This is the pkg_resources module of setuptools. |
|
python3-ply |
3.11-2 |
PLY is a 100% Python implementation of the common parsing tools lex and yacc. |
|
python3-psutil |
5.9.5-1 |
psutil is a cross-platform library for retrieving information on running processes and system utilization. |
|
python3-pyasn1 |
0.5.1-1 |
This is an implementation of ASN.1 types and codecs in Python programming language. It has been first written to support particular protocol (SNMP) but then generalized to be suitable for a wide range of protocols based on ASN.1 specification. |
|
python3-pyasn1-modules |
0.3.0-1 |
This is a small but growing collection of ASN.1 data structures expressed in Python terms using pyasn1 data model. |
|
python3-pycparser |
2.21-2 |
pycparser is a parser for the C language, written in pure Python. It is a module designed to be easily integrated into applications that need to parse C source code. |
|
python3-pydoc |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the pydoc module. |
|
python3-pymysql |
1.1.0-2 |
This package contains a pure-Python MySQL client library, based on PEP 249. |
|
python3-pyopenssl |
24.1.0-1 |
Python wrapper module around the OpenSSL library |
|
python3-pyparsing |
3.1.1-1 |
The pyparsing module is an alternative approach to creating and executing simple grammars, vs. the traditional lex/yacc approach, or the use of regular expressions. The pyparsing module provides a library of classes that client code uses to construct the grammar directly in Python code. |
|
python3-pytz |
2024.1-1 |
World timezone definitions, modern and historical |
|
python3-pyxdg |
0.28-1 |
a library supporting various freedesktop standards |
|
python3-rdiff-backup |
2.2.6-1 |
rdiff-backup backs up one directory to another, possibly over a network. The target directory ends up a copy of the source directory, but extra reverse diffs are stored in a special subdirectory of that target directory, so you can still recover files lost some time ago. The idea is to combine the best features of a mirror and an incremental backup. |
|
python3-readline |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the readline module. |
|
python3-regex |
2024.5.15-1 |
This new regex implementation is intended eventually to replace Python’s current re module implementation. |
|
python3-rencode |
1.0.6-3 |
The rencode module is similar to bencode from the BitTorrent project. |
|
python3-requests |
2.32.3-1 |
Requests is the only Non-GMO HTTP library for Python, safe for human consumption |
|
python3-rpds-py |
0.10.6-2 |
Python bindings to the Rust rpds crate for persistent data structures. |
|
python3-service-identity |
23.1.0-1 |
service_identity aspires to give you all the tools you need for verifying whether a certificate is valid for the intended purposes. |
|
python3-setproctitle |
1.3.3-1 |
A Python module to customize the process title. |
|
python3-setuptools |
69.0.2-1 |
Setuptools is a fully-featured, actively-maintained, and stable library designed to facilitate packaging Python projects. It helps developers to easily share reusable code (in the form of a library) and programs (e.g., CLI/GUI tools implemented in Python), that can be installed with pip and uploaded to PyPI. This is the main setuptools module. |
|
python3-six |
1.16.0-1 |
Six is a Python 2 and 3 compatibility library. It provides utility functions for smoothing over the differences between the Python versions with the goal of writing Python code that is compatible on both Python versions. See the documentation for more information on what is provided. |
|
python3-sqlite3 |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the sqlite3 module. |
|
python3-sqlparse |
0.4.4-1 |
sqlparse is a non-validating SQL parser for Python. It provides support for parsing, splitting and formatting SQL statements. |
|
python3-twisted |
23.10.0-1 |
Twisted is a networking engine written in Python, supporting numerous protocols. It contains a web server, numerous chat clients, chat servers, mail servers, and more. |
|
python3-typing-extensions |
4.9.0-1 |
The typing_extensions module serves two related purposes: * Enable use of new type system features on older Python versions. For example, typing.TypeGuard is new in Python 3.10, but typing_extensions allows users on previous Python versions to use it too. * Enable experimentation with new type system PEPs before they are accepted and added to the typing module. |
|
python3-ujson |
5.10.0-1 |
UltraJSON is an ultra fast JSON encoder and decoder written in pure C with bindings for Python 3.7+. |
|
python3-unittest |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the unittest module. |
|
python3-urllib |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the URL handling modules. |
|
python3-urllib3 |
2.0.4-1 |
HTTP library with thread-safe connection pooling, file post, and more. |
|
python3-uuid |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the uuid module. |
|
python3-uvloop |
0.19.0-1 |
uvloop is a fast, drop-in replacement of the built-in asyncio event loop. uvloop is implemented in Cython and uses libuv under the hood. |
|
python3-xml |
3.11.7-1 |
Python is an interpreted, interactive, object-oriented programming language. It incorporates modules, exceptions, dynamic typing, very high level dynamic data types, and classes. It supports multiple programming paradigms beyond object-oriented programming, such as procedural and functional programming. Python combines remarkable power with very clear syntax. It has interfaces to many system calls and libraries, as well as to various window systems, and is extensible in C or C++. It is also usable as an extension language for applications that need a programmable interface. Finally, Python is portable: it runs on many Unix variants including Linux and macOS, and on Windows. This package contains the XML modules. |
|
python3-yaml |
6.0.1-2 |
PyYAML is a YAML parser and emitter for the Python programming language. |
|
python3-zope-interface |
6.1-1 |
This package provides an implementation of "object interfaces" for Python. Interfaces are a mechanism for labeling objects as conforming to a given API or contract. So, this package can be considered as implementation of the Design By Contract methodology support in Python. |
|
qbittorrent |
4.6.5-1 |
qBittorrent is a bittorrent client programmed in C++ / Qt that uses libtorrent (sometimes called libtorrent-rasterbar) by Arvid Norberg. It aims to be a good alternative to all other bittorrent clients out there. qBittorrent is fast, stable and provides unicode support as well as many features. |
|
qmi-utils |
1.34.0-2 |
Utilities to talk to QMI enabled modems |
|
qpdf |
11.9.1-1 |
QPDF is a command-line program for transformations on PDF files. |
|
qrencode |
4.1.1-1 |
Qrencode is a C program for encoding data in a QR Code symbol, a kind of 2D symbology that can be scanned by handy terminals such as a mobile phone with CCD. The capacity of QR Code is up to 7000 digits or 4000 characters, and is highly robust. |
|
qt5-core |
5.15.14-1 |
Qt5 Core module |
|
qt5-network |
5.15.14-1 |
Qt5 Network module |
|
qt5-sql |
5.15.14-1 |
Qt5 Sql module |
|
qt5-xml |
5.15.14-1 |
Qt5 Xml module |
|
quagga |
1.2.4-2 |
A routing software package that provides TCP/IP based routing services with routing protocols support such as RIPv1, RIPv2, RIPng, OSPFv2, OSPFv3, BGP-4, and BGP-4+ |
|
quagga-bgpd |
1.2.4-2 |
BGPv4, BGPv4+, BGPv4- routing engine |
|
quagga-isisd |
1.2.4-2 |
IS-IS routing engine |
|
quagga-libospf |
1.2.4-2 |
OSPF library |
|
quagga-libzebra |
1.2.4-2 |
zebra library |
|
quagga-ospf6d |
1.2.4-2 |
OSPFv3 routing engine |
|
quagga-ospfd |
1.2.4-2 |
OSPFv2 routing engine |
|
quagga-ripd |
1.2.4-2 |
RIP routing engine |
|
quagga-ripngd |
1.2.4-2 |
RIPNG routing engine |
|
quagga-vtysh |
1.2.4-2 |
integrated shell for Quagga routing software |
|
quagga-watchquagga |
1.2.4-2 |
Quagga watchdog |
|
quagga-zebra |
1.2.4-2 |
Zebra daemon |
|
radare2 |
5.9.2-1 |
UNIX-like reverse engineering framework and command-line toolset. |
|
radlib |
2.12.0-1 |
radlib is a rapid application development library for unix multi-process applications. |
|
radvd |
2.19-1 |
radvd is the router advertisement daemon for IPv6. It listens to router solicitations and sends router advertisements as described in "Neighbor Discovery for IP Version 6 (IPv6)" (RFC 4861). With these advertisements hosts can automatically configure their addresses and some other parameters. They also can choose a default router based on these advertisements. |
|
radvdump |
2.19-1 |
radvdump prints out the contents of incoming router advertisements sent by radvd or some other software implementing (parts of) "Neighbor Discovery for IP Version 6 (IPv6)" (RFC 4861). |
|
rar2fs |
1.29.7-1 |
FUSE file system for reading RAR archives. |
|
rathole |
0.5.0-1 |
A lightweight and high-performance reverse proxy for NAT traversal, written in Rust. An alternative to frp and ngrok. |
|
rclone |
1.67.0-2 |
Rclone is a command line program to sync files and directories to and from: Google Drive Amazon S3 Openstack Swift / Rackspace cloud files / Memset Memstore Dropbox Google Cloud Storage Amazon Cloud Drive Microsoft One Drive Hubic Backblaze B2 Yandex Disk The local filesystem |
|
rcon |
0.6-1 |
Rcon is a command line application that can be used as a Source RCON client. It will send commands to the given server, and print the reply to stdout. |
|
rdfind |
1.6.0-1 |
Rdfind is a command line tool that finds duplicate files. It is useful for compressing backup directories or just finding duplicate files. It compares files based on their content, NOT on their file names. |
|
rdisc6 |
1.0.8-1 |
NDisc6 is a small collection of useful tools for IPv6 networking. rdisc6: ICMPv6 Router Discovery tool |
|
redis-cli |
6.2.14-1 |
Redis cli |
|
redis-server |
6.2.14-1 |
Redis server |
|
redis-utils |
6.2.14-1 |
Redis utilities |
|
redsocks |
0.5-2 |
Redsocks is a daemon running on the local system, that will transparently tunnel any TCP connection via a remote SOCKS4, SOCKS5 or HTTP proxy server. It uses the system firewall's redirection facility to intercept TCP connections, thus the redirection is system-wide, with fine-grained control, and does not depend on LD_PRELOAD libraries. Redsocks supports tunneling TCP connections and UDP packets. It has authentication support for both, SOCKS and HTTP proxies. Also included is a small DNS server returning answers with the "truncated" flag set for any UDP query, forcing the resolver to use TCP. |
|
remind |
04.03.07-1 |
Remind is a powerfull commadline reminder. |
|
rename |
2.40.1-1 |
rename will rename the specified files by replacing the first occurrence of expression in their name by replacement |
|
resize2fs |
1.47.0-2 |
Ext2 Filesystem resize utility |
|
resolveip |
2 |
This package contains the small resolveip utility which can be used by scripts to turn host names into numeric IP addresses. It supports IPv4 and IPv6 resolving and has a configurable timeout to guarantee a certain maximum runtime in case of slow or defunct DNS servers. |
|
restic-go |
0.16.4-1 |
restic is a backup program that is fast, efficient and secure. It supports the three major operating systems (Linux, macOS, Windows) and a few smaller ones (FreeBSD, OpenBSD). |
|
rev |
2.40.1-1 |
rev utility copies the specified files to the standard output, reversing the order of characters in every line. If no files are specified, the standard input is read. |
|
ripgrep |
14.1.0-1 |
ripgrep is a line-oriented search tool that recursively searches the current directory for a regex pattern while respecting gitignore rules. ripgrep has first class support on Windows, macOS and Linux. |
|
rng-tools |
6.15-2 |
Daemon for adding entropy to kernel entropy pool. By default it uses /dev/urandom as the source but the init script can be modified to use a hardware source like /dev/hwrng if present |
|
rpcapd |
1.10.4-1 |
Capture daemon to be controlled by a remote libpcap application |
|
rpcbind |
1.2.6-2 |
The rpcbind utility is a server that converts RPC program numbers into universal addresses. It must be running on the host to be able to make RPC calls on a server on that machine. Rpcbind replaces portmap for NFS v2/v3. It has more features, like ipv6 support. Note: Nfs4 only configurations can run without it. |
|
rrdcgi |
1.2.30-3a |
Round Robin Database (RRD) CGI graphing tool (v1.2.x) |
|
rrdcgi1 |
1.0.50-6 |
RRD is the Acronym for Round Robin Database. RRD is a system to store and display time-series data (i.e. network bandwidth, machine-room temperature, server load average). It stores the data in a very compact way that will not expand over time, and it presents useful graphs by processing the data to enforce a certain data density. It can be used either via simple wrapper scripts (from shell or Perl) or via frontends that poll network devices and put friendly user interface on it. This is version 1.0.x with cgilib-0.4, gd1.3 and libpng-1.0.9 linked into librrd.so. The library is much smaller compared to the 1.2.x version with separate dynamic linked libraries. This package contains the rrdcgi tool used to create web pages containing RRD graphs based on templates. |
|
rrdtool |
1.2.30-3a |
Round Robin Database (RRD) management tools (v1.2.x) |
|
rrdtool1 |
1.0.50-6 |
RRD is the Acronym for Round Robin Database. RRD is a system to store and display time-series data (i.e. network bandwidth, machine-room temperature, server load average). It stores the data in a very compact way that will not expand over time, and it presents useful graphs by processing the data to enforce a certain data density. It can be used either via simple wrapper scripts (from shell or Perl) or via frontends that poll network devices and put friendly user interface on it. This is version 1.0.x with cgilib-0.4, gd1.3 and libpng-1.0.9 linked into librrd.so. The library is much smaller compared to the 1.2.x version with separate dynamic linked libraries. This package contains command line tools used to manage RRDs. |
|
rrsync |
3.3.0-2 |
rrsync is a script which wraps around rsync to restrict its permission to a particular subdirectory via ~/.ssh/authorized_keys and/or to read-only or write-only mode |
|
rsnapshot |
1.4.5-1 |
rsnapshot is a filesystem snapshot utility for making backups of local and remote systems. Using rsync and hard links, it is possible to keep multiple, full backups instantly available. The disk space required is just a little more than the space of one full backup, plus incrementals. |
|
rsync |
3.3.0-2 |
rsync is a program that allows files to be copied to and from remote machines in much the same way as rcp. It has many more options than rcp, and uses the rsync remote-update protocol to greatly speed up file transfers when the destination file already exists. The rsync remote-update protocol allows rsync to transfer just the differences between two sets of files across the network link. |
|
rsyncd |
3.3.0-2 |
rsyncd is a configuration file and initscript to utilize rsync as a daemon. It uses the same binary as rsync. |
|
rtl-sdr |
2.0.1-1 |
rtl-sdr allows DVB-T dongles based on the Realtek RTL2832U to be used as an inexpensive SDR. This package contains the utilities and daemons. |
|
rtl_433 |
23.11-1 |
rtl_433 (despite the name) is a generic data receiver, mainly for the 433.92 MHz, 868 MHz (SRD), 315 MHz, 345 MHz, and 915 MHz ISM bands. To use it with OpenWrt you need a Realtek RTL2832 based DVB USB dongle (SoapySDR is not supported). |
|
rtl_433-ssl |
23.11-1 |
rtl_433 (despite the name) is a generic data receiver, mainly for the 433.92 MHz, 868 MHz (SRD), 315 MHz, 345 MHz, and 915 MHz ISM bands. To use it with OpenWrt you need a Realtek RTL2832 based DVB USB dongle (SoapySDR is not supported). This package includes OpenSSL support which allows you to send data to influxDB/MQTT using TLS. |
|
rtmpdump |
2.4-20210219-1 |
rtmpdump is a toolkit for RTMP streams. All forms of RTMP are supported. |
|
rtorrent |
0.9.8-2 |
rTorrent is a BitTorrent client for ncurses, using the libtorrent library. The client and library is written in C++ with emphasis on speed and efficiency, while delivering equivalent features to those found in GUI based clients in an ncurses client. This package is built without xmlrpc support |
|
rtorrent-easy-install |
0.2-7 |
This pakage helps to configure rtorrent with rutorrent web interface. Please note, we assuming no lighttpd installed\configured on your system before!. Just answer a few question to get torrent-client working. |
|
rtorrent-rpc |
0.9.8-2 |
rTorrent is a BitTorrent client for ncurses, using the libtorrent library. The client and library is written in C++ with emphasis on speed and efficiency, while delivering equivalent features to those found in GUI based clients in an ncurses client. This package is built with xmlrpc support |
|
rtpproxy |
2019.10.02~aa1f179e-4 |
RTP (Realtime Transport Protocol) proxy |
|
rtpproxy-mod-acct-csv |
2019.10.02~aa1f179e-4 |
RTPproxy CSV accounting module |
|
rtpproxy-mod-acct-rtcp-hep |
2019.10.02~aa1f179e-4 |
RTPproxy RTCP HEP accounting module |
|
rtpproxy-util-extractaudio |
2019.10.02~aa1f179e-4 |
RTPproxy extractaudio utility |
|
rtpproxy-util-makeann |
2019.10.02~aa1f179e-4 |
RTPproxy makeann utility |
|
ruby |
3.3.3-1 |
Ruby is the interpreted scripting language for quick and easy object-oriented programming. It has many features to process text files and to do system management tasks (as in perl). It is simple, straight-forward, and extensible. |
|
ruby-abbrev |
3.3.3-1 |
This package contains the ruby Calculates the set of unambiguous abbreviations for a given set of strings. Provides: - /opt/lib/ruby/3.3/abbrev.rb - /opt/lib/ruby/gems/3.3/gems/abbrev-*/ - /opt/lib/ruby/gems/3.3/specifications/default/abbrev-*.gemspec |
|
ruby-base64 |
3.3.3-1 |
This package contains the ruby Encode and decode base64. Provides: - /opt/lib/ruby/3.3/base64.rb - /opt/lib/ruby/gems/3.3/gems/base64-*/ - /opt/lib/ruby/gems/3.3/specifications/default/base64-*.gemspec |
|
ruby-benchmark |
3.3.3-1 |
This package contains the ruby Performance benchmarking library. Provides: - /opt/lib/ruby/3.3/benchmark.rb - /opt/lib/ruby/3.3/benchmark/ - /opt/lib/ruby/gems/3.3/gems/benchmark-*/ - /opt/lib/ruby/gems/3.3/specifications/default/benchmark-*.gemspec |
|
ruby-bigdecimal |
3.3.3-1 |
This package contains the ruby Arbitrary-precision decimal floating-point library. Provides: - /opt/lib/ruby/3.3/*/bigdecimal.so - /opt/lib/ruby/3.3/bigdecimal/ - /opt/lib/ruby/3.3/bigdecimal.rb - /opt/lib/ruby/gems/3.3/specifications/default/bigdecimal-*.gemspec |
|
ruby-bundler |
3.3.3-1 |
This package contains the ruby Manage dependencies. |
|
ruby-cgi |
3.3.3-1 |
This package contains the ruby CGI support toolkit. Provides: - /opt/lib/ruby/3.3/cgi.rb - /opt/lib/ruby/3.3/cgi/ - /opt/lib/ruby/gems/3.3/gems/cgi-*/ - /opt/lib/ruby/gems/3.3/specifications/default/cgi-*.gemspec - /opt/lib/ruby/3.3/*/cgi/escape.so |
|
ruby-continuation |
3.3.3-1 |
This package contains the ruby Similar to C setjmp/longjmp with extra states. Provides: - /opt/lib/ruby/3.3/*/continuation.so |
|
ruby-coverage |
3.3.3-1 |
This package contains the ruby Coverage measurement. Provides: - /opt/lib/ruby/3.3/coverage.rb - /opt/lib/ruby/3.3/*/coverage.so |
|
ruby-csv |
3.3.3-1 |
This package contains the ruby CSV Reading and Writing. Provides: - /opt/lib/ruby/3.3/csv.rb - /opt/lib/ruby/3.3/csv/ - /opt/lib/ruby/gems/3.3/specifications/default/csv-*.gemspec |
|
ruby-date |
3.3.3-1 |
This package contains the ruby Comparable module for handling dates. Provides: - /opt/lib/ruby/3.3/date.rb - /opt/lib/ruby/3.3/*/date_core.so - /opt/lib/ruby/gems/3.3/specifications/default/date-*.gemspec |
|
ruby-debug |
3.3.3-1 |
This package contains the ruby generic command line interface for ruby-debug. |
|
ruby-delegate |
3.3.3-1 |
This package contains the ruby lib to delegate method calls to an object. Provides: - /opt/lib/ruby/3.3/delegate.rb - /opt/lib/ruby/3.3/delegate/ - /opt/lib/ruby/gems/3.3/gems/delegate-*/ - /opt/lib/ruby/gems/3.3/specifications/default/delegate-*.gemspec |
|
ruby-dev |
3.3.3-1 |
Header files for compiling extension modules for the Ruby 3.3 |
|
ruby-did-you-mean |
3.3.3-1 |
This package contains the ruby did you mean? experience. Provides: - /opt/lib/ruby/3.3/did_you_mean.rb - /opt/lib/ruby/3.3/did_you_mean/ - /opt/lib/ruby/gems/3.3/gems/did_you_mean-*/ - /opt/lib/ruby/gems/3.3/specifications/default/did_you_mean-*.gemspec |
|
ruby-digest |
3.3.3-1 |
Provides digest* files. Can be configured to use OpenSSL or bundled hash functions. Provides: - /opt/lib/ruby/3.3/digest - /opt/lib/ruby/3.3/digest.rb - /opt/lib/ruby/3.3/*/digest.so - /opt/lib/ruby/3.3/*/digest/* - /opt/lib/ruby/gems/3.3/specifications/default/digest-*.gemspec |
|
ruby-drb |
3.3.3-1 |
This package contains the ruby distributed object system. Provides: - /opt/lib/ruby/3.3/drb.rb - /opt/lib/ruby/3.3/drb - /opt/lib/ruby/gems/3.3/specifications/default/drb-*.gemspec |
|
ruby-enc |
3.3.3-1 |
This package contains the ruby character re-coding library charset (small subset). Provides: - /opt/lib/ruby/3.3/*/enc/encdb.so - /opt/lib/ruby/3.3/*/enc/iso_8859_1.so - /opt/lib/ruby/3.3/*/enc/utf_*.so - /opt/lib/ruby/3.3/*/enc/euc_jp.so |
|
ruby-enc-extra |
3.3.3-1 |
This package contains the ruby character re-coding library charset (extra subset). Provides: - /opt/lib/ruby/3.3/*/enc Except: - /opt/lib/ruby/3.3/*/enc/encdb.so - /opt/lib/ruby/3.3/*/enc/iso_8859_1.so - /opt/lib/ruby/3.3/*/enc/utf_*.so - /opt/lib/ruby/3.3/*/enc/euc_jp.so |
|
ruby-english |
3.3.3-1 |
This package contains the ruby Reference some global vars as english variables. Provides: - /opt/lib/ruby/3.3/English.rb - /opt/lib/ruby/gems/3.3/specifications/default/english-*.gemspec |
|
ruby-erb |
3.3.3-1 |
This package contains the ruby (embedded interpreter). |
|
ruby-error_highlight |
3.3.3-1 |
This package contains the ruby Fine-grained error location in backtrace. Provides: - /opt/lib/ruby/3.3/error_highlight.rb - /opt/lib/ruby/3.3/error_highlight/* - /opt/lib/ruby/gems/3.3/specifications/default/error_highlight-*.gemspec |
|
ruby-etc |
3.3.3-1 |
This package contains the ruby Access info typically stored in /etc. Provides: - /opt/lib/ruby/3.3/*/etc.so - /opt/lib/ruby/gems/3.3/specifications/default/etc-*.gemspec |
|
ruby-expect |
3.3.3-1 |
This package contains the ruby Expect-like for IO. Provides: - /opt/lib/ruby/3.3/expect.rb |
|
ruby-fcntl |
3.3.3-1 |
This package contains the ruby Loads constants defined in the OS fcntl.h C header file. Provides: - /opt/lib/ruby/3.3/*/fcntl.so - /opt/lib/ruby/gems/3.3/specifications/default/fcntl-*.gemspec |
|
ruby-fiddle |
3.3.3-1 |
This package contains the ruby Libffi wrapper for Ruby. Provides: - /opt/lib/ruby/3.3/fiddle.rb - /opt/lib/ruby/3.3/fiddle/ - /opt/lib/ruby/3.3/*/fiddle.so - /opt/lib/ruby/gems/3.3/specifications/default/fiddle-*.gemspec |
|
ruby-fileutils |
3.3.3-1 |
This package contains the ruby File utility methods for copying moving removing etc. Provides: - /opt/lib/ruby/3.3/fileutils.rb - /opt/lib/ruby/gems/3.3/gems/fileutils-*/ - /opt/lib/ruby/gems/3.3/specifications/default/fileutils-*.gemspec |
|
ruby-find |
3.3.3-1 |
This package contains the ruby top-down traversal of a set of file paths. Provides: - /opt/lib/ruby/3.3/find.rb - /opt/lib/ruby/gems/3.3/specifications/default/find-*.gemspec |
|
ruby-forwardable |
3.3.3-1 |
This package contains the ruby delegation of methods to a object. Provides: - /opt/lib/ruby/3.3/forwardable.rb - /opt/lib/ruby/3.3/forwardable - /opt/lib/ruby/gems/3.3/specifications/default/forwardable-*.gemspec |
|
ruby-gems |
3.3.3-1 |
This package contains the ruby gems packet management. |
|
ruby-getoptlong |
3.3.3-1 |
This package contains the ruby implementation of getoptLong. Provides: - /opt/lib/ruby/3.3/getoptlong.rb - /opt/lib/ruby/3.3/getoptlong/ - /opt/lib/ruby/gems/3.3/gems/getoptlong-*/ - /opt/lib/ruby/gems/3.3/specifications/default/getoptlong-*.gemspec |
|
ruby-io-console |
3.3.3-1 |
This package contains the ruby Console interface. Provides: - /opt/lib/ruby/3.3/*/io/console.so - /opt/lib/ruby/3.3/io/console/ - /opt/lib/ruby/gems/3.3/specifications/default/io-console-*.gemspec |
|
ruby-io-nonblock |
3.3.3-1 |
This package contains the ruby Non-blocking mode with IO class. Provides: - /opt/lib/ruby/3.3/*/io/nonblock.so - /opt/lib/ruby/gems/3.3/specifications/default/io-nonblock-*.gemspec |
|
ruby-io-wait |
3.3.3-1 |
This package contains the ruby Waits until IO is readable or writable without blocking. Provides: - /opt/lib/ruby/3.3/*/io/wait.so - /opt/lib/ruby/gems/3.3/specifications/default/io-wait-*.gemspec |
|
ruby-ipaddr |
3.3.3-1 |
This package contains the ruby Set of methods to manipulate an IP address. Provides: - /opt/lib/ruby/3.3/ipaddr.rb - /opt/lib/ruby/gems/3.3/specifications/default/ipaddr-*.gemspec |
|
ruby-irb |
3.3.3-1 |
This package contains the ruby (interactive shell). |
|
ruby-json |
3.3.3-1 |
This package contains the ruby JSON Implementation for Ruby. Provides: - /opt/lib/ruby/3.3/json.rb - /opt/lib/ruby/3.3/json - /opt/lib/ruby/3.3/*/json - /opt/lib/ruby/gems/3.3/specifications/default/json-*.gemspec Except: - /opt/lib/ruby/3.3/psych - /opt/lib/ruby/3.3/psych.rb - /opt/lib/ruby/3.3/*/psych.so - /opt/lib/ruby/gems/3.3/specifications/default/psych-*.gemspec |
|
ruby-logger |
3.3.3-1 |
This package contains the ruby logger and syslog library. Provides: - /opt/lib/ruby/3.3/logger.rb - /opt/lib/ruby/3.3/logger/ - /opt/lib/ruby/gems/3.3/specifications/default/logger-*.gemspec |
|
ruby-matrix |
3.3.3-1 |
This package contains the ruby implementation of Matrix and Vector classes. Provides: - /opt/lib/ruby/gems/3.3/gems/matrix-* - /opt/lib/ruby/gems/3.3/specifications/matrix-*.gemspec Except: - /opt/lib/ruby/gems/3.3/gems/matrix-*/LICENSE.txt |
|
ruby-minitest |
3.3.3-1 |
This package contains the ruby Gem minitest. Provides: - /opt/lib/ruby/gems/3.3/specifications/minitest-*.gemspec - /opt/lib/ruby/gems/3.3/gems/minitest-* Except: - /opt/lib/ruby/gems/3.3/gems/minitest-*/test - /opt/lib/ruby/gems/3.3/gems/minitest-*/*.rdoc - /opt/lib/ruby/gems/3.3/gems/minitest-*/*.txt |
|
ruby-mkmf |
3.3.3-1 |
This package contains the ruby makefile library. Provides: - /opt/lib/ruby/3.3/mkmf.rb |
|
ruby-monitor |
3.3.3-1 |
This package contains the ruby Object or module methods are executed with mutual exclusion. Provides: - /opt/lib/ruby/3.3/monitor.rb - /opt/lib/ruby/3.3/*/monitor.so |
|
ruby-mutex_m |
3.3.3-1 |
This package contains the ruby extend objects to be handled like a Mutex. Provides: - /opt/lib/ruby/3.3/mutex_m.rb - /opt/lib/ruby/gems/3.3/specifications/default/mutex_m-*.gemspec |
|
ruby-net-ftp |
3.3.3-1 |
This package contains the ruby FTP lib. Provides: - /opt/lib/ruby/gems/3.3/gems/net-ftp-* - /opt/lib/ruby/gems/3.3/specifications/net-ftp-*.gemspec Except: - /opt/lib/ruby/gems/3.3/gems/net-ftp-*/LICENSE.txt - /opt/lib/ruby/gems/3.3/gems/net-ftp-*/README.md |
|
ruby-net-http |
3.3.3-1 |
This package contains the ruby HTTP lib. Provides: - /opt/lib/ruby/3.3/net/http.rb - /opt/lib/ruby/3.3/net/https.rb - /opt/lib/ruby/3.3/net/http/ - /opt/lib/ruby/gems/3.3/gems/net-http-*/ - /opt/lib/ruby/gems/3.3/specifications/default/net-http-*.gemspec |
|
ruby-net-imap |
3.3.3-1 |
This package contains the ruby IMAP lib. Provides: - /opt/lib/ruby/gems/3.3/gems/net-imap-* - /opt/lib/ruby/gems/3.3/specifications/net-imap-*.gemspec Except: - /opt/lib/ruby/gems/3.3/gems/net-imap-*/LICENSE.txt - /opt/lib/ruby/gems/3.3/gems/net-imap-*/README.md |
|
ruby-net-pop |
3.3.3-1 |
This package contains the ruby POP3 lib. Provides: - /opt/lib/ruby/gems/3.3/gems/net-pop-* - /opt/lib/ruby/gems/3.3/specifications/net-pop-*.gemspec Except: - /opt/lib/ruby/gems/3.3/gems/net-pop-*/LICENSE.txt - /opt/lib/ruby/gems/3.3/gems/net-pop-*/README.md |
|
ruby-net-protocol |
3.3.3-1 |
This package contains the ruby Abstract for net-* clients. Provides: - /opt/lib/ruby/3.3/net/protocol.rb - /opt/lib/ruby/gems/3.3/specifications/default/net-protocol-*.gemspec |
|
ruby-net-smtp |
3.3.3-1 |
This package contains the ruby SMTP lib. Provides: - /opt/lib/ruby/gems/3.3/gems/net-smtp-* - /opt/lib/ruby/gems/3.3/specifications/net-smtp-*.gemspec Except: - /opt/lib/ruby/gems/3.3/gems/net-smtp-*/LICENSE.txt - /opt/lib/ruby/gems/3.3/gems/net-smtp-*/README.md - /opt/lib/ruby/gems/3.3/gems/net-smtp-*/NEWS.md |
|
ruby-nkf |
3.3.3-1 |
This package contains the ruby Network Kanji Filter. Provides: - /opt/lib/ruby/3.3/kconv.rb - /opt/lib/ruby/3.3/*/nkf.so - /opt/lib/ruby/gems/3.3/specifications/default/nkf-*.gemspec |
|
ruby-objspace |
3.3.3-1 |
This package contains the ruby Routines to interact with the garbage collection facility. Provides: - /opt/lib/ruby/3.3/objspace.rb - /opt/lib/ruby/3.3/objspace/* - /opt/lib/ruby/3.3/*/objspace.so |
|
ruby-observer |
3.3.3-1 |
This package contains the ruby Observer design pattern. Provides: - /opt/lib/ruby/3.3/observer.rb - /opt/lib/ruby/3.3/observer/ - /opt/lib/ruby/gems/3.3/gems/observer-*/ - /opt/lib/ruby/gems/3.3/specifications/default/observer-*.gemspec |
|
ruby-open-uri |
3.3.3-1 |
This package contains the ruby Wrapper for Net::HTTP Net::HTTPS and Net::. Provides: - /opt/lib/ruby/3.3/open-uri.rb - /opt/lib/ruby/gems/3.3/specifications/default/open-uri-*.gemspec |
|
ruby-open3 |
3.3.3-1 |
This package contains the ruby popen with stderr. Provides: - /opt/lib/ruby/3.3/open3.rb - /opt/lib/ruby/3.3/open3/ - /opt/lib/ruby/gems/3.3/gems/open3-*/ - /opt/lib/ruby/gems/3.3/specifications/default/open3-*.gemspec |
|
ruby-openssl |
3.3.3-1 |
This package contains the ruby SSL TLS and general purpose cryptography. Provides: - /opt/lib/ruby/3.3/openssl - /opt/lib/ruby/3.3/openssl.rb - /opt/lib/ruby/3.3/*/openssl.so - /opt/lib/ruby/gems/3.3/specifications/default/openssl-*.gemspec |
|
ruby-optparse |
3.3.3-1 |
This package contains the ruby command-line option analysis. Provides: - /opt/lib/ruby/3.3/optparse.rb - /opt/lib/ruby/3.3/optionparser.rb - /opt/lib/ruby/3.3/optparse - /opt/lib/ruby/gems/3.3/specifications/default/optparse-*.gemspec |
|
ruby-ostruct |
3.3.3-1 |
This package contains the ruby build custom data structures. Provides: - /opt/lib/ruby/3.3/ostruct.rb - /opt/lib/ruby/3.3/ostruct/ - /opt/lib/ruby/gems/3.3/specifications/default/ostruct-*.gemspec |
|
ruby-pathname |
3.3.3-1 |
This package contains the ruby Pathname lib. Provides: - /opt/lib/ruby/3.3/pathname.rb - /opt/lib/ruby/3.3/*/pathname.so - /opt/lib/ruby/gems/3.3/specifications/default/pathname-*.gemspec |
|
ruby-powerassert |
3.3.3-1 |
This package contains the ruby Gem power_assert. Provides: - /opt/lib/ruby/gems/3.3/specifications/power_assert-*.gemspec - /opt/lib/ruby/gems/3.3/gems/power_assert-* Except: - /opt/lib/ruby/gems/3.3/gems/power_assert-*/*.rdoc - /opt/lib/ruby/gems/3.3/gems/power_assert-*/.travis.yml - /opt/lib/ruby/gems/3.3/gems/power_assert-*/README.md |
|
ruby-pp |
3.3.3-1 |
This package contains the ruby Pretty print objects. Provides: - /opt/lib/ruby/3.3/pp.rb - /opt/lib/ruby/gems/3.3/specifications/default/pp-*.gemspec |
|
ruby-prettyprint |
3.3.3-1 |
This package contains the ruby PrettyPrint library. Provides: - /opt/lib/ruby/3.3/prettyprint.rb - /opt/lib/ruby/gems/3.3/specifications/default/prettyprint-*.gemspec |
|
ruby-prime |
3.3.3-1 |
This package contains the ruby Prime numbers and factorization library. Provides: - /opt/lib/ruby/gems/3.3/gems/prime-* - /opt/lib/ruby/gems/3.3/specifications/prime-*.gemspec Except: - /opt/lib/ruby/gems/3.3/gems/prime-*/LICENSE.txt - /opt/lib/ruby/gems/3.3/gems/prime-*/README.md |
|
ruby-prism |
3.3.3-1 |
This package contains the ruby parser for the Ruby programming language. Provides: - /opt/lib/ruby/3.3/prism.rb - /opt/lib/ruby/3.3/prism/* - /opt/lib/ruby/gems/3.3/specifications/default/prism-*.gemspec |
|
ruby-pstore |
3.3.3-1 |
This package contains the ruby file based persistence. Provides: - /opt/lib/ruby/3.3/pstore.rb - /opt/lib/ruby/3.3/pstore/ - /opt/lib/ruby/gems/3.3/gems/pstore-*/ - /opt/lib/ruby/gems/3.3/specifications/default/pstore-*.gemspec |
|
ruby-psych |
3.3.3-1 |
This package contains the ruby YAML parser and emitter. Provides: - /opt/lib/ruby/3.3/psych - /opt/lib/ruby/3.3/psych.rb - /opt/lib/ruby/3.3/*/psych.so - /opt/lib/ruby/gems/3.3/specifications/default/psych-*.gemspec |
|
ruby-pty |
3.3.3-1 |
This package contains the ruby Creates and manages pseudo terminals. Provides: - /opt/lib/ruby/3.3/*/pty.so |
|
ruby-racc |
3.3.3-1 |
This package contains the ruby LALR parser generator. |
|
ruby-rake |
3.3.3-1 |
This package contains the ruby Rake (make replacement). |
|
ruby-random_formatter |
3.3.3-1 |
This package contains the ruby Formats generated random numbers in many manners. Provides: - /opt/lib/ruby/3.3/random/formatter.rb |
|
ruby-rbconfig |
3.3.3-1 |
This package contains the ruby RbConfig. Provides: - /opt/lib/ruby/3.3/*/rbconfig.rb - /opt/lib/ruby/3.3/*/rbconfig/*.so |
|
ruby-rbs |
3.3.3-1 |
This package contains the ruby RBS provides syntax and semantics definition for the Ruby Signature language. |
|
ruby-rdoc |
3.3.3-1 |
This package contains the ruby RDoc produces HTML and command-line documentation for Ruby projects. |
|
ruby-readline |
3.3.3-1 |
This package contains the ruby loads readline-ext(native) or reline(ruby). Provides: - /opt/lib/ruby/3.3/readline.rb - /opt/lib/ruby/gems/3.3/gems/readline-0* - /opt/lib/ruby/gems/3.3/specifications/default/readline-0*.gemspec |
|
ruby-reline |
3.3.3-1 |
This package contains the ruby alternative to readline-ext in pure ruby. Provides: - /opt/lib/ruby/3.3/reline.rb - /opt/lib/ruby/3.3/reline - /opt/lib/ruby/gems/3.3/gems/reline-* - /opt/lib/ruby/gems/3.3/specifications/default/reline-*.gemspec |
|
ruby-resolv |
3.3.3-1 |
This package contains the ruby DNS resolver library. Provides: - /opt/lib/ruby/3.3/resolv.rb - /opt/lib/ruby/gems/3.3/specifications/default/resolv-*.gemspec Except: - /opt/lib/ruby/gems/3.3/specifications/default/resolv-replace*.gemspec |
|
ruby-resolv-replace |
3.3.3-1 |
This package contains the ruby Replace Socket DNS with Resolv. Provides: - /opt/lib/ruby/3.3/resolv-replace.rb - /opt/lib/ruby/gems/3.3/specifications/default/resolv-replace*.gemspec |
|
ruby-rexml |
3.3.3-1 |
This package contains the ruby XML toolkit. Provides: - /opt/lib/ruby/3.3/rexml - /opt/lib/ruby/gems/3.3/gems/rexml-* - /opt/lib/ruby/gems/3.3/specifications/rexml-*.gemspec Except: - /opt/lib/ruby/gems/3.3/gems/rexml-*/doc - /opt/lib/ruby/gems/3.3/gems/rexml-*/test - /opt/lib/ruby/gems/3.3/gems/rexml-*/sample - /opt/lib/ruby/gems/3.3/gems/rexml-*/*.md - /opt/lib/ruby/gems/3.3/gems/rexml-*/.travis.yml - /opt/lib/ruby/gems/3.3/gems/rexml-*/LICENSE.txt |
|
ruby-rinda |
3.3.3-1 |
This package contains the ruby Linda paradigm implementation. Provides: - /opt/lib/ruby/3.3/rinda - /opt/lib/ruby/gems/3.3/specifications/default/rinda-*.gemspec |
|
ruby-ripper |
3.3.3-1 |
This package contains the ruby script parser. Provides: - /opt/lib/ruby/3.3/ripper.rb - /opt/lib/ruby/3.3/ripper - /opt/lib/ruby/3.3/*/ripper.so |
|
ruby-rjit |
3.3.3-1 |
This package contains the ruby jit written in pure Ruby. Provides: - /opt/lib/ruby/3.3/ruby_vm/rjit/ |
|
ruby-rss |
3.3.3-1 |
This package contains the ruby RSS toolkit. Provides: - /opt/lib/ruby/3.3/rss - /opt/lib/ruby/3.3/rss.rb - /opt/lib/ruby/gems/3.3/gems/rss-* - /opt/lib/ruby/gems/3.3/specifications/rss-*.gemspec Except: - /opt/lib/ruby/gems/3.3/gems/rss-*/doc - /opt/lib/ruby/gems/3.3/gems/rss-*/test - /opt/lib/ruby/gems/3.3/gems/rss-*/sample - /opt/lib/ruby/gems/3.3/gems/rss-*/*.md - /opt/lib/ruby/gems/3.3/gems/rss-*/*.txt |
|
ruby-ruby2_keywords |
3.3.3-1 |
This package contains the ruby Placeholder to satisfy dependencies on ruby2_keywords. Provides: - /opt/lib/ruby/gems/3.3/gems/ruby2_keywords-*/ - /opt/lib/ruby/gems/3.3/specifications/default/ruby2_keywords-*.gemspec |
|
ruby-securerandom |
3.3.3-1 |
This package contains the ruby Secure random number generators. Provides: - /opt/lib/ruby/3.3/securerandom.rb - /opt/lib/ruby/gems/3.3/specifications/default/securerandom-*.gemspec |
|
ruby-set |
3.3.3-1 |
This package contains the ruby Set collection. Provides: - /opt/lib/ruby/3.3/set.rb - /opt/lib/ruby/3.3/set/*.rb - /opt/lib/ruby/gems/3.3/specifications/default/set-*.gemspec |
|
ruby-shellwords |
3.3.3-1 |
This package contains the ruby Manipulate strings as Bourne Shell. Provides: - /opt/lib/ruby/3.3/shellwords.rb - /opt/lib/ruby/gems/3.3/specifications/default/shellwords-*.gemspec |
|
ruby-singleton |
3.3.3-1 |
This package contains the ruby Singleton pattern. Provides: - /opt/lib/ruby/3.3/singleton.rb - /opt/lib/ruby/3.3/singleton/ - /opt/lib/ruby/gems/3.3/gems/singleton-* - /opt/lib/ruby/gems/3.3/specifications/default/singleton-*.gemspec |
|
ruby-socket |
3.3.3-1 |
This package contains the ruby socket support. Provides: - /opt/lib/ruby/3.3/socket.rb - /opt/lib/ruby/3.3/*/socket.so |
|
ruby-stdlib |
3.3.3-1 |
This metapackage currently install all ruby-* packages, providing a complete Ruby Standard Library. |
|
ruby-stringio |
3.3.3-1 |
This package contains the ruby Pseudo `IO` class from/to `String`. Provides: - /opt/lib/ruby/3.3/*/stringio.so - /opt/lib/ruby/gems/3.3/specifications/default/stringio-*.gemspec |
|
ruby-strscan |
3.3.3-1 |
This package contains the ruby Lexical scanning operations on a String. Provides: - /opt/lib/ruby/3.3/*/strscan.so - /opt/lib/ruby/gems/3.3/specifications/default/strscan-*.gemspec |
|
ruby-syntax_suggest |
3.3.3-1 |
This package contains the ruby Find missing end syntax errors. |
|
ruby-syslog |
3.3.3-1 |
This package contains the ruby Syslog Lib. Provides: - /opt/lib/ruby/3.3/*/syslog.so - /opt/lib/ruby/3.3/syslog/logger.rb - /opt/lib/ruby/gems/3.3/specifications/default/syslog-*.gemspec |
|
ruby-tempfile |
3.3.3-1 |
This package contains the ruby Manages temporary files. Provides: - /opt/lib/ruby/3.3/tempfile.rb - /opt/lib/ruby/gems/3.3/specifications/default/tempfile-*.gemspec |
|
ruby-testunit |
3.3.3-1 |
This package contains the ruby Gem test-unit. Provides: - /opt/lib/ruby/gems/3.3/specifications/test-unit-*.gemspec - /opt/lib/ruby/gems/3.3/gems/test-unit-* Except: - /opt/lib/ruby/gems/3.3/gems/test-unit-*/doc - /opt/lib/ruby/gems/3.3/gems/test-unit-*/test - /opt/lib/ruby/gems/3.3/gems/test-unit-*/sample - /opt/lib/ruby/gems/3.3/gems/test-unit-*/*.md |
|
ruby-time |
3.3.3-1 |
This package contains the ruby Extends Time with additional methods for parsing and converting Times. Provides: - /opt/lib/ruby/3.3/time.rb - /opt/lib/ruby/gems/3.3/specifications/default/time-*.gemspec |
|
ruby-timeout |
3.3.3-1 |
This package contains the ruby Auto-terminate potentially long-running operations. Provides: - /opt/lib/ruby/3.3/timeout.rb - /opt/lib/ruby/3.3/timeout/ - /opt/lib/ruby/gems/3.3/gems/timeout-* - /opt/lib/ruby/gems/3.3/specifications/default/timeout-*.gemspec |
|
ruby-tmpdir |
3.3.3-1 |
This package contains the ruby Get temp dir path. Provides: - /opt/lib/ruby/3.3/tmpdir.rb - /opt/lib/ruby/gems/3.3/specifications/default/tmpdir-*.gemspec |
|
ruby-tsort |
3.3.3-1 |
This package contains the ruby Topological sorting using Tarjan s algorithm. Provides: - /opt/lib/ruby/3.3/tsort.rb - /opt/lib/ruby/gems/3.3/specifications/default/tsort-*.gemspec |
|
ruby-typeprof |
3.3.3-1 |
This package contains the ruby A type analysis tool for Ruby code based on abstract interpretation. |
|
ruby-un |
3.3.3-1 |
This package contains the ruby Utilities to replace common UNIX commands in Makefiles. Provides: - /opt/lib/ruby/3.3/un.rb - /opt/lib/ruby/gems/3.3/specifications/default/un-*.gemspec |
|
ruby-unicodenormalize |
3.3.3-1 |
This package contains the ruby String additions for Unicode normalization. Provides: - /opt/lib/ruby/3.3/unicode_normalize |
|
ruby-uri |
3.3.3-1 |
This package contains the ruby library to handle URI. Provides: - /opt/lib/ruby/3.3/uri.rb - /opt/lib/ruby/3.3/uri - /opt/lib/ruby/gems/3.3/gems/uri-*/ - /opt/lib/ruby/gems/3.3/specifications/default/uri-*.gemspec |
|
ruby-weakref |
3.3.3-1 |
This package contains the ruby Weak reference to be garbage collected. Provides: - /opt/lib/ruby/3.3/weakref.rb - /opt/lib/ruby/gems/3.3/specifications/default/weakref-*.gemspec |
|
ruby-yaml |
3.3.3-1 |
This package contains the ruby YAML toolkit. Provides: - /opt/lib/ruby/3.3/yaml - /opt/lib/ruby/3.3/yaml.rb - /opt/lib/ruby/gems/3.3/gems/yaml-*/ - /opt/lib/ruby/gems/3.3/specifications/default/yaml-*.gemspec |
|
ruby-zlib |
3.3.3-1 |
This package contains the ruby compression/decompression library interface. Provides: - /opt/lib/ruby/3.3/*/zlib.so - /opt/lib/ruby/gems/3.3/specifications/default/zlib-*.gemspec |
|
rustc |
1.79.0-1 |
The Rust Programming Language. |
|
rustdesk-server |
1.1.11-1-1 |
RustDesk Server Program. |
|
rutorrent |
4.3.5-1 |
ruTorrent is a front-end for the popular Bittorrent client rTorrent. |
|
rutorrent-plugin-_cloudflare |
4.3.5-1 |
This is a _cloudflare Rutorrent plugin. |
|
rutorrent-plugin-_getdir |
4.3.5-1 |
This is a _getdir Rutorrent plugin. |
|
rutorrent-plugin-_noty |
4.3.5-1 |
This is a _noty Rutorrent plugin. |
|
rutorrent-plugin-_noty2 |
4.3.5-1 |
This is a _noty2 Rutorrent plugin. |
|
rutorrent-plugin-_task |
4.3.5-1 |
This is a _task Rutorrent plugin. |
|
rutorrent-plugin-autotools |
4.3.5-1 |
This is a autotools Rutorrent plugin. |
|
rutorrent-plugin-bulk_magnet |
4.3.5-1 |
This is a bulk_magnet Rutorrent plugin. |
|
rutorrent-plugin-check_port |
4.3.5-1 |
This is a check_port Rutorrent plugin. |
|
rutorrent-plugin-chunks |
4.3.5-1 |
This is a chunks Rutorrent plugin. |
|
rutorrent-plugin-cookies |
4.3.5-1 |
This is a cookies Rutorrent plugin. |
|
rutorrent-plugin-cpuload |
4.3.5-1 |
This is a cpuload Rutorrent plugin. |
|
rutorrent-plugin-create |
4.3.5-1 |
This is a create Rutorrent plugin. |
|
rutorrent-plugin-data |
4.3.5-1 |
This is a data Rutorrent plugin. |
|
rutorrent-plugin-datadir |
4.3.5-1 |
This is a datadir Rutorrent plugin. |
|
rutorrent-plugin-diskspace |
4.3.5-1 |
This is a diskspace Rutorrent plugin. |
|
rutorrent-plugin-edit |
4.3.5-1 |
This is a edit Rutorrent plugin. |
|
rutorrent-plugin-erasedata |
4.3.5-1 |
This is a erasedata Rutorrent plugin. |
|
rutorrent-plugin-extratio |
4.3.5-1 |
This is a extratio Rutorrent plugin. |
|
rutorrent-plugin-extsearch |
4.3.5-1 |
This is a extsearch Rutorrent plugin. |
|
rutorrent-plugin-feeds |
4.3.5-1 |
This is a feeds Rutorrent plugin. |
|
rutorrent-plugin-filedrop |
4.3.5-1 |
This is a filedrop Rutorrent plugin. |
|
rutorrent-plugin-geoip |
4.3.5-1 |
This is a geoip Rutorrent plugin. |
|
rutorrent-plugin-history |
4.3.5-1 |
This is a history Rutorrent plugin. |
|
rutorrent-plugin-httprpc |
4.3.5-1 |
This is a httprpc Rutorrent plugin. |
|
rutorrent-plugin-ipad |
4.3.5-1 |
This is a ipad Rutorrent plugin. |
|
rutorrent-plugin-loginmgr |
4.3.5-1 |
This is a loginmgr Rutorrent plugin. |
|
rutorrent-plugin-lookat |
4.3.5-1 |
This is a lookat Rutorrent plugin. |
|
rutorrent-plugin-mediainfo |
4.3.5-1 |
This is a mediainfo Rutorrent plugin. |
|
rutorrent-plugin-ratio |
4.3.5-1 |
This is a ratio Rutorrent plugin. |
|
rutorrent-plugin-retrackers |
4.3.5-1 |
This is a retrackers Rutorrent plugin. |
|
rutorrent-plugin-rss |
4.3.5-1 |
This is a rss Rutorrent plugin. |
|
rutorrent-plugin-rssurlrewrite |
4.3.5-1 |
This is a rssurlrewrite Rutorrent plugin. |
|
rutorrent-plugin-rutracker_check |
4.3.5-1 |
This is a rutracker_check Rutorrent plugin. |
|
rutorrent-plugin-scheduler |
4.3.5-1 |
This is a scheduler Rutorrent plugin. |
|
rutorrent-plugin-screenshots |
4.3.5-1 |
This is a screenshots Rutorrent plugin. |
|
rutorrent-plugin-seedingtime |
4.3.5-1 |
This is a seedingtime Rutorrent plugin. |
|
rutorrent-plugin-show_peers_like_wtorrent |
4.3.5-1 |
This is a show_peers_like_wtorrent Rutorrent plugin. |
|
rutorrent-plugin-source |
4.3.5-1 |
This is a source Rutorrent plugin. |
|
rutorrent-plugin-spectrogram |
4.3.5-1 |
This is a spectrogram Rutorrent plugin. |
|
rutorrent-plugin-theme |
4.3.5-1 |
This is a theme Rutorrent plugin. |
|
rutorrent-plugin-throttle |
4.3.5-1 |
This is a throttle Rutorrent plugin. |
|
rutorrent-plugin-tracklabels |
4.3.5-1 |
This is a tracklabels Rutorrent plugin. |
|
rutorrent-plugin-trafic |
4.3.5-1 |
This is a trafic Rutorrent plugin. |
|
rutorrent-plugin-unpack |
4.3.5-1 |
This is a unpack Rutorrent plugin. |
|
rutorrent-plugin-uploadeta |
4.3.5-1 |
This is a uploadeta Rutorrent plugin. |
|
rutorrent-plugin-xmpp |
4.3.5-1 |
This is a xmpp Rutorrent plugin. |
|
s3fs-fuse |
1.94-1 |
FUSE-based file system backed by Amazon S3. |
|
samba4-admin |
4.18.8-2 |
installs: net smbcontrol profiles rpcclient dbwrap_tool eventlogadm ldbadd ldbdel ldbedit ldbmodify ldbrename ldbsearch tdbbackup tdbdump tdbrestore tdbtool Administration tools collection |
|
samba4-client |
4.18.8-2 |
installs: cifsdd smbclient smbget The smbclient program implements a simple ftp-like client for accessing SMB shares |
|
samba4-libs |
4.18.8-2 |
Samba 4.18.8 libs |
|
samba4-server |
4.18.8-2 |
installs: smbd (nmbd) smbpasswd pdbedit testparm (nmblookup) (smbcacls sharesec) (samba samba-tool ntlm_auth samba-gpupdate samba_dnsupdate samba_kcc samba_spnupdate samba_upgradedns samba_downgrade_db) This provides the basic fileserver service and is the minimum needed to serve file shares. HINT: https://fitzcarraldoblog.wordpress.com/2016/10/17/a-correct-method-of-configuring-samba-for-browsing-smb-shares-in-a-home-network/ |
|
samba4-utils |
4.18.8-2 |
installs: smbstatus smbtree mvxattr smbtar (smbcquotas) Utilities collection |
|
sane-backends |
1.3.1-1 |
SANE (Scanner Access Now Easy) is a universal scanner interface. This package contains the SANE daemon. |
|
sane-frontends |
1.3.1-1 |
SANE (Scanner Access Now Easy) is a universal scanner interface. This package contains the SANE frontends. |
|
sane-libs |
1.3.1-1 |
SANE (Scanner Access Now Easy) is a universal scanner interface. This package contains the SANE shared libraries. |
|
sbc |
2.0-1 |
Low Complexity Subband Coding for bluetooth audio profiles encoding and decoding. Needed for A2DP support. |
|
scan-s2 |
1.0-6 |
The scan-s2 utilty can be used to scan channels on currently locked (by szap-s2 utility) channel or by specifying frequencies list that will be scanned one after another. |
|
scream-receiver |
4.0-1 |
scream is a Scream audio receiver using Pulseaudio, ALSA or stdout as audio output. |
|
screen |
4.9.1-2 |
Screen is a full-screen window manager that multiplexes a physical terminal between several processes, typically interactive shells. |
|
script-utils |
2.40.1-1 |
contains: script, scriptreplay |
|
sd-idle |
2.6-1 |
sd-idle-2.6 is a disk idle spindown program for router firmware based on linux 2.6. |
|
sdparm |
1.11-1 |
The sdparm utility outputs and in some cases modifies SCSI device parameters. |
|
sed |
4.9-1 |
sed (stream editor) is a non-interactive command-line text editor. sed is commonly used to filter text, i.e., it takes text input, performs some operation (or set of operations) on it, and outputs the modified text. sed is typically used for extracting part of a file using pattern matching or substituting multiple occurrences of a string within a file. |
|
ser2net |
4.6.2-1 |
This project provides a proxy that allows telnet/tcp connections to be made to serial ports on a machine. |
|
serdisplib |
2.02-2 |
serdisplib started as a library to drive serial displays with built-in controllers. It can optionally dynamically link with libusb-compat, libgd and libpthread, some features require having those packages installed as well. |
|
setserial |
2.17-4 |
Setserial is a program which allows you to look at and change various attributes of a serial device, including its port, its IRQ, and other serial port options. |
|
setterm |
2.40.1-1 |
setterm writes to standard output a character string that will invoke the specified terminal capabilities |
|
sexpect |
2.3.11-3 |
Sexpect is another implementation of Expect which is specifically designed for shells. It's lightweight and has no dependency on other packages. |
|
sfdisk |
2.40.1-1 |
list the size of a partition, list the partitions on a device, check the partitions on a device and repartition a device |
|
sg3_utils |
1.44-2 |
This package contains utilities that send SCSI commands to devices. As well as devices on transports traditionally associated with SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI Parallel Interface(SPI)) many other devices use SCSI command sets. ATAPI cd/dvd drives and SATA disks that connect via a translation layer or a bridge device are examples of devices that use SCSI command sets. |
|
sgdisk |
1.0.10-1 |
sgdisk is GPT-aware disk partitioning tool for scripting use. |
|
shadow |
4.8.1-3b |
Full versions of standard shadow utilities. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient and much smaller. |
|
shadow-chage |
4.8.1-3b |
Full version of standard chage utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-chfn |
4.8.1-3b |
Full version of standard chfn utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-chgpasswd |
4.8.1-3b |
Full version of standard chgpasswd utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-chpasswd |
4.8.1-3b |
Full version of standard chpasswd utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-chsh |
4.8.1-3b |
Full version of standard chsh utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-common |
4.8.1-3b |
Shared definitions for the PLD Linux shadow utilities |
|
shadow-expiry |
4.8.1-3b |
Full version of standard expiry utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-faillog |
4.8.1-3b |
Full version of standard faillog utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-gpasswd |
4.8.1-3b |
Full version of standard gpasswd utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-groupadd |
4.8.1-3b |
Full version of standard groupadd utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-groupdel |
4.8.1-3b |
Full version of standard groupdel utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-groupmems |
4.8.1-3b |
Full version of standard groupmems utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-groupmod |
4.8.1-3b |
Full version of standard groupmod utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-groups |
4.8.1-3b |
Full version of standard groups utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-grpck |
4.8.1-3b |
Full version of standard grpck utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-grpconv |
4.8.1-3b |
Full version of standard grpconv utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-grpunconv |
4.8.1-3b |
Full version of standard grpunconv utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-lastlog |
4.8.1-3b |
Full version of standard lastlog utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-login |
4.8.1-3b |
Full version of standard login utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-logoutd |
4.8.1-3b |
Full version of standard logoutd utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-newgidmap |
4.8.1-3b |
Full version of standard newgidmap utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-newgrp |
4.8.1-3b |
Full version of standard newgrp utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-newuidmap |
4.8.1-3b |
Full version of standard newuidmap utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-newusers |
4.8.1-3b |
Full version of standard newusers utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-nologin |
4.8.1-3b |
Full version of standard nologin utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-passwd |
4.8.1-3b |
Full version of standard passwd utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-pwck |
4.8.1-3b |
Full version of standard pwck utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-pwconv |
4.8.1-3b |
Full version of standard pwconv utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-pwunconv |
4.8.1-3b |
Full version of standard pwunconv utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-su |
4.8.1-3b |
Full version of standard su utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-useradd |
4.8.1-3b |
Full version of standard useradd utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-userdel |
4.8.1-3b |
Full version of standard userdel utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-usermod |
4.8.1-3b |
Full version of standard usermod utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadow-utils |
4.8.1-3b |
Full versions of standard shadow utilities. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient and much smaller. |
|
shadow-vipw |
4.8.1-3b |
Full version of standard vipw utility. Normally, you would not use this package, since the functionality in BusyBox is more than sufficient. |
|
shadowsocks-libev-config |
3.3.5-11 |
shadowsocks-libev config scripts |
|
shadowsocks-libev-ss-local |
3.3.5-11 |
shadowsocks-libev ss-local |
|
shadowsocks-libev-ss-redir |
3.3.5-11 |
shadowsocks-libev ss-redir |
|
shadowsocks-libev-ss-server |
3.3.5-11 |
shadowsocks-libev ss-server |
|
shadowsocks-libev-ss-tunnel |
3.3.5-11 |
shadowsocks-libev ss-tunnel |
|
shairport-sync-mini |
4.3.2-6 |
Shairport Sync plays audio from iTunes and AirPlay sources, including iOS devices, Quicktime Player and third party sources such as forkedDaapd. Audio played by a Shairport Sync-powered device stays synchronised with the source and hence with similar devices playing the same source. Shairport Sync does not support AirPlay video or photo streaming. Ensure Kernel Modules > Sound Support > kmod-sound-core is selected. Also select kmod-usb-audio if you want to use USB-connected sound cards. Minimal version uses mbed TLS and does not include libsoxr and avahi support. |
|
shairport-sync-openssl |
4.3.2-6 |
Shairport Sync plays audio from iTunes and AirPlay sources, including iOS devices, Quicktime Player and third party sources such as forkedDaapd. Audio played by a Shairport Sync-powered device stays synchronised with the source and hence with similar devices playing the same source. Shairport Sync does not support AirPlay video or photo streaming. Ensure Kernel Modules > Sound Support > kmod-sound-core is selected. Also select kmod-usb-audio if you want to use USB-connected sound cards. |
|
shake |
1.0-20170702-1 |
Shake is a defragmenter that runs in userspace. |
|
shc |
4.0.3-1 |
Shc takes a script, which is specified on the command line and produces C source code. The generated source code is then compiled and linked to produce a stripped binary executable. |
|
shell2http |
2024-03-23-1 |
Executing shell commands via simple http server (written in Go language). Settings through 2 command line arguments, path and shell command. By default bind to :8080. |
|
shellinabox |
2.20-2 |
Web based AJAX terminal emulator. |
|
shine |
3.1.1-1 |
savonet/shine is a blazing fast mp3 encoding library implemented in fixed-point arithmetic. The library can thus be used to perform super fast mp3 encoding on architectures without a FPU, such as armel, etc.. It is also, however, also super fast on architectures with a FPU! |
|
shntool |
3.0.10-3 |
shntool has native support for .wav files. If you want it to work with other lossless audio formats, you must have the appropriate helper program installed. |
|
simple-mtpfs |
0.4.0-1 |
SIMPLE-MTPFS (Simple Media Transfer Protocol FileSystem) is a file system capable of operating on files on MTP devices attached via USB to local machine. The practical effect of this is that the end user can seamlessly interact with MTP device files. |
|
simple-obfs |
0.0.5-1 |
Simple-obfs is a simple obfusacting tool, designed as plugin server of shadowsocks. |
|
simple-obfs-server |
0.0.5-1 |
Simple-obfs is a simple obfusacting tool, designed as plugin server of shadowsocks. |
|
sing-box-go |
1.9.3-1 |
Sing-box is a fast, customizable and univsersal proxy platform that can be used to create network proxy servers, clients and transparent proxies. |
|
sipgrep |
2.2.0-1 |
Powerful pcap-aware command line tool to sniff, capture, display and troubleshoot SIP signaling over IP networks, allowing the user to specify extended regular expressions matching against SIP headers. |
|
siproxd |
2022.02.18~4750bea4-2 |
Siproxd is a proxy/masquerading daemon for the SIP protocol. Refer to https://openwrt.org/docs/guide-user/services/voip/siproxd for configuration details and examples. |
|
siproxd-mod-blacklist |
2022.02.18~4750bea4-2 |
siproxd blacklist plugin |
|
siproxd-mod-codecfilter |
2022.02.18~4750bea4-2 |
siproxd codecfilter plugin |
|
siproxd-mod-defaulttarget |
2022.02.18~4750bea4-2 |
siproxd defaulttarget plugin |
|
siproxd-mod-demo |
2022.02.18~4750bea4-2 |
siproxd demo plugin |
|
siproxd-mod-fix-DTAG |
2022.02.18~4750bea4-2 |
siproxd fix_DTAG plugin |
|
siproxd-mod-fix-bogus-via |
2022.02.18~4750bea4-2 |
siproxd fix_bogus_via plugin |
|
siproxd-mod-fix-fbox-anoncall |
2022.02.18~4750bea4-2 |
siproxd fix_fbox_anoncall plugin |
|
siproxd-mod-logcall |
2022.02.18~4750bea4-2 |
siproxd logcall plugin |
|
siproxd-mod-prefix |
2022.02.18~4750bea4-2 |
siproxd prefix plugin |
|
siproxd-mod-regex |
2022.02.18~4750bea4-2 |
siproxd regex plugin |
|
siproxd-mod-shortdial |
2022.02.18~4750bea4-2 |
siproxd shortdial plugin |
|
siproxd-mod-siptrunk |
2022.02.18~4750bea4-2 |
siproxd siptrunk plugin |
|
siproxd-mod-stats |
2022.02.18~4750bea4-2 |
siproxd stats plugin |
|
siproxd-mod-stripheader |
2022.02.18~4750bea4-2 |
siproxd stripheader plugin |
|
siproxd-mod-stun |
2022.02.18~4750bea4-2 |
siproxd stun plugin |
|
sispmctl |
4.8-1 |
The sispmctl tool can control Gembird SIS-PM Silver Shield programmable power outlet strips (also known under the name Revolt Intelli-Plug) from the command line. . It can be used to switch on or off any of the programmable power sockets of the SIS-PM via USB. It can also show the current status of each power socket, and it can handle multiple SIS-PM devices, too. |
|
sitecopy |
0.16.6-3 |
Sitecopy is for easily maintaining remote web sites. The program will upload files to the server which have changed locally, and delete files from the server which have been removed locally, to keep the remote site synchronized with the local site with a single command. |
|
slsh |
2.3.3-2 |
This is a shell which is mostly just a wrapper around the S-Lang Interpreter, which is part of the S-Lang Library. |
|
smartd |
7.4-1 |
smartmontools contains utility programs (smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite. |
|
smartdns |
1.2023.43-1 |
SmartDNS is a local DNS server which accepts DNS query requests from local network clients, gets DNS query results from multiple upstream DNS servers concurrently, and returns the fastest IP to clients. Unlike dnsmasq's all-servers, smartdns returns the fastest IP, and encrypt DNS queries with DoT or DoH. |
|
smartmontools |
7.4-1 |
smartmontools contains utility programs (smartctl) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite. |
|
smartmontools-drivedb |
7.4-1 |
Database of known drives and USB bridges for smartctl and smartd. |
|
smcroute |
2.5.6-1a |
SMCRoute is a command line tool to manipulate the multicast routes of the Linux kernel. |
|
smstools3 |
3.1.21-4 |
The SMS Server Tools 3 is a SMS Gateway software which can send and receive short messages through GSM modems and mobile phones. |
|
sngrep |
1.6.0-1 |
sngrep is a tool for displaying SIP calls message flows from terminal. It supports live capture to display realtime SIP packets and can also be used as PCAP viewer. |
|
snmp-mibs |
5.9.4-2 |
Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP MIB-Files. |
|
snmp-utils |
5.9.4-2 |
Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains SNMP client utilities: - snmpbulkget - snmpbulkwalk - snmpdelta - snmpdf - snmpget - snmpgetnext - snmpnetstat - snmpset - snmpstatus - snmptable - snmptest - snmptranslate - snmptrap - snmpusm - snmpvacm - snmpwalk |
|
snmpd |
5.9.4-2 |
Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains the SNMP agent, dynamically linked. |
|
snmptrapd |
5.9.4-2 |
Simple Network Management Protocol (SNMP) is a widely used protocol for monitoring the health and welfare of network equipment (eg. routers), computer equipment and even devices like UPSs. Net-SNMP is a suite of applications used to implement SNMP v1, SNMP v2c and SNMP v3 using both IPv4 and IPv6. . This package contains the SNMP notification receiver. |
|
snowflake-go |
2.9.2-1 |
Snowflake is a system that allows people from all over the world to access censored websites and applications. Similar to how VPNs assist users in getting around Internet censorship, Snowflake helps you avoid being noticed by Internet censors by making your Internet activity appear as though you're using the Internet for a regular video or voice call. |
|
socat |
1.8.0.0-2 |
SoCat (for SOcket CAT) establishes two bidirectional byte streams and transfers data between them. Data channels may be files, pipes, devices (terminal or modem, etc.), or sockets (Unix, IPv4, IPv6, raw, UDP, TCP, SSL). It provides forking, logging and tracing, different modes for interprocess communication and many more options. |
|
sockd |
1.4.3-2 |
Dante is a circuit-level firewall/proxy that can be used to provide convenient and secure network connectivity, requiring only that the server Dante runs on has external network connectivity. Dante is used daily by Fortune 100 companies and large international organizations, either as a standard SOCKS server or as a "reverse proxy". This package provides the Dante sockd daemon. |
|
socksify |
1.4.3-2 |
Dante is a circuit-level firewall/proxy that can be used to provide convenient and secure network connectivity, requiring only that the server Dante runs on has external network connectivity. Dante is used daily by Fortune 100 companies and large international organizations, either as a standard SOCKS server or as a "reverse proxy". This package provides the Dante socksify client. |
|
softethervpn5-bridge |
5.02.5184-1 |
SoftEther VPN supports SSL-VPN, OpenVPN, L2TP, EtherIP, L2TPv3 and IPsec as a single VPN software. SoftEther VPN is not only an alternative VPN server to existing VPN products (OpenVPN, IPsec and MS-SSTP), but has also original strong SSL-VPN protocol to penetrate any kinds of firewalls. Guide: https://wordpress.tirlins.com/2015/03/setting-up-softether-vpn-on-openwrt/ Provides the vpnbridge (daemon). |
|
softethervpn5-client |
5.02.5184-1 |
SoftEther VPN supports SSL-VPN, OpenVPN, L2TP, EtherIP, L2TPv3 and IPsec as a single VPN software. SoftEther VPN is not only an alternative VPN server to existing VPN products (OpenVPN, IPsec and MS-SSTP), but has also original strong SSL-VPN protocol to penetrate any kinds of firewalls. Guide: https://wordpress.tirlins.com/2015/03/setting-up-softether-vpn-on-openwrt/ Provides the vpnclient. |
|
softethervpn5-libs |
5.02.5184-1 |
softethervpn5 v5.02.5184 libs |
|
softethervpn5-server |
5.02.5184-1 |
SoftEther VPN supports SSL-VPN, OpenVPN, L2TP, EtherIP, L2TPv3 and IPsec as a single VPN software. SoftEther VPN is not only an alternative VPN server to existing VPN products (OpenVPN, IPsec and MS-SSTP), but has also original strong SSL-VPN protocol to penetrate any kinds of firewalls. Guide: https://wordpress.tirlins.com/2015/03/setting-up-softether-vpn-on-openwrt/ Provides the vpnserver (daemon). |
|
softflowd |
1.1.0-2 |
Software netflow exporter |
|
spawn-fcgi |
1.6.4-2 |
spawn-fcgi is used to spawn fastcgi applications |
|
splix |
2.0.0-r315-2 |
SpliX is a set of CUPS printer drivers for SPL (Samsung Printer Language) printers. |
|
sqlite3-cli |
3410200-1 |
SQLite is a small C library that implements a self-contained, embeddable, zero-configuration SQL database engine. This package contains a terminal-based front-end to the SQLite (v3.x) library that can evaluate queries interactively and display the results in multiple formats. |
|
squashfs-tools-mksquashfs |
4.6.1-1 |
Tools to create and extract Squashfs filesystems mksquashfs |
|
squashfs-tools-unsquashfs |
4.6.1-1 |
Tools to create and extract Squashfs filesystems unsquashfs |
|
squeezelite-full |
1.9.9-1432-2 |
Squeezelite is a small headless squeezebox emulator for linux using alsa audio output It is aimed at supporting high quality audio at multiple sample rates including 44.1/48/88.2/96/176.4/192/352.8/384 kHz This package includes all features and codecs. Supported codecs: AAC, AIFF, ALAC, FLAC, MP3, Ogg, Opus, PCM and WMA Features: * Resampling to match sound device * DSD playback via PCM for DoP capable DAC |
|
squid |
6.10-1 |
Squid is a caching proxy for the Web supporting HTTP, HTTPS, FTP, and more. It reduces bandwidth and improves response times by caching and reusing frequently-requested web pages. |
|
squid-mod-cachemgr |
6.10-1 |
Web based proxy manager and reporting tool |
|
srelay |
0.4.8-1 |
A socks 4/5 proxy server |
|
ss |
4.4.0-10b |
Socket statistics utility |
|
sshfs |
3.7.2-3 |
Mount remote system over sftp. |
|
sshguard |
2.4.3-1 |
SSHGuard protects hosts from brute-force attacks against SSH and other services. It aggregates system logs and blocks repeat offenders using one of several firewall backends. |
|
ssldump |
1.8-1 |
ssldump is an SSLv3/TLS network protocol analyzer. It identifies TCP connections on the chosen network interface and attempts to interpret them as SSLv3/TLS traffic. When it identifies SSLv3/TLS traffic, it decodes the records and displays them in a textual form to stdout. If provided with the appropriate keying material, it will also decrypt the connections and display the application data traffic. |
|
sslh |
v1.23.1-1 |
SSL/SSH multiplexer |
|
sstp-client |
1.0.19-2 |
The advantage of SSTP compared to other vpn protocols like PPTP and L2TP is that it cannot be easily blocked by firewalls since the traffic is transmitted over HTTPS on port 443. This software has a similar commandline and configuration to the standard linux pptp-client software. Features: - Connect to Microsoft RAS network using SSTP - Use HTTPS with strong encryption over port 443 - Asynchronous HDLC frame support - Integration with pon/poff |
|
strace |
6.7-1 |
A useful diagnostic, instructional, and debugging tool. Allows you to track what system calls a program makes while it is running. |
|
streamripper |
1.65.0-alpha-20150804-2 |
Streamripper is an Open Source application that lets you record streaming mp3 to your hard drive. |
|
stress |
1.0.7-1 |
stress is a simple tool that imposes certain types of compute \ stress on UNIX-like operating systems. |
|
strongswan |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains shared libraries and scripts. |
|
strongswan-charon |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains charon, an IKEv2 keying daemon. |
|
strongswan-charon-cmd |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains the charon-cmd utility. |
|
strongswan-default |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This meta-package contains only dependencies to match upstream defaults. |
|
strongswan-full |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This meta-package contains dependencies for all of the strongswan plugins except kernel-libipsec, socket-dynamic and which are omitted in favor of the kernel-netlink and socket-default plugins. |
|
strongswan-gencerts |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains the X.509 certificate generation utility. |
|
strongswan-ipsec |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains the ipsec utility. |
|
strongswan-isakmp |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This meta-package contains only dependencies to establish ISAKMP / IKE PSK connections, dropping other capabilities in favor of small size Can fit most routers even with 4Mb flash (after removing IPv6 support). |
|
strongswan-libnttfft |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains the Number Theoretic Transforms library. |
|
strongswan-libtls |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains libtls for strongSwan plugins eap-tls, eap-ttls, eap-peap, tnc-tnccs |
|
strongswan-minimal |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This meta-package contains only dependencies for a minimal IKEv2 setup. |
|
strongswan-mod-addrblock |
5.9.14-3 |
StrongSwan RFC 3779 address block constraint support plugin |
|
strongswan-mod-aes |
5.9.14-3 |
StrongSwan AES crypto plugin |
|
strongswan-mod-af-alg |
5.9.14-3 |
StrongSwan AF_ALG crypto interface to Linux Crypto API plugin |
|
strongswan-mod-agent |
5.9.14-3 |
StrongSwan SSH agent signing plugin |
|
strongswan-mod-attr |
5.9.14-3 |
StrongSwan file based config plugin |
|
strongswan-mod-attr-sql |
5.9.14-3 |
StrongSwan SQL based config plugin |
|
strongswan-mod-bliss |
5.9.14-3 |
StrongSwan BLISS crypto plugin |
|
strongswan-mod-blowfish |
5.9.14-3 |
StrongSwan Blowfish crypto plugin |
|
strongswan-mod-ccm |
5.9.14-3 |
StrongSwan CCM AEAD wrapper crypto plugin |
|
strongswan-mod-chapoly |
5.9.14-3 |
StrongSwan ChaCha20-Poly1305 AEAD crypto plugin |
|
strongswan-mod-cmac |
5.9.14-3 |
StrongSwan CMAC crypto plugin |
|
strongswan-mod-connmark |
5.9.14-3 |
StrongSwan netfilter connection marking plugin |
|
strongswan-mod-constraints |
5.9.14-3 |
StrongSwan advanced X509 constraint checking plugin |
|
strongswan-mod-coupling |
5.9.14-3 |
StrongSwan IKEv2 plugin to couple peer certificates permanently to authentication plugin |
|
strongswan-mod-ctr |
5.9.14-3 |
StrongSwan Counter Mode wrapper crypto plugin |
|
strongswan-mod-curl |
5.9.14-3 |
StrongSwan cURL fetcher plugin plugin |
|
strongswan-mod-curve25519 |
5.9.14-3 |
StrongSwan Curve25519 Diffie-Hellman plugin |
|
strongswan-mod-des |
5.9.14-3 |
StrongSwan DES crypto plugin |
|
strongswan-mod-dhcp |
5.9.14-3 |
StrongSwan DHCP based attribute provider plugin |
|
strongswan-mod-dnskey |
5.9.14-3 |
StrongSwan DNS RR key decoding plugin |
|
strongswan-mod-drbg |
5.9.14-3 |
StrongSwan Deterministic random bit generator plugin |
|
strongswan-mod-duplicheck |
5.9.14-3 |
StrongSwan advanced duplicate checking plugin |
|
strongswan-mod-eap-dynamic |
5.9.14-3 |
StrongSwan EAP dynamic selector plugin |
|
strongswan-mod-eap-identity |
5.9.14-3 |
StrongSwan EAP identity helper plugin |
|
strongswan-mod-eap-md5 |
5.9.14-3 |
StrongSwan EAP MD5 (CHAP) EAP auth plugin |
|
strongswan-mod-eap-mschapv2 |
5.9.14-3 |
StrongSwan EAP MS-CHAPv2 EAP auth plugin |
|
strongswan-mod-eap-radius |
5.9.14-3 |
StrongSwan EAP RADIUS auth plugin |
|
strongswan-mod-eap-tls |
5.9.14-3 |
StrongSwan EAP TLS auth plugin |
|
strongswan-mod-farp |
5.9.14-3 |
StrongSwan fake arp respsonses plugin |
|
strongswan-mod-fips-prf |
5.9.14-3 |
StrongSwan FIPS PRF crypto plugin |
|
strongswan-mod-forecast |
5.9.14-3 |
StrongSwan forward multi/broadcast traffic plugin |
|
strongswan-mod-gcm |
5.9.14-3 |
StrongSwan GCM AEAD wrapper crypto plugin |
|
strongswan-mod-gcrypt |
5.9.14-3 |
StrongSwan libgcrypt plugin |
|
strongswan-mod-gmp |
5.9.14-3 |
StrongSwan libgmp plugin |
|
strongswan-mod-gmpdh |
5.9.14-3 |
StrongSwan DH-Groups; no libgmp dep plugin |
|
strongswan-mod-ha |
5.9.14-3 |
StrongSwan high availability cluster plugin |
|
strongswan-mod-hmac |
5.9.14-3 |
StrongSwan HMAC crypto plugin |
|
strongswan-mod-kdf |
5.9.14-3 |
StrongSwan KDF/PRF+ plugin |
|
strongswan-mod-kernel-libipsec |
5.9.14-3 |
StrongSwan libipsec kernel interface plugin |
|
strongswan-mod-kernel-netlink |
5.9.14-3 |
StrongSwan netlink kernel interface plugin |
|
strongswan-mod-ldap |
5.9.14-3 |
StrongSwan LDAP plugin |
|
strongswan-mod-led |
5.9.14-3 |
StrongSwan LED blink on IKE activity plugin |
|
strongswan-mod-load-tester |
5.9.14-3 |
StrongSwan load testing plugin |
|
strongswan-mod-md4 |
5.9.14-3 |
StrongSwan MD4 crypto plugin |
|
strongswan-mod-md5 |
5.9.14-3 |
StrongSwan MD5 crypto plugin |
|
strongswan-mod-mgf1 |
5.9.14-3 |
StrongSwan MGF1 crypto plugin |
|
strongswan-mod-mysql |
5.9.14-3 |
StrongSwan MySQL database interface plugin |
|
strongswan-mod-newhope |
5.9.14-3 |
StrongSwan New Hope crypto plugin |
|
strongswan-mod-ntru |
5.9.14-3 |
StrongSwan NTRU crypto plugin |
|
strongswan-mod-openssl |
5.9.14-3 |
StrongSwan OpenSSL crypto plugin |
|
strongswan-mod-pem |
5.9.14-3 |
StrongSwan PEM decoding plugin |
|
strongswan-mod-pgp |
5.9.14-3 |
StrongSwan PGP key decoding plugin |
|
strongswan-mod-pkcs1 |
5.9.14-3 |
StrongSwan PKCS1 key decoding plugin |
|
strongswan-mod-pkcs11 |
5.9.14-3 |
StrongSwan PKCS11 key decoding plugin |
|
strongswan-mod-pkcs12 |
5.9.14-3 |
StrongSwan PKCS12 key decoding plugin |
|
strongswan-mod-pkcs7 |
5.9.14-3 |
StrongSwan PKCS7 key decoding plugin |
|
strongswan-mod-pkcs8 |
5.9.14-3 |
StrongSwan PKCS8 key decoding plugin |
|
strongswan-mod-pubkey |
5.9.14-3 |
StrongSwan raw public key plugin |
|
strongswan-mod-random |
5.9.14-3 |
StrongSwan RNG plugin |
|
strongswan-mod-rc2 |
5.9.14-3 |
StrongSwan RC2 crypto plugin |
|
strongswan-mod-resolve |
5.9.14-3 |
StrongSwan DNS resolver plugin |
|
strongswan-mod-revocation |
5.9.14-3 |
StrongSwan X509 CRL/OCSP revocation plugin |
|
strongswan-mod-sha1 |
5.9.14-3 |
StrongSwan SHA1 crypto plugin |
|
strongswan-mod-sha2 |
5.9.14-3 |
StrongSwan SHA2 crypto plugin |
|
strongswan-mod-sha3 |
5.9.14-3 |
StrongSwan SHA3 and SHAKE crypto plugin |
|
strongswan-mod-smp |
5.9.14-3 |
StrongSwan SMP configuration and control interface plugin |
|
strongswan-mod-socket-default |
5.9.14-3 |
StrongSwan default socket implementation for charon plugin |
|
strongswan-mod-socket-dynamic |
5.9.14-3 |
StrongSwan dynamic socket implementation for charon plugin |
|
strongswan-mod-sql |
5.9.14-3 |
StrongSwan SQL database interface plugin |
|
strongswan-mod-sqlite |
5.9.14-3 |
StrongSwan SQLite database interface plugin |
|
strongswan-mod-sshkey |
5.9.14-3 |
StrongSwan SSH key decoding plugin |
|
strongswan-mod-stroke |
5.9.14-3 |
StrongSwan Stroke plugin |
|
strongswan-mod-test-vectors |
5.9.14-3 |
StrongSwan crypto test vectors plugin |
|
strongswan-mod-unity |
5.9.14-3 |
StrongSwan Cisco Unity extension plugin |
|
strongswan-mod-updown |
5.9.14-3 |
StrongSwan updown firewall plugin |
|
strongswan-mod-vici |
5.9.14-3 |
StrongSwan Versatile IKE Configuration Interface plugin |
|
strongswan-mod-whitelist |
5.9.14-3 |
StrongSwan peer identity whitelisting plugin |
|
strongswan-mod-wolfssl |
5.9.14-3 |
StrongSwan WolfSSL crypto plugin |
|
strongswan-mod-x509 |
5.9.14-3 |
StrongSwan x509 certificate plugin |
|
strongswan-mod-xauth-eap |
5.9.14-3 |
StrongSwan EAP XAuth backend plugin |
|
strongswan-mod-xauth-generic |
5.9.14-3 |
StrongSwan generic XAuth backend plugin |
|
strongswan-mod-xcbc |
5.9.14-3 |
StrongSwan xcbc crypto plugin |
|
strongswan-pki |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains the pki tool. |
|
strongswan-swanctl |
5.9.14-3 |
StrongSwan is an OpenSource IPsec implementation for the Linux operating system. This package contains the swanctl utility. |
|
stubby |
0.4.3-1 |
This package contains the Stubby daemon (which utilizes the getdns library). See https://github.com/openwrt/packages/blob/master/net/stubby/files/README.md for more details. |
|
stunnel |
5.72-1 |
Stunnel is a program that allows you to encrypt arbitrary TCP connections inside SSL (Secure Sockets Layer) available on both Unix and Windows. Stunnel can allow you to secure non-SSL aware daemons and protocols (like POP, IMAP, LDAP, etc) by having Stunnel provide the encryption, requiring no changes to the daemon's code. |
|
subversion-client |
1.14.3-1 |
Subversion is a free/open-source version control system. That is, Subversion manages files and directories, and the changes made to them, over time. This allows you to recover older versions of your data, or examine the history of how your data changed. In this regard, many people think of a version control system as a sort of time machine. This package contains the Subversion client tools. |
|
subversion-libs |
1.14.3-1 |
Subversion is a free/open-source version control system. That is, Subversion manages files and directories, and the changes made to them, over time. This allows you to recover older versions of your data, or examine the history of how your data changed. In this regard, many people think of a version control system as a sort of time machine. This package contains the Subversion libraries. |
|
subversion-server |
1.14.3-1 |
Subversion is a free/open-source version control system. That is, Subversion manages files and directories, and the changes made to them, over time. This allows you to recover older versions of your data, or examine the history of how your data changed. In this regard, many people think of a version control system as a sort of time machine. This package contains the Subversion server. |
|
sudo |
1.8.31-1 |
Sudo (su "do") allows a system administrator to delegate authority to give certain users (or groups of users) the ability to run some (or all) commands as root or another user while providing an audit trail of the commands and their arguments. |
|
sudoku-tui |
0.2.0-3 |
Play sudoku on the command line. (TUI interface) |
|
superstartrek |
0.0.21-2015-2 |
Super Star Trek is quite possibly the best of the Star Trek games from the 1970s. Of course, it does not make use of graphics, or even assume a video display, but it still an interesting game to play, particularly for those of us who don't have the reflexes we used to and prefer a more cerebral computer game. |
|
suricata |
4.1.8-6 |
The Suricata engine is capable of real time intrusion detection (IDS), inline intrusion prevention (IPS), network security monitoring (NSM) and offline pcap processing. Suricata inspects the network traffic using a powerful and extensive rules and signature language, and has powerful Lua scripting support for detection of complex threats. |
|
suricata-update |
1.3.3-1 |
The tool for updating your Suricata rules. |
|
suricata7 |
7.0.6-1 |
Suricata is the leading independent open source threat detection engine. By combining intrusion detection (IDS), intrusion prevention (IPS), network security monitoring (NSM) and PCAP processing, Suricata can quickly identify, stop, and assess the most sophisticated attacks. |
|
suricata7-extra |
7.0.6-1 |
Suricata is the leading independent open source threat detection engine. By combining intrusion detection (IDS), intrusion prevention (IPS), network security monitoring (NSM) and PCAP processing, Suricata can quickly identify, stop, and assess the most sophisticated attacks. |
|
suricata7-mini |
7.0.6-1 |
Suricata is the leading independent open source threat detection engine. By combining intrusion detection (IDS), intrusion prevention (IPS), network security monitoring (NSM) and PCAP processing, Suricata can quickly identify, stop, and assess the most sophisticated attacks. |
|
swap-utils |
2.40.1-1 |
contains: mkswap, swaplabel, swapon, swapoff |
|
syncthing |
1.27.9-1 |
Syncthing replaces proprietary sync and cloud services with something open, trustworthy and decentralized. Your data is your data alone and you deserve to choose where it is stored, if it is shared with some third party and how it's transmitted over the Internet. |
|
sysfsutils |
2.1.0-4a |
A utility built upon libsysfs that lists devices by bus, class, and topology. |
|
syslog-ng |
4.7.1-1 |
syslog-ng reads and logs messages to the system console, log files, other machines and/or users as specified by its configuration file. |
|
sysstat |
12.7.5-2 |
The sysstat utilities are a collection of performance monitoring tools for Linux. These include sar, sadf, mpstat, iostat, pidstat and sa tools. |
|
taglib |
2.0.1-1 |
TagLib is a library for reading and editing the metadata of several popular audio formats. Currently it supports both ID3v1 and ID3v2 for MP3 files, Ogg Vorbis comments and ID3 tags in FLAC, MPC, Speex, WavPack, TrueAudio, WAV, AIFF, MP4, APE, DSF, DFF, and ASF files. |
|
tailscale |
1.68.2-3 |
Zero config VPN. Installs on any device in minutes, manages firewall rules for you, and works from anywhere |
|
tang |
14-4 |
Tang is a small daemon for binding data to the presence of a third party. |
|
tar |
1.35-1 |
Tar is a program for packaging a set of files as a single archive in tar format. |
|
task-spooler |
1.3.0-1 |
Task spooler is a Unix batch system where the tasks spooled run one after the other. The amount of jobs to run at once can be set at any time. Each user in each system has his own job queue. The tasks are run in the correct context (that of enqueue) from any shell/process, and itask-spooler output/resultask-spooler can be easily watched. |
|
taskset |
2.40.1-1 |
contains: taskset |
|
taskwarrior |
2.5.3-3 |
taskwarrior is a command-line todo list manager |
|
tayga |
0.9.2-3 |
TAYGA is an out-of-kernel stateless NAT64 implementation for Linux. It uses the TUN driver to exchange packets with the kernel, which is the same driver used by OpenVPN and QEMU/KVM. |
|
tc |
4.4.0-10b |
Traffic control utility |
|
tcl |
8.6.11-2 |
Tcl, or Tool Command Language, is a an elegant, versatile, feature-rich, simple-to-learn yet very powerful industrial-strength open-source programming language and development platform. It is renowned for its stability and utility, and its emphasis on providing a cross-platform programming API makes it an ideal choice for an enormous variety of programming jobs. |
|
tcpdump |
4.99.4-1 |
Network monitoring and data acquisition tool |
|
tcpspray6 |
1.0.8-1 |
NDisc6 is a small collection of useful tools for IPv6 networking. tcpspray6: a TCP/IP Discard/Echo bandwidth metter |
|
tcptraceroute6 |
1.0.8-1 |
NDisc6 is a small collection of useful tools for IPv6 networking. tcptraceroute6: lightweight IPv6 tcptraceroute |
|
tdb |
1.4.3-2 |
TDB is a Trivial Database. In concept, it is very much like GDBM, and BSD's DB except that it allows multiple simultaneous writers and uses locking internally to keep writers from trampling on each other. TDB is also extremely small. |
|
telegraf |
1.31.1-1 |
Telegraf is an agent for collecting, processing, aggregating, and writing metrics. Design goals are to have a minimal memory footprint with a plugin system so that developers in the community can easily add support for collecting metrics. |
|
telegram-cli |
1.3.1-20160323-3 |
Telegram messenger command-line interface. |
|
temperusb |
2.3-1 |
RDing TEMPer v1.4 USB thermometer are cheap devices that can be sourced everywhere on the Internet. This package allows to operate them from user space. |
|
terminfo |
6.4-3 |
Terminal Info Database (ncurses) |
|
tesseract |
5.3.4-1 |
Tesseract Open Source OCR Engine |
|
tesseract-data-eng |
4.1.0-3 |
Training data for eng language |
|
tesseract-data-rus |
4.1.0-3 |
Training data for rus language |
|
testdisk |
7.2-1 |
TestDisk is powerful free data recovery software! It was primarily designed to help recover lost partitions and/or make non-booting disks bootable again when these symptoms are caused by faulty software: certain types of viruses or human error (such as accidentally deleting a Partition Table). Partition table recovery using TestDisk is really easy. |
|
tftp-hpa |
5.2-1 |
An enhanced version of the BSD TFTP client |
|
tftpd-hpa |
5.2-1 |
An enhanced version of the BSD TFTP server |
|
tidy-html5 |
5.8.0-1 |
The granddaddy of HTML tools, with support for modern standards. |
|
tiff-utils |
4.6.0-1 |
TIFF utilities |
|
time |
1.9-3 |
"time" is a program that measures many of the CPU resources, such as time and memory, that other programs use. The GNU version can format the output in arbitrary ways by using a printf-style format string to include various resource measurements. Some systems do not provide much information about program resource use; "time" reports unavailable information as zero values. |
|
tinc |
1.1pre18-4 |
tinc is a Virtual Private Network (VPN) daemon that uses tunnelling and encryption to create a secure private network between hosts on the Internet. |
|
tinycdb |
0.78-2 |
TinyCDB is a very fast and simple package for creating and reading constant data bases |
|
tinyproxy |
1.11.1-3 |
Tinyproxy is a lightweight HTTP and HTTPS proxy |
|
tmux |
3.4-1 |
tmux is a modern, BSD-licensed alternative to GNU screen. |
|
tor |
0.4.8.12-1 |
Tor is a toolset for a wide range of organizations and people that want to improve their safety and security on the Internet. Using Tor can help you anonymize web browsing and publishing, instant messaging, IRC, SSH, and more. Tor also provides a platform on which software developers can build new applications with built-in anonymity, safety, and privacy features. This package contains the full tor daemon. |
|
tor-gencert |
0.4.8.12-1 |
Tor is a toolset for a wide range of organizations and people that want to improve their safety and security on the Internet. Using Tor can help you anonymize web browsing and publishing, instant messaging, IRC, SSH, and more. Tor also provides a platform on which software developers can build new applications with built-in anonymity, safety, and privacy features. Generate certs and keys for Tor directory authorities. |
|
tor-geoip |
0.4.8.12-1 |
Tor is a toolset for a wide range of organizations and people that want to improve their safety and security on the Internet. Using Tor can help you anonymize web browsing and publishing, instant messaging, IRC, SSH, and more. Tor also provides a platform on which software developers can build new applications with built-in anonymity, safety, and privacy features. This package contains a GeoIP database mapping IP addresses to countries. |
|
tor-resolve |
0.4.8.12-1 |
Tor is a toolset for a wide range of organizations and people that want to improve their safety and security on the Internet. Using Tor can help you anonymize web browsing and publishing, instant messaging, IRC, SSH, and more. Tor also provides a platform on which software developers can build new applications with built-in anonymity, safety, and privacy features. Resolve a hostname to an IP address via tor. |
|
torrserver |
1.2.133-1 |
torrserver is a server to stream torrent via http to torrserv client. |
|
totd |
1.5.3-1 |
DNS proxy and translator for IPv6 and IPv4. |
|
trafficserver |
9.2.4-1 |
Apache Traffic Server™ is a fast, scalable and extensible HTTP/1.1 and HTTP/2 compliant caching proxy server. |
|
transcode |
1.1.5-1 |
Transcode is a suite of tools, all of which are command line utilities for transcoding various video, audio, and container formats. Please note it's compiled without any external recoding libraries because transcoding is too heavy task for a router. Only few tools will be usefull, i.e. tcprobe. |
|
transmission-cfp-cli |
2.77plus-20210309-1 |
CLI utilities for transmission. |
|
transmission-cfp-daemon |
2.77plus-20210309-1 |
Transmission is a simple BitTorrent client. It features a very simple, intuitive interface on top on an efficient, cross-platform back-end. This package contains the daemon itself. |
|
transmission-cfp-remote |
2.77plus-20210309-1 |
CLI remote interface for transmission. |
|
transmission-cfp-web |
2.77plus-20210309-1 |
Webinterface resources for transmission. |
|
transmission-cli |
4.0.6-1 |
CLI utilities for transmission. |
|
transmission-daemon |
4.0.6-1 |
Transmission is a simple BitTorrent client. It features a very simple, intuitive interface on top on an efficient, cross-platform back-end. This package contains the daemon itself. |
|
transmission-remote |
4.0.6-1 |
CLI remote interface for transmission. |
|
transmission-web |
4.0.6-1 |
Webinterface resources for transmission. |
|
transmission-web-control |
2021.09.25~4b2e1858-3 |
Transmission Web Control is a custom Web UI for Transmission. |
|
tree |
2.1.1-1 |
List contents of directories in a tree-like format |
|
triggerhappy |
0.5.0-2 |
triggerhappy - handle input events and run configured programs The daemon thd can handle hotplugged input devices and is configured through simple configuration files in /etc/triggerhappy/triggers.d/. |
|
trojan |
1.16.0-5 |
An unidentifiable mechanism that helps you bypass GFW. |
|
tsmuxer |
2.6.16-20240606-1 |
tsMuxer is a transport stream muxer for remuxing/muxing elementary streams, EVO/VOB/MPG, MKV/MKA, MP4/MOV, TS, M2TS to TS to M2TS. Supported video codecs H.264/AVC, H.265/HEVC, VC-1, MPEG2. Supported audio codecs AAC, (E-)AC3(DD+), DTS/ DTS-HD. |
|
tty-solitaire |
1.3.1-1 |
klondlike solitaire game. |
|
ttyd |
1.7.3-1 |
ttyd is a command-line tool for sharing terminal over the web. |
|
tune2fs |
1.47.0-2 |
Ext2 Filesystem tune utility |
|
tunsafe |
1.5rc2-1 |
A high performance and secure VPN client that uses the WireGuard protocol. TunSafe makes it extremely simple to setup blazingly fast and secure VPN tunnels between Windows and Linux. This is a user-mode implementation that also supports non-standard obfuscation and TCP mode. |
|
tvheadend |
2023-06-05-2 |
Tvheadend is a TV streaming server and recorder for Linux, FreeBSD and Android supporting DVB-S, DVB-S2, DVB-C, DVB-T, ATSC, IPTV, SAT>IP and HDHomeRun as input sources. Tvheadend offers the HTTP (VLC, MPlayer), HTSP (Kodi, Movian) and SAT>IP streaming. |
|
tvheadend_ndms |
4.2.6-7 |
Tvheadend is a TV streaming server and recorder for Linux, FreeBSD and Android supporting DVB-S, DVB-S2, DVB-C, DVB-T, ATSC, IPTV, SAT>IP and HDHomeRun as input sources. . Tvheadend offers the HTTP (VLC, MPlayer), HTSP (Kodi, Movian) and SAT>IP streaming. |
|
tvheadend_ndms_devel |
4.3.0-9 |
Warning! This is only developers version! Not recommendation for use, not stable! . Tvheadend is a TV streaming server and recorder for Linux, FreeBSD and Android supporting DVB-S, DVB-S2, DVB-C, DVB-T, ATSC, IPTV, SAT>IP and HDHomeRun as input sources. . Tvheadend offers the HTTP (VLC, MPlayer), HTSP (Kodi, Movian) and SAT>IP streaming. |
|
uacme |
1.7.4-1 |
lightweight client for ACMEv2 |
|
uacme-ualpn |
1.7.4-1 |
ualpn for uacme |
|
ubi-utils |
2.2.0-1 |
Utilities for manipulating memory technology devices. |
|
uboot-envtools |
2024.07-1 |
This package includes tools to read and modify U-Boot bootloader environment. |
|
udpxy |
1.0-25.1-3 |
udproxy makes it possible to convert UDP IPTV streams into HTTP streams which can be viewed even over WLANs. HTTP streams do not generate huge amounts of multicast traffic, so a sd stream only takes about 300k. Interesting for peoply who have IPTV at home and do not want to rent multiple decoders from their provider but just use their own streaming client (for example popcornhour/mediatomb/vlc). |
|
uhttpd_kn |
2023.06.25~34a8a74d-1 |
uHTTPd is a tiny single threaded HTTP server with TLS, CGI and Lua support. It is intended as a drop-in replacement for the Busybox HTTP daemon. |
|
ulogd |
2.0.8-1 |
Netfilter userspace logging daemon |
|
ulogd-mod-dbi |
2.0.8-1 |
Output plugin for logging to a database using libdbi |
|
ulogd-mod-extra |
2.0.8-1 |
Extra plugins |
|
ulogd-mod-json |
2.0.8-1 |
JSON output plugin |
|
ulogd-mod-mysql |
2.0.8-1 |
Output plugin for logging to a MySQL database |
|
ulogd-mod-nfacct |
2.0.8-1 |
Input plugin for flow-based logging (accounting) |
|
ulogd-mod-nfct |
2.0.8-1 |
Input plugin for flow-based logging (conntracking) |
|
ulogd-mod-nflog |
2.0.8-1 |
Input plugin using NFLOG |
|
ulogd-mod-pcap |
2.0.8-1 |
Output plugin for logging in pcap format |
|
ulogd-mod-pgsql |
2.0.8-1 |
Output plugin for logging to a PostgreSQL database |
|
ulogd-mod-sqlite |
2.0.8-1 |
Output plugin for logging to an SQLite database |
|
ulogd-mod-syslog |
2.0.8-1 |
Syslog output plugin |
|
ulogd-mod-xml |
2.0.8-1 |
XML output plugin |
|
umurmur-openssl |
0.2.20-2 |
Minimalistic Mumble server daemon. Uses OpenSSL library for SSL and crypto. |
|
unbound-anchor |
1.20.0-1 |
This package contains the Unbound anchor utility. |
|
unbound-checkconf |
1.20.0-1 |
This package contains the Unbound DNS configuration checker utility. |
|
unbound-control |
1.20.0-1 |
This package contains the Unbound control utility. |
|
unbound-control-setup |
1.20.0-1 |
This package contains the Unbound control setup utility. |
|
unbound-daemon |
1.20.0-1 |
This package contains the Unbound daemon including 'libevent', 'libmnl', and 'libpthread' to better handle large networks with heavy query loads. Options are available under libraries/network/libunbound to custom trim Unbound for smaller targets. |
|
unbound-host |
1.20.0-1 |
This package contains the Unbound DNS lookup utility. |
|
unfs3 |
0.9.23-20150511-1 |
UNFS3 is a user-space implementation of the NFSv3 server specification. It provides a daemon for the MOUNT and NFS protocols, which are used by NFS clients for accessing files on the server. |
|
unionfs-fuse |
3.5-1 |
unionfs filesystem implementation which is way more flexible than the current in-kernel unionfs solution. |
|
unix2dos |
7.5.2-1 |
Convert text files with DOS or Mac line breaks to Unix line breaks and vice versa. This package contains the unix2dos. |
|
unixodbc |
2.3.12-3 |
unixODBC is an Open Source ODBC sub-system and an ODBC SDK for Linux, Mac OSX, and UNIX. This package installs the unixODBC Driver Manager, Cursor, and Configuration libraries. This package is provided for backwards compatibility; these libraries are available in separate packages. |
|
unixodbc-tools |
2.3.12-3 |
unixODBC is an Open Source ODBC sub-system and an ODBC SDK for Linux, Mac OSX, and UNIX. This package provides command-line tools to help install a driver and work with SQL. |
|
unrar |
7.0.9-1 |
UnRAR is an application that can decompress files and archives created using the RAR compression scheme |
|
unshare |
2.40.1-1 |
run programs with some namespaces unshared from parent |
|
unzip |
6.0-8a |
InfoZIP's unzip program. With the exception of multi-volume archives (ie, .ZIP files that are split across several disks using PKZIP's /& option), this can handle any file produced either by PKZIP, or the corresponding InfoZIP zip program. |
|
upmpdcli |
1.8.11-1 |
upmpdcli implements an UPnP Media Renderer, using MPD to perform the real work. |
|
upx |
4.2.4-1 |
UPX is a free, portable, extendable, high-performance executable packer for several different executable formats. It achieves an excellent compression ratio and offers very fast decompression. Your executables suffer no memory overhead or other drawbacks for most of the formats supported, because of in-place decompression. |
|
uqmi |
2024.04.24~e7207bec-1 |
uqmi is a command line tool for controlling mobile broadband modems using the QMI-protocol. |
|
urbackup-server |
2.5.33-1 |
UrBackup is an easy to setup Open Source client/server backup system. |
|
usbids |
0.383-1 |
USB ID list |
|
usbip |
1.1.1-15 |
USB-over-IP (common) |
|
usbip-client |
1.1.1-15 |
USB-over-IP (client) |
|
usbip-server |
1.1.1-15 |
USB-over-IP (server) |
|
usbip2 |
2.0-3 |
USB-over-IP (common) |
|
usbip2-client |
2.0-3 |
USB-over-IP (client) |
|
usbip2-server |
2.0-3 |
USB-over-IP (server) |
|
usbrelay |
1.2.1-1 |
USB Relay driver for linux. |
|
usbutils |
017-1 |
USB devices listing utilities |
|
uuidd |
2.40.1-1 |
The uuidd daemon is used by the UUID library to generate universally unique identifiers (UUIDs), especially time-based UUIDs, in a secure and guaranteed-unique fashion, even in the face of large numbers of threads running on different CPUs trying to grab UUIDs. |
|
uuidgen |
2.40.1-1 |
The uuidgen program creates (and prints) a new universally unique identifier (UUID) using the libuuid library. The new UUID can reasonably be considered unique among all UUIDs created on the local system, and among UUIDs created on other systems in the past and in the future. |
|
uvcdynctrl |
0.2.5-4 |
The webcam-tools package contains the following two components: - libwebcam: Webcam Library (LGPL) - uvcdynctrl: Manage dynamic controls in uvcvideo (GPL) |
|
uw-imap |
2007f-5 |
The UW IMAP tookit includes the following: c-lient library : an API (application programming interface) used to build email clients and servers, including support for IMAP,POP3, SMTP and NNTP protocols and for local mailbox file access on Unix and Windows |
|
v2ray |
5.16.1-1 |
scripts & configs. |
|
v2ray-core |
5.16.1-1 |
A platform for building proxies to bypass network restrictions. |
|
v2ray-geoip |
202406270043-1 |
GeoIP List for V2Ray |
|
v2ray-geosite |
20240624143214-1 |
Geosite List for V2Ray |
|
v2ray-geosite-ir |
202407010032-1 |
Iran Geosite List for V2Ray |
|
v2ray-plugin |
5.15.1-1 |
Yet another SIP003 plugin for shadowsocks, based on v2ray. |
|
v2raya |
2.2.5.8-1 |
A web GUI client of Project V which supports VMess, VLESS, SS, SSR, Trojan, Tuic and Juicity protocols. |
|
v4l-utils |
1.26.1-2 |
libv4l is a collection of libraries which adds a thin abstraction layer on top of video4linux2 devices. The purpose of this (thin) layer is to make it easy for application writers to support a wide variety of devices without having to write separate code for different devices in the same class. libv4l consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2. libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent of the drivers for those devices supporting v4l1 compatibility (which many v4l2 drivers do not). libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the application transparent libv4lconvert conversion where necessary. This package contains the video4linux utilities. |
|
valgrind |
3.22.0-1 |
Valgrind is an award-winning suite of tools for debugging and profiling Linux programs. With the tools that come with Valgrind, you can automatically detect many memory management and threading bugs, avoiding hours of frustrating bug-hunting, making your programs more stable. You can also perform detailed profiling, to speed up and reduce memory use of your programs. |
|
valgrind-cachegrind |
3.22.0-1 |
debugging and profiling tools for Linux (cache profiling) |
|
valgrind-callgrind |
3.22.0-1 |
debugging and profiling tools for Linux (callgraph profiling) |
|
valgrind-drd |
3.22.0-1 |
debugging and profiling tools for Linux (thread error detection) |
|
valgrind-helgrind |
3.22.0-1 |
debugging and profiling tools for Linux (thread debugging) |
|
valgrind-massif |
3.22.0-1 |
debugging and profiling tools for Linux (heap profiling) |
|
valgrind-vgdb |
3.22.0-1 |
debugging and profiling tools for Linux (GDB interface) |
|
vblade |
v25-1 |
The vblade is a minimal ATA over Ethernet (AoE) storage target. Its focus is simplicity, not performance or richness of features. It exports a seekable file available over an ethernet local area network (LAN) via the AoE data storage protocol. |
|
view1090 |
9.0-3 |
View1090 is a Mode S messages viewer for dump1090 devices. |
|
vim |
9.0-1 |
Vim is an almost compatible version of the UNIX editor Vi. (Tiny build) |
|
vim-full |
9.0-1 |
Vim is an almost compatible version of the UNIX editor Vi. (Normal build) |
|
vim-help |
9.0-1 |
Vim is an almost compatible version of the UNIX editor Vi. (Help files) |
|
vim-runtime |
9.0-1 |
Vim is an almost compatible version of the UNIX editor Vi. (Runtime files) |
|
vitetris |
0.59.1-1 |
Vitetris is a terminal-based Tetris clone by Victor Nilsson. Gameplay is much like the early Tetris games by Nintendo. Features include: configurable keys, highscore table, two-player mode with garbage, network play. |
|
vnstat |
1.18-3 |
vnStat is a network traffic monitor for Linux that keeps a log of daily network traffic for the selected interface(s). vnStat isn't a packet sniffer. The traffic information is analyzed from the /proc -filesystem, so vnStat can be used without root permissions. |
|
vnstat2 |
2.12-1 |
vnStat is a network traffic monitor for Linux that keeps a log of daily network traffic for the selected interface(s). vnStat isn't a packet sniffer. The traffic information is analyzed from the /proc -filesystem, so vnStat can be used without root permissions. |
|
vnstati |
1.18-3 |
The purpose of vnstati is to provide image output support for statistics collected using vnstat(1). However, the image file format is limited to png. All basic outputs of vnStat are supported excluding live traffic features. The image can be outputted either to a file or to standard output. |
|
vnstati2 |
2.12-1 |
The purpose of vnstati is to provide image output support for statistics collected using vnstat. However, the image file format is limited to png. All basic outputs of vnStat are supported excluding live traffic features. The image can be outputted either to a file or to standard output. |
|
vobstreamer |
2024.06.26-1 |
LIVE555 Streaming Media (vobStreamer) |
|
vorbis-tools |
1.4.2-1 |
oggdec, oggenc, ogginfo, vcut, vorbiscomment command line utilities. |
|
vpnc |
2022.05.17~5c0ea6a3-1 |
A VPN client compatible with Cisco's EasyVPN equipment. Supports IPSec (ESP) with Mode Configuration and Xauth. Supports only shared-secret IPSec authentication with Xauth, AES (256, 192, 128), 3DES, 1DES, MD5, SHA1, DH1/2/5/14/15/16/17/18 and IP tunneling. |
|
vpnc-scripts |
20151220-3 |
This package contains the vpnc-script which is used by vpnc and OpenConnect to configure the tunnel interface. |
|
vsftpd |
3.0.5-2 |
Fast and secure FTP server (no TLS) |
|
vsftpd-ext |
3.0.5-1 |
A fast and secure FTP server |
|
vsftpd-tls |
3.0.5-2 |
Fast and secure FTP server (TLS) |
|
vtun |
3.0.4-4 |
VPN tunneling daemon |
|
w_scan |
20210218-2 |
w_scan is a small command line utility used to perform frequency scans for DVB and ATSC transmissions. |
|
wakeonlan |
0.41-1 |
With this package you can remotely wake up and power on machines which have motherboards or network cards that support 'Wake-on-Lan' packets. . The tool allows you to wake up a single machine, or a group of machines. . You need the MAC addresses of machines to construct the WOL packets, but, in contrast to 'etherwake', you do not need root privileges to use the program itself as UDP packets are used. |
|
wall |
2.40.1-1 |
wall sends a message to everybody logged in with their mesg permission set to yes |
|
wcd |
6.0.5-1 |
WCD (Wherever Change Directory) is a command-line program to change directory fast. It saves time typing at the keyboard. One needs to type only a part of a directory name and wcd will jump to it. Wcd has a fast selection method in case of multiple matches and allows aliasing and banning of directories. Wcd also includes a full screen interactive directory tree browser with speed search. |
|
wdfs |
1.4.2-3 |
wdfs is a webdav filesystem that makes it possible to mount a webdav share under linux, freebsd and apple mac os x. wdfs has some special features for accessing subversion repositories via webdav. |
|
weechat |
4.3.4-1 |
Weechat is fast, light & extensible IRC client. |
|
wg-quick |
1.0.20210914-1 |
This is an extremely simple script for easily bringing up a WireGuard interface, suitable for a few common use cases. |
|
wget-nossl |
1.24.5-1 |
Wget is a network utility to retrieve files from the Web using http and ftp, the two most widely used Internet protocols. It works non-interactively, so it will work in the background, after having logged off. The program supports recursive retrieval of web-authoring pages as well as ftp sites -- you can use wget to make mirrors of archives and home pages or to travel the Web like a WWW robot. This package is built without SSL support. |
|
wget-ssl |
1.24.5-1 |
Wget is a network utility to retrieve files from the Web using http and ftp, the two most widely used Internet protocols. It works non-interactively, so it will work in the background, after having logged off. The program supports recursive retrieval of web-authoring pages as well as ftp sites -- you can use wget to make mirrors of archives and home pages or to travel the Web like a WWW robot. This package is built with SSL support. |
|
whereis |
2.40.1-1 |
whereis locates source/binary and manuals sections for specified files |
|
which |
2.21-1 |
The which command shows the full pathname of a specified program, if the specified program is in your PATH. |
|
whiptail |
0.52.24-1 |
A lightweight replacement for the dialog command (dialog boxes from shell scripts), based on libnewt. |
|
whob |
3.91-1 |
LFT, short for Layer Four Traceroute, is a sort of 'traceroute' that often works much faster (than the commonly-used Van Jacobson method) and goes through many configurations of packet-filters (firewalls). More importantly, LFT implements numerous other features including AS number lookups through several reliable sources, loose source routing, netblock name lookups, et al. This package contains the whob 'whois' program. |
|
whois |
5.5.23-1 |
This client is intelligent and can automatically select the appropriate whois server for most queries. The internal database is often more accurate than IANA's published one, but please send me any information you have regarding domains and network resources which are not correctly handled by the program. |
|
wipefs |
2.40.1-1 |
wipefs can erase filesystem, raid or partition table signatures (magic strings) from the specified device to make the signature invisible for libblkid. |
|
wireguard-go |
v0.0.20230223-1 |
This is an implementation of WireGuard in Go. |
|
wireguard-tools |
1.0.20210914-3 |
WireGuard is a novel VPN that runs inside the Linux Kernel and utilizes state-of-the-art cryptography. It aims to be faster, simpler, leaner, and more useful than IPSec, while avoiding the massive headache. It intends to be considerably more performant than OpenVPN. WireGuard is designed as a general purpose VPN for running on embedded interfaces and super computers alike, fit for many different circumstances. It uses UDP. This package provides the userspace control program for WireGuard, `wg(8)`, a netifd protocol helper, and a re-resolve watchdog script. |
|
wireguard-ui |
0.6.2-1 |
A web user interface to manage your WireGuard setup. |
|
wireshark |
3.6.24-1 |
Wireshark is the world’s foremost and widely-used network protocol analyzer. |
|
wput |
0.6.2-3 |
Wput is a tiny ftp-client, that uploads files or directories to a remote ftp-server. Main features are: resuming, time-stamping, wget-like interface, proxy-support and speed-limit. |
|
wsdd2 |
2023.12.21~b676d8ac-2 |
Web Services for Devices or Web Services on Devices (WSD), is a Microsoft API to simplify programming connections to web service enabled devices, such as printers, scanners and file shares. This daemon advertises and responds to probe requests from Windows clients looking for file shares. It also implements LLMNR multicast name lookup services. |
|
wstunnel |
9.7.2-1 |
Tunnel all your traffic over Websocket or HTTP2. |
|
wview |
5.21.7-1 |
Wview is a collection of linux/unix daemons which interface with a supported weather station to retrieve archive records (if generated by the station) and current conditions. If the station does not generate archive records internally, wview will auto-generate archive records based on the sensor readings collected for that interval. The archive records and High/Low (HILOW) data are stored in SQLite3 databases. At a configurable interval, wview will utilize the archive history and current conditions to generate weather images (buckets, dials and graphs) and HTML web pages based on user-configurable HTML templates. After install you need to create a directory holding archive and create the database there by running there sqlite3 wview-archive.sdb '.read /opt/etc/wview/wview-archive.sql' Then copy all your theme files to the appropriate place (on a non-volatile storage), and html-templates.conf to /opt/etc/wview/; then wviewconfig to configure the system. Read and amend /opt/etc/init.d/wview appropriately for your particular setup! |
|
xawtv |
3.105-1 |
A small suite of applications for V4L devices. |
|
xfs-admin |
6.2.0-1 |
Utilities for changing parameters of an XFS filesystems |
|
xfs-fsck |
6.2.0-1 |
Utilities for checking and repairing XFS filesystems |
|
xfs-growfs |
6.2.0-1 |
Utility for increasing the size of XFS filesystems |
|
xfs-mkfs |
6.2.0-1 |
Utility for creating XFS filesystems |
|
xinetd |
2.3.15-16 |
xinetd has access control mechanisms, extensive logging capabilities, the ability to make services available based on time, can place limits on the number of servers that can be started, and has deployable defence mechanisms to protect against port scanners, among other things. |
|
xl2tpd |
1.3.18-1 |
l2tpd is the open source implementation of the L2TP tunneling protocol (RFC2661). It does implement both LAC and LNS role in a L2TP networking architecture. The main goal of this protocol is to tunnel PPP frame trough an IP network. |
|
xmail |
1.27-2 |
XMail is an Internet mail server featuring an SMTP, POP3 and finger server. It's incredibly easy to set up and has lots of features including : multiple domains, virtual users and spam protection. |
|
xmlrpc-c-abyss |
1.59.03-1 |
XML-RPC library - abyss |
|
xmlrpc-c-client |
1.59.03-1 |
XML-RPC library - client |
|
xmlrpc-c-common |
1.59.03-1 |
Programming library for writing an XML-RPC server or client in C or C++. XML-RPC is a standard network protocol to allow a client program to make a simple remote procedure call (RPC) type request of a server. |
|
xmlrpc-c-internal |
1.59.03-1 |
Programming library for writing an XML-RPC server or client in C or C++. XML-RPC is a standard network protocol to allow a client program to make a simple remote procedure call (RPC) type request of a server. Uses internal expat variant (stripped down) |
|
xmlrpc-c-libxml2 |
1.59.03-1 |
Programming library for writing an XML-RPC server or client in C or C++. XML-RPC is a standard network protocol to allow a client program to make a simple remote procedure call (RPC) type request of a server. Uses external libxml2 library (quite big) |
|
xmlrpc-c-server |
1.59.03-1 |
XML-RPC library - server |
|
xmlrpc-c-server-abyss |
1.59.03-1 |
XML-RPC library - abyss server |
|
xmlstarlet |
1.6.1-3 |
XMLStarlet is a set of command line utilities (tools) which can be used to transform, query, validate, and edit XML documents and files using simple set of shell commands in similar way it is done for plain text files using UNIX grep, sed, awk, diff, patch, join, etc commands. |
|
xpdf |
4.05-1 |
Xpdf project includes a PDF text extractor, PDF-to-PostScript converter, and various other utilities. |
|
xray |
1.8.18-1 |
scripts & configs. |
|
xray-core |
1.8.18-1 |
Project X originates from XTLS protocol, providing a set of network tools. |
|
xray-plugin |
1.8.17-1 |
Yet another SIP003 plugin for shadowsocks, based on Xray-core. |
|
xsltproc |
1.1.39-1 |
XSLT XML transformation utility. |
|
xtables-addons_legacy |
1.47.1-2 |
Extensions not distributed in the main Xtables (1.47.1 legacy version) |
|
xupnpd |
2018-11-20-2 |
xupnpd - eXtensible UPnP agent This program is a light DLNA Media Server which provides ContentDirectory:1 service for sharing IPTV unicast streams over local area network (with udpxy for multicast to HTTP unicast conversion). The program shares UTF8-encoded M3U playlists with links over local area network as content of the directory. You can watch HDTV broadcasts (multicast or unicast) and listen Internet Radio in IP network without transcoding and PC. |
|
xupnpd2 |
2.0-20231215-1 |
This program is a light DLNA Media Server which provides ContentDirectory:1 service for sharing IPTV unicast streams over local area network (with udpxy for multicast to HTTP unicast conversion). The program shares UTF8-encoded M3U playlists with links over local area network as content of the directory. You can watch HDTV broadcasts (multicast or unicast) and listen Internet Radio in IP network without transcoding and PC. |
|
xxd |
9.0-1 |
xxd creates a hex dump of a given file or standard input, it can also convert a hex dump back to its original binary form. |
|
xxhash |
0.8.2-2 |
xxHash is an Extremely fast Hash algorithm, running at RAM speed limits. It successfully completes the SMHasher test suite which evaluates collision, dispersion and randomness qualities of hash functions. Code is highly portable, and hashes are identical on all platforms (little / big endian). This package contains the executables. |
|
xz |
5.4.6-1 |
Contains: xz lzcat lzma unlzma unxz xzcat |
|
xz-utils |
5.4.6-1 |
XZ Utils (meta) |
|
xzdec |
5.4.6-1 |
Contains: xzdec |
|
xzdiff |
5.4.6-1 |
Contains: xzdiff lzcmp lzdiff xzcmp |
|
xzgrep |
5.4.6-1 |
Contains: xzgrep lzegrep lzfgrep lzgrep xzegrep xzfgrep |
|
xzless |
5.4.6-1 |
Contains: xzless lzless |
|
xzmore |
5.4.6-1 |
Contains: xzmore lzmore |
|
yajl |
2.1.0-3 |
Yet Another JSON Library. YAJL is a small event-driven (SAX-style) JSON parser written in ANSI C, and a small validating JSON generator. YAJL is released under the ISC license. YAJL was created by Lloyd Hilaiel. |
|
yamdi |
1.9-1 |
yamdi stands for Yet Another MetaData Injector and is a metadata injector for FLV files. It adds the onMetaData event to your FLV files. |
|
yggdrasil-go |
0.5.6-1 |
Yggdrasil builds end-to-end encrypted networks with IPv6. Beyond the similarities with cjdns is a different routing algorithm. This globally-agreed spanning tree uses greedy routing in a metric space. Back-pressure routing techniques allow advanced link aggregation bonding on per-stream basis. In turn, a single stream will span across multiple network interfaces simultaneously with much greater throughput. |
|
ykclient |
2.15-3 |
YubiKey C Client Library (libykclient) |
|
ympd |
1.3.0-20180329-1 |
Standalone MPD Web GUI written in C, utilizing Websockets and Bootstrap/JS. |
|
yt-dlp |
2024.5.27-1 |
yt-dlp is a small command-line program to download videos from YouTube.com and other video sites. It requires the Python3 interpreter. |
|
zabbix-agentd |
7.0.0-1 |
Zabbix agentd |
|
zabbix-agentd-openssl |
7.0.0-1 |
Zabbix agentd (with OpenSSL) |
|
zabbix-get |
7.0.0-1 |
Zabbix get |
|
zabbix-get-openssl |
7.0.0-1 |
Zabbix get (with OpenSSL) |
|
zabbix-proxy |
7.0.0-1 |
Zabbix proxy |
|
zabbix-proxy-openssl |
7.0.0-1 |
Zabbix proxy (with OpenSSL) |
|
zabbix-sender |
7.0.0-1 |
Zabbix sender |
|
zabbix-sender-openssl |
7.0.0-1 |
Zabbix sender (with OpenSSL) |
|
zabbix-server |
7.0.0-1 |
Zabbix server |
|
zabbix-server-frontend |
7.0.0-1 |
Zabbix server-frontend |
|
zabbix-server-openssl |
7.0.0-1 |
Zabbix server (with OpenSSL) |
|
zbar |
0.23.93-1 |
ZBar Bar Code Reader is an open source software suite for reading bar codes from various sources, such as video streams, image files and raw intensity sensors. It supports EAN-13/UPC-A, UPC-E, EAN-8, Code 128, Code 93, Code 39, Codabar, Interleaved 2 of 5, QR Code and SQ Code. |
|
zerotier |
1.14.0-1 |
ZeroTier creates a global provider-independent virtual private cloud network. |
|
zile |
2.3.24-6 |
Zile is a small Emacs clone. Zile is a customizable, self-documenting real-time display editor. Zile was written to be as similar as possible to Emacs; every Emacs user should feel at home with Zile. |
|
zipcmp |
1.10.1-1 |
This package contains the command line tool zipcmp from libzip. |
|
zipmerge |
1.10.1-1 |
This package contains the command line tool zipmerge from libzip. |
|
ziproxy |
3.3.2-1 |
ziproxy is a forwarding, non-caching and compressing HTTP proxy server. Basically it squeezes images by converting them to lower quality JPEGs and compresses (gzip) HTML and other text-like data. |
|
ziptool |
1.10.1-1 |
This package contains the command line tool ziptool from libzip. |
|
zlib |
1.3.1-1 |
zlib is a lossless data-compression library. This package includes the shared library. |
|
zlib-dev |
1.3.1-1 |
zlib is a lossless data-compression library. This package includes the development support files. |
|
znc |
1.9.0-1 |
ZNC is an IRC bouncer with many advanced features like detaching, multiple users, per channel playback buffer, SSL, IPv6, transparent DCC bouncing, and c++ module support to name a few. |
|
znc-mod-adminlog |
1.9.0-1 |
Log user connects and disconnects and failed logins to file or syslog. |
|
znc-mod-alias |
1.9.0-1 |
Provides bouncer-side command alias support. |
|
znc-mod-autoattach |
1.9.0-1 |
Reattaches you to channels on activity. |
|
znc-mod-autocycle |
1.9.0-1 |
Cycles a channel when you are the only one in there and you don't have op. |
|
znc-mod-autoop |
1.9.0-1 |
Auto op the good guys. |
|
znc-mod-autoreply |
1.9.0-1 |
Gives a automatic reply if someone messages you if you are away. |
|
znc-mod-autovoice |
1.9.0-1 |
Autovoices everyone who joins some channel. |
|
znc-mod-awaynick |
1.9.0-1 |
Change your nick while you are away. |
|
znc-mod-awaystore |
1.9.0-1 |
Stores messages while away, also auto away. |
|
znc-mod-block-motd |
1.9.0-1 |
This module blocks the server's Message of the Day. |
|
znc-mod-blockuser |
1.9.0-1 |
Blocks certain users from using ZNC saying their account was disabled. |
|
znc-mod-bouncedcc |
1.9.0-1 |
Bounces dcc transfers through the znc server instead of sending them directly to the user. |
|
znc-mod-buffextras |
1.9.0-1 |
Add nick changes, joins, parts, topic changes etc. to your playback buffer. |
|
znc-mod-cert |
1.9.0-1 |
Use a SSL certificate for connecting to a server. |
|
znc-mod-certauth |
1.9.0-1 |
This module allows users to log in to ZNC via SSL client keys. |
|
znc-mod-chansaver |
1.9.0-1 |
Keeping config up to date when user joins and parts. |
|
znc-mod-clearbufferonmsg |
1.9.0-1 |
This module keeps the buffer until the next message from the client. |
|
znc-mod-clientnotify |
1.9.0-1 |
Notify about new incoming connections to your user. |
|
znc-mod-controlpanel |
1.9.0-1 |
Allows you to add/remove/edit users and settings on the fly via IRC messages. |
|
znc-mod-crypt |
1.9.0-1 |
Encryption for channel/private messages. |
|
znc-mod-ctcpflood |
1.9.0-1 |
This module tries to block ctcp floods. |
|
znc-mod-dcc |
1.9.0-1 |
Allows you to transfer files to and from ZNC. |
|
znc-mod-disconkick |
1.9.0-1 |
This module will kick your client from all channels where you are, in case if ZNC disconnects from server. |
|
znc-mod-fail2ban |
1.9.0-1 |
Block IPs for some time after a failed login. |
|
znc-mod-flooddetach |
1.9.0-1 |
This module detaches you from channels which are flooded. |
|
znc-mod-identfile |
1.9.0-1 |
Places the ident of a user to a file when they are trying to connect. |
|
znc-mod-imapauth |
1.9.0-1 |
Allow users to authenticate via IMAP. |
|
znc-mod-keepnick |
1.9.0-1 |
Tries to get you your primary nick. |
|
znc-mod-kickrejoin |
1.9.0-1 |
Implements auto-rejoin-on-kick. |
|
znc-mod-lastseen |
1.9.0-1 |
Logs when a user last logged in to ZNC. |
|
znc-mod-listsockets |
1.9.0-1 |
This module displays a list of all open sockets in ZNC. |
|
znc-mod-log |
1.9.0-1 |
Log conversations to file. |
|
znc-mod-missingmotd |
1.9.0-1 |
Sends 422 to clients when they login. |
|
znc-mod-modules_online |
1.9.0-1 |
This module fakes the online status of ZNC-*users. |
|
znc-mod-nickserv |
1.9.0-1 |
Auths you with NickServ. |
|
znc-mod-notes |
1.9.0-1 |
This modules stores and displays short notes using a key/note pairs and shows them to you on connect. |
|
znc-mod-notify-connect |
1.9.0-1 |
Sends a notice to all admins when a user logs in or out. |
|
znc-mod-perform |
1.9.0-1 |
Performs commands on connect. |
|
znc-mod-playback |
1.9.0-1 |
Avoid repetitive playback buffers on re-connect with supported clients (e.g. mutter, colluquy) |
|
znc-mod-push |
1.9.0-1 |
Send push notification to connected and configured devices. Refer to project Documentation on how to setup. |
|
znc-mod-raw |
1.9.0-1 |
View all of the raw traffic. |
|
znc-mod-route-replies |
1.9.0-1 |
Routes back answers to the right client when connected with multiple clients. |
|
znc-mod-sasl |
1.9.0-1 |
The SASL module allows you to authenticate to an IRC network via SASL. |
|
znc-mod-savebuff |
1.9.0-1 |
Saves your channel buffers into an encrypted file so they can survive restarts and reboots. |
|
znc-mod-schat |
1.9.0-1 |
SSL (encrypted) DCC chats. |
|
znc-mod-send-raw |
1.9.0-1 |
Allows you to send raw traffic to IRC from other users. |
|
znc-mod-shell |
1.9.0-1 |
Have your unix shell in a query window right inside of your IRC client. |
|
znc-mod-simple-away |
1.9.0-1 |
This module will automatically set you away on IRC while you are disconnected from the bouncer. |
|
znc-mod-stickychan |
1.9.0-1 |
Keeps you sticked to specific channels. |
|
znc-mod-watch |
1.9.0-1 |
Monitor activity for specific text patterns from specific users and have the text sent to a special query window. |
|
znc-mod-webadmin |
1.9.0-1 |
Allows you to add/remove/edit users and settings on the fly via a web browser. |
|
znc-webskin-dark-clouds |
1.9.0-1 |
dark-clouds webskin for webadmin |
|
znc-webskin-forest |
1.9.0-1 |
forest webskin for webadmin |
|
znc-webskin-ice |
1.9.0-1 |
ice webskin for webadmin |
|
zoneinfo-africa |
2024a-1 |
Zone Information (Africa) |
|
zoneinfo-all |
2024a-1 |
Zone Information (all zones) |
|
zoneinfo-america |
2024a-1 |
Zone Information (America North/South) |
|
zoneinfo-asia |
2024a-1 |
Zone Information (Asia) |
|
zoneinfo-atlantic |
2024a-1 |
Zone Information (Atlantic Ocean) |
|
zoneinfo-australia-nz |
2024a-1 |
Zone Information (Australia-NZ) |
|
zoneinfo-core |
2024a-1 |
Zone Information (core) |
|
zoneinfo-europe |
2024a-1 |
Zone Information (Europe) |
|
zoneinfo-indian |
2024a-1 |
Zone Information (Indian Ocean) |
|
zoneinfo-pacific |
2024a-1 |
Zone Information (Pacific Ocean) |
|
zoneinfo-poles |
2024a-1 |
Zone Information (Arctic, Antarctic) |
|
zoneinfo-simple |
2024a-1 |
Zone Information (simple) |
|
zork |
1.0-20180131-1 |
Zork (also named as Dungeon) is a text adventure game written by Tim Anderson, Marc Blank, Bruce Daniels, and Dave Lebling in 1980. |
|
zoxide |
0.9.4-1 |
zoxide is a smarter cd command, inspired by z and autojump. It remembers which directories you use most frequently, so you can "jump" to them in just a few keystrokes. |
|
zsh |
5.9-3 |
Zsh is a UNIX command interpreter (shell) usable as an interactive login shell and as a shell script command processor. Of the standard shells, zsh most closely resembles ksh but includes many enhancements. Zsh has command line editing, builtin spelling correction, programmable command completion, shell functions (with autoloading), a history mechanism, and a host of other features. |
|
zstd |
1.5.6-1 |
Zstandard - Fast real-time compression algorithm. This package provides the zstd binaries. |